How do you cut holes in fabric for eyelet curtains?
- Turn down approx 1 cm at top of curtain, sew along the top of the tape to the top of the curtain, with plastic tabs facing you.
- This is easier if you use a piping/zipper foot.
- If you are lining your curtains with a separate lining, only take the lining to the bottom sewing line of the tape, below the eyelets.
How do you cut a curtain with eyelet tape?
Cut a length of eyelet tape to match the width of your curtain fabric. You can do this by measuring the eyelet tape to the same width of the curtain fabric, or by laying the tape out onto your cut-out curtain fabric to eyeball the width. Once you know how much eyelet tape you need, cut 1 piece for each curtain panel.
How do you fix a hole in a curtain?
Use your scissors or punching machines to cut out the holes which you previously marked. Each eyelet is made up of two parts. Place the larger outer circle beneath each hole and then snap the outer layer onto it from the top part so that they are fixed to the curtain’s fabric.
How do you hang eyelet Curtains Without a curtain ring?
Eyelet curtains are finished with large grommets that make them easy to install without any curtain rings. If you don’t have curtain rod brackets already, use wall anchors to secure them to your wall before hanging your curtains. Place 1 slightly to the left and above your window, and 1 slightly to the right and above the other side of your window.
How do you measure for eyelet curtains?
Measure from the top side of the curtain rod down to where you want the hem of your curtain panel to sit. The length depends on how long you want to make your eyelet curtains. Curtains can look nice in a number of lengths. Yours could fall just below the bottom of the windowsill or you could have them graze the floor.
How do you cut holes in eyelet fabric?
1:565:58How to Insert an Eyelet in Fabric - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut just the center section needs to be pushed through. So I'm using embroidery scissors justMoreBut just the center section needs to be pushed through. So I'm using embroidery scissors just because I feel like I get more of a precise cut but you can use regular scissors too.
How do I make curtain holes?
0:533:28How to Make Eyelet Curtains : Making/Modifying Curtains - YouTubeYouTubeStart of suggested clipEnd of suggested clipMaking sure that we end up with an even number if you put two large panels together you're going toMoreMaking sure that we end up with an even number if you put two large panels together you're going to want to cut three inches off of one side.
How do you punch an eyelet hole?
Insert the cone piece into 1 side of the pliers and the die piece into the opposite side.For example, if you're adding 1⁄4 in (0.64 cm) eyelets, then use the 1⁄4 in (0.64 cm) die and punch pieces.The punch and die will pop right into the holes in the pliers.More items...
How big are the holes in eyelet curtains?
The diameter of the inside of an eyelet ring (or grommet) is normally 40mm. The ideal diameter of a metal curtain pole for eyelets is 28mm. So if your pole is 28mm diameter or slightly smaller then it will be fine for your eyelet curtains.Jan 14, 2022
How much fabric do I need for eyelet curtains?
You need to allow for both flat panels to be a minimum of one and a half times the curtain pole width. I personally think they look much better at double the pole width. Give or take a couple of inches. This allows the curtains to have enough fabric to allow the pleats to look right when hanging over your window.
How do you fit eyelet curtains?
0:301:34How to Hang Eyelet Curtains - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe outermost eyelet goes outside the bracket. Between the bracket and finial this will stop yourMoreThe outermost eyelet goes outside the bracket. Between the bracket and finial this will stop your curtains from sliding all the way across your window.
How do you punch holes in fabric?
0:000:52Using a Fabric Hole Cutter for Grommets & Fasteners - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst pick out the right hole cutter according to the size grommets you have we're gonna use aMoreFirst pick out the right hole cutter according to the size grommets you have we're gonna use a number two spur grommet hole cutter here. And we're using a heavy mallet.
What tool is used to make eyelets in the fabric to be embroidered?
StilettoStiletto. It is the tool used in making eyelets. It is usually made of wood, bone or metal.
How do you attach eyelets to fabric without tools?
Add a layer of fusible interfacing to thin fabric before placing an eyelet in it. You may be able to set a small eyelet by placing the eyelet in fabric between the jaws of a handheld die punch. The back of the eyelet should rest against the die of the hole punch. Squeeze gently but firmly to fold it on itself.
Do eyelet curtains need rings?
Eyelet curtain poles offer an effortless way to draw your curtains to flood your home with natural light or close them for peace and privacy, since they don't rely on curtain rings or hooks to attach the curtain material to.
Can you use any pole for eyelet curtains?
In theory all poles can be used for eyelet curtains, however they do tend to glide more smoothly and are more popular on a metal curtain pole. You can purchase some curtain poles specifically for eyelet curtains and rings are not supplied.Oct 11, 2018
Do eyelet curtains need to be double width?
You need close to double your window width, but you don't need to limit yourself to one or two curtains.
Eyelet Search by Dimension | Eyelet Sizing Chart | Stimpson
Using the Stimpson Eyelet Search by Dimension, you can search our database for the eyelet that fits your needs. You can search by one, two, or all three of the dimensions (OD, FD, LUF).
How to draw circles on curtains?
It is best to draw circles by placing an eyelet on each spot. To ensure that the holes are evenly spaced, measure the width of the curtain and calculate how many rings you should fix so as to have the curtains hanging nicely. You need to make sure to make just the right amount of holes.
How to make curtains stiffer?
Step 1 - Sew Up Curtain Tape. While sewing your curtains, stitch curtain tape in between the outer drape and the lining drape at the top part of your curtains. The curtain tape will eventually be used to accommodate the eyelets and keep the material stiffer.
Why do curtains sag?
Too few holes will cause the curtains to sag as they will not be hung properly and they will appear rather unsightly. On the other hand, you do not need to make too many holes as they may appear too cluttered, and it will take a longer time and more effort for nothing.
Can you put a curtain ring in a hole?
Once the eyelets have been fixed in place you can insert a curtain ring into each hole. There are various types of curtain rings available. Some are simple rings whereas others come in more oval designs and sometimes are slightly engraved or patterned. It is best to choose curtain rings that match with the curtain rod, both in material and in color.
Can you put rings in a curtain rod?
Now you can slide the rings into the curtain rod so as to hang your curtains and enjoy your finished project. Although the whole process may take time and effort, the final result is more personalized and definitely much cheaper. Curtains/shades/blinds.
How to measure for eyelet curtains?
If you don't want to measure, a rod with a width between 1 3⁄8 to 1 1⁄2 inches (3.5 to 3.8 cm) will probably work for most eyelet curtains.
What is an eyelet curtain?
Eyelet curtains, also referred to as "grommet curtains," have holes along the top edge. These holes are finished with large grommets to prevent fraying and present a nicer finish. They are easy to install and do not require curtain rings.
How to measure for a window bracket?
Use a ruler to measure up and to the side of the window first. Next, place the bracket against the wall where you measured to. Place a level on top of the bracket to make sure that it is straight and not crooked. Where you measure to depends on where you want the bracket to hang.
Can you iron curtains from the front?
Iron the curtains from the front if they are creased. Read the washing instructions to find out what temperature setting you should use on the iron—or if you can iron the fabric in the first place. An alternative to ironing is steaming the curtains with a steamer.
Do you need to tie back curtains?
Eyelet curtains typically don't need to be tied back because of the way that they drape, but you can certainly install wall-mounted tie backs if you want to. Measure two-thirds down from the top of the window frame. Place the tie back bracket against the wall and mark the holes with a pencil.
How to sew eyelet tape on fabric?
Sew the top and bottom sides of the eyelet tape onto the fabric. Take the curtain panel to your sewing machine. Run a machine straight stitch along the top edge of the eyelet tape, backstitching at the start and end of your row of stitches. Then sew along the bottom edge of the eyelet tape in the same way.
How to make curtains for a window?
1. Start with your curtain rod mounted above the window. Choose and install your curtain rod before you think about cutting out any fabric. Once you have the positioning of your curtain rod set, you can reference the curtain rod and your window frame to help you decide how long and wide your curtains should be.
How to secure eyelet tape?
Insert pins through all of the layers of material to secure the top edge of the eyelet tape in place. Then smooth out the tape against the fabric and add insert pins along the bottom edge of the tape. Position the top of the eyelet so it’s 2 in (5.1 cm) below the folded edge.
How to measure for a curtain?
Measure from the curtain rod to where you want the bottom of the curtain to sit. Use a tape measure to determine how long you should make your curtains. Measure from the top side of the curtain rod down to where you want the hem of your curtain panel to sit.
How wide should a curtain panel be?
For just 1 panel, If you want each finished curtain panel to be 50 in (130 cm) wide, you’ll need a 58 in (150 cm) piece of fabric. 6. Draw out the length and width measurements onto your curtain fabric. Choose a non-stretch woven fabric for your curtains.
Why use eyelet tape?
Eyelet tape saves you from having to calculate the individual eyelet spacing yourself. It also provides a sturdy, reinforced facing for the eyelet rings. This is especially useful if you’re making lightweight curtains.
