How do you dilute wet and forget? Mixing Instructions Wet & Forget's mixing ratio is 1 part Wet & Forget to 5 parts water. For a 1-Gallon sized garden pump sprayer, pour 20 oz (2.5 cups) of Wet & Forget into your sprayer. Next, fill the sprayer with water to the 1-Gallon marker and you're ready to go. Click to see full answer.
How do you dilute wet and forget spray?
How do you dilute wet and forget? Wet & Forget's mixing ratio is 1 part Wet & Forget to 5 parts water. For a 1-Gallon sized garden pump sprayer, pour 20 oz (2.5 cups) of Wet & Forget into your sprayer. Next, fill the sprayer with water to the 1-Gallon marker and you're ready to go.
How do you use wet and forget cleaning products?
Whether you need to clean flooring, shelving or glass, Wet & Forget Indoor is an ideal solution for cleaning a retail space effectively. Try and use Wet & Forget as part of a deep clean on a shop space, ideally overnight or over the course of 24 hours so it can be allowed to dry without further contact from customers.
How do you mix wet and forget outdoor concentrate?
Mix Wet & Forget Outdoor Concentrate and water in a pump garden sprayer, in a 1 to 5 ratio. (1 part product to 5 parts water). Spray down your exterior surface with Wet & Forget.
What is the dilution rate for wet&forget?
Dilute 1 part Wet & Forget Outdoor to 5 parts water. Should the dilution rate be changed for Wet & Forget? No, Wet & Forget works best when the dilution rate is 1 part Wet & Forget to 5 parts water. What is the coverage area of Wet & Forget?
How much Wet & Forget do you mix with water?
1 to 5 ratioMix Wet & Forget Outdoor Concentrate and water in a pump garden sprayer, in a 1 to 5 ratio. (1 part product to 5 parts water). Spray down your exterior surface with Wet & Forget. It's best to apply then no rain is in the forecast and when the temperature remains above freezing.
Do you mix wet and forget with water?
Wet & Forget's mixing ratio is 1 part Wet & Forget to 5 parts water. For a 1-Gallon sized garden pump sprayer, pour 20 oz (2.5 cups) of Wet & Forget into your sprayer. Next, fill the sprayer with water to the 1-Gallon marker and you're ready to go.
Do you have to dilute wet and forget?
Yes, Wet & Forget Ready-To-Use is pre-mixed so no water is needed and there's no rinsing after application.
Does it need to rain for wet and forget to work?
Make sure you apply Wet and Forget on a dry day, without any rain for at least 4-5 hours (summer months with the least chance of rain are preferable). Always use 5 parts water and 1 part Wet and Forget. Apply using a garden sprayer or as liberally as possible to get an even coverage.
Can you refill Wet and Forget hose end sprayer with concentrate?
0:000:37Wet And Forget Outdoor Cleaner Hose End Refill - YouTubeYouTubeStart of suggested clipEnd of suggested clipSimply swap out the extreme reach nozzle from your original bottle to the new refill.MoreSimply swap out the extreme reach nozzle from your original bottle to the new refill.
Can you use Wet and Forget with a hose end sprayer?
Yes, you can use Wet & Forget Xtreme Reach™ Hose End on any outdoor material. Clean brick, vinyl, asphalt, rubber or any other surface. The hose end product is best suited for large surfaces and high elevations. The hose end is ideal for quickly cleaning roofs, siding or large patios.
How do you make homemade Wet and Forget?
Pour 3 tbsp. of dish detergent, 2 cups of bleach and 1 cup of alcohol into a 5-gallon bucket. Add 1 gallon of water. Stir the mixture until everything is incorporated.
Is Wet and Forget better than bleach?
Bleach based products will harm any plants and vegetation they come in contact with near the outdoor surfaces you are cleaning, not to mention spotting up your clothes and damaging your sprayer equipment. Wet & Forget is much gentler on surrounding vegetation and will not harm your sprayer equipment.
How many ounces of Wet and Forget per gallon of water?
128 oz.Dilute 1 part Wet & Forget Outdoor to 5 parts water. 2 1/2 cups (20 oz.) 5 cups (40 oz.)...Wet & Forget ConcentrateMakesCoverage Area1-gallon (128 oz.)6-gallons750–2,250 sq. ft.1.5-gallons (192 oz.)9-gallons1,100–3,400 sq. ft.2 more rows
How long does it take for wet and forget to work?
In the very worst case scenario, where contamination is extreme, it may take 6-12 months to work.
Where is wet and forget used?
You sure can, Wet & Forget is used worldwide at some of the most recognized structures and theme parks. Additional commercial applications include Theme Parks, Airports, Local Governments, Cemeteries, Freeways, Gardens, Hospitals, Hotels, Landscapers, Marina's, Motels, Power Stations, Prisons, Retirement Communities, Schools, Stadiums, Shopping Malls, Sail Makers, and Zoos. For more information on commercial use, please contact us via e-mail at sales@wetandforget.com or by phone at 1-888-727-8524.
How long does it take for paint to decompose?
Leave the growth to start decomposing for 2-3 weeks (the longer, the better) before painting or staining, gently pressure wash the surface. Growth, dirt, and residue will come off faster and easier. The surface will also be sterile reducing possible contamination of the new paint with algae and fungi.
When is the best time to apply wet and forget?
Often the evening or early morning is the best time to apply; when evaporation is minimal. This way, the treated surface stays wet with Wet & Forget for an extended period.
Can you use Wet and Forget on pets?
Not under normal circumstances. However, after application, keep pets off the surface until it is dry to ensure they don't ingest any of the Wet & Forget. If they accidentally walk in the treated area while wet, rinse your pet's paws with fresh water as a precaution. Wet & Forget is safe for pets if it rains after the dry time.
Does wet and forget affect pH?
Wet & Forget is ideal to use around your pool. Any overspray will not affect the pH in your pool.
Is wet and forget bleach free?
Wet & Forget has an unlimited shelf life. It's bleach-free and non-acidic. Store Wet & Forget in the original bottle as a concentrate or as a dilution in your garden sprayer. The product will not deteriorate after being diluted nor damage your garden sprayer. Always keep the cap tightly fastened and the product out of the reach of children.
How to use Wet and Forget?
How do I apply Wet & Forget Outdoor? 1 Remove any debris (leaves, twigs, etc.) from your outdoor surface 2 Connect the Wet & Forget Hose End sprayer to your hose and attach the appropriate hose end tip for your cleaning job. (Jet Tip is best for high elevations. Fan Tip is ideal for large flat surfaces). Turn water spigot on. 3 Twist the dial to the ‘WATER’ setting and rinse down nearby landscaping. 4 Rotate the dial to the ‘ON’ setting and saturate the surface with the product 5 Next, turn the dial back to the ‘WATER’ setting and give your landscaping a quick rinse. 6 Turn the sprayer to the ‘OFF’ setting and your job is done! Mother Nature will do the rest of the work for you.
When to apply wet and forget?
In general, it’s best to apply Wet & Forget Outdoor Cleaner on a cool, cloudy or overcast day. It’s ideal to apply on a day below 80ºF, to limit product evaporation. Apply Wet & Forget to dry surfaces on a day when moist conditions (rain, heavy mist, etc.) aren’t in the forecast.
What is a wet and forget hose end?
Wet & Forget Hose End comes with a sprayer to attach to your hose to apply to large outdoor surfaces and high elevations. Follow the simple instructions below to apply Wet & Forget Hose End.
How to use a wet and forget hose end sprayer?
Connect the Wet & Forget Hose End sprayer to your hose and attach the appropriate hose end tip for your cleaning job. (Jet Tip is best for high elevations. Fan Tip is ideal for large flat surfaces). Turn water spigot on.
How long does wet and forget last?
Wet & Forget Outdoor will keep your exterior surfaces clean for up to 1-3 years in these areas. Southern states. In the humid South and along coastal areas, mold and mildew growth can reoccur faster. The residual effects of Wet & Forget lasts double as long as most conventional cleaners.
What weather conditions are best to apply Wet and Forget Outdoor?
What weather conditions are best to apply Wet & Forget Outdoor? Northern and Midwest climate s. In the northern and midwestern states, Wet & Forget Outdoor works not only with the rain, but also with the snow to remove unsightly, moss, mold, mildew and algae from outdoor surfaces.
Where to store Wet and Forget Outdoor Concentrate?
You can store any remaining Wet & Forget Outdoor Concentrate in your pump sprayer as the gentle formula won’t harm its working parts. To store Wet & Forget Hose End, make sure the dial is set to the “OFF” setting.
How do I apply Wet and Forget to a surface?
When applying Wet and Forget it’s important to get an even coating on your desired surface. Try and use a garden sprayer (or one of our Thrust One Sprayer models) to ensure you’re getting a good coating every time .
How much water should I add to Wet & Forget before application?
Generally, for most applications you want to get a good mix between water and Wet & Forget. A ratio of 5 parts water to 1 part Wet and Forget will usually suffice.
How much area does Wet & Forget cover?
Using a garden sprayer or one of our Thrust One Sprayers you will get coverage of between 100 - 300 square metres. Some surfaces e.g. painted surfaces will use less but porous surfaces readily absorb the product and therefore coverage could be in the range of 100-150sq m.
What outdoor surfaces can Wet & Forget be used on?
Wet & Forget can be used on an extensive range of outdoor surfaces including tarmac, concrete, decking, roof tiles, Astroturf, bowling greens, bricks and paving, canvas tents, caravan awnings, conservatories, fibreglass boats, greenhouses, golf greens, limestone, sandstone, marble, outdoor furniture, outdoor pots, outdoor painted surfaces, pool surrounds, shade sails, slate, tennis courts, yacht sails.
How soon after applying Wet & Forget can I start painting?
Thoroughly saturate the surface with Wet & Forget on a cool, dry day. Late in the day is best. Leave the growth to start decomposing for 2-3 weeks (the longer the better!) then prior to painting or staining, gently pressure wash the surface - growth, dirt and residue will come off faster and easier. The surface will also be sterile reducing possible contamination of the new paint with algae and fungi.
How long is Wet & Forget's shelf life?
Wet & Forget has an unlimited shelf life so it will last forever in its container! Natural light does not damage the efficiency of the product. For safety, always keep the cap on tightly and the container out of reach of children.
How often does Wet and Forget need to be applied to surfaces?
For most applications, using wet and forget once per year should suffice.
What is the pH of moss removal?
Most moss, mold and mildew removal products are either highly acidic (with a pH of roughly 1) or highly caustic (pH of around 12). Also, these products may be able to remove as much as you’d like them to remove, but they can easily damage the surface you’re trying to clean in the first place.
Is wet and forget good for moss?
It’s pretty well known that Wet & Forget is an amazingly effective moss, mold and mildew stain remover that requires very little work on your part. But what you may not know is just how gentle Wet & Forget is on the surfaces you apply it on.
Is wet and forget safe?
With a pH of 8, Wet & Forget is close to neutral. This means Wet & Forget is very gentle and safe to apply to any surface. It will remove moss, mold and mildew stains and leave your surfaces untouched.
