how do you cut a glass jar with water and oil

1. Fill the glass jar with water, as high as you would like the cut to be.
2. Place the jar in a bowl and fill the bowl with water to the same height as what’s in the jar.
3. Add 20 bottle caps of oil to the water in the bowl.
4. Using the small blowtorch, heat the metal of your box cutter/razor. Use pliers to hold the razor.
5. Place the hot metal into the water outside of the jar and it will cut at the water line.

How do you cut a jar with oil and water?

To pull off this incredibly cool project, you’ll need a few tools: STEP 1: Fill the glass jar with water, as high as you would like the cut to be. STEP 2: Place the jar in a bowl and fill the bowl with water to the same height as what’s in the jar. STEP 3: Add 20 bottle caps of oil to the water in the bowl.

How to cut glass jars with a box cutter?

You Have to See This Cool Trick! 1 Fill the glass jar with water, as high as you would like the cut to be. 2 Place the jar in a bowl and fill the bowl with water to the same height as what’s in the jar. 3 Add 20 bottle caps of oil to the water in the bowl. 4 Using the small blowtorch, heat the metal of your box cutter/razor. ... More items...

How to cut glass bottles?

If you wish to cut towards the very bottom of the bottle, keep the bottle standing upright, rest your cutting hand on something that will elevate your hand and simply score the line whilst rotating the bottle at the same time. Step 4. Smooth the Edges of your Cut Glass Bottle

How to cut glass with hot&cold water?

How to Cut Glass using Hot & Cold Water 1. Take your bottle to the running cold water tap and whilst wearing your rubber glove on the hand you hold the bottle with, pour a small trickle of boiling water over the score line, rotating the bottle around as you do so. (you'll notice in the above image I was not wearing a rubber glove - very naughty.

How do you cut glass with oil?

1:153:02Use with Any Glass Cutter Tool for Glass Cutting - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe best way I found to fill it up is to fill it up from the bottom here. So doesn't spill out. AndMoreThe best way I found to fill it up is to fill it up from the bottom here. So doesn't spill out. And you might want to put a paper towel down or something.

How do you cut a glass jar without breaking it?

StepsScore the bottle. To create the line that the bottle will break off at, use a glass cutter or a glass drill bit to score a line. ... Heat the bottle. Heat the line that you made with the glass cutter. ... Dip the bottle in cold water. ... Repeat the process. ... Sand the edges. ... Enjoy your cleanly broken bottle.

Do you need cutting oil to cut glass?

Although not all glass cutters require oil in order to operate, it's important to use it whenever possible, to ensure blade longevity and a more accurate cut.

How can I cut a glass jar?

1:254:53How to Cut Glass Bottles | 3 ways to do it - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf. You want a better cut and you want to be able to just a point of fracture. You can use anMoreIf. You want a better cut and you want to be able to just a point of fracture. You can use an ordinary glass color and a duct tape or any other tape that fits your bottle push.

What is the easiest way to cut glass?

4:436:34How to Cut Glass - Quick, Easy, & Safe - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse a dowel rod. And what I do. Is. I Center that score mark I just made. Right on the center of theMoreUse a dowel rod. And what I do. Is. I Center that score mark I just made. Right on the center of the dowel rod. Okay that way it gives it a little support when we break it another.

How do you cut glass for beginners?

6:1010:03How to Cut Glass - Beginner Tips - YouTubeYouTubeStart of suggested clipEnd of suggested clipLine. And then it breaks this is a nice controlled way to break glass this is probably my favoriteMoreLine. And then it breaks this is a nice controlled way to break glass this is probably my favorite way of breaking. Um just because there's a lot more control than just breaking with your hands.

How do you cut glass at home?

0:383:34How To Cut Glass - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's going to take the straightedge and line it up with my marks. And then I take my cutter. And I'mMoreIt's going to take the straightedge and line it up with my marks. And then I take my cutter. And I'm going to push your hand a little bit and then I'm going to pull back one continuous smooth motion.

What lubricant do you use to cut glass?

Cutting oilCutting oil is the best lubricant. Use it to fill a self-lubricating cutter, dip your cutter into the oil, or apply the oil with a brush. (Figure 2) Remember to clean away the oil completely before firing the glass because any residue can cause devitrification.

What can I use instead of cutting oil?

WD-40 and 3-In-One Oil work well on various metals. The latter has a citronella odor; if the odor offends, mineral oil and general-purpose lubricating oils work about the same. Way oil (the oil made for machine tool ways) works as a cutting oil.

Can you cut glass with a knife?

Can you cut glass with a utility knife? Yes, you can use a utility knife to score glass so you can snap it along the cut and break it evenly. Use a straight edge or a ruler to guide your utility knife and score a straight line into the surface of the glass. You may need to make a few passes to cut deep enough.

How do you cut a glass jar in half?

0:303:40How To Cut A Wine Bottle In Half - Easiest Method - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt your back all the way up against it and push down with firm pressure. But you don't want to pushMoreIt your back all the way up against it and push down with firm pressure. But you don't want to push too hard because it could end up cracking your bottle.

How do you cut glass with string?

2:424:16How To Cut Glass Bottles With String - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe have our string here with acetone on it and we're just going to fit it back around the bottle.MoreWe have our string here with acetone on it and we're just going to fit it back around the bottle. Like. So you want to light it. In the end take our lighter and light it and spin spin spin.

How to cut glass bottles?

Place a strip of masking tape around the glass bottle where you wish to cut. This will act as your guide and ensure you have a neat circle that meets around the bottle. Make sure that where the ends of the masking tape meet up that you have a neat straight line, this will help ensure you don't have a jagged cut.

How to remove labels from glass bottles?

Some labels will peel off easier than others so lets go through the steps. 1. Submerge the bottle in a sink with hot water and leave for 10 minutes. With this method some labels will just peel off nice and easily.

How to make a Toyo glass bottle?

This helps to keep your hand steady and at a good angle. 2. With your Toyo glass cutter, score the glass bottle along the line of the masking tape all the way around the bottle.

What shape should I use for a glass bottle?

Any shape such as a triangle, flat or half round will work as well. For small glass drinking bottles or beer bottles I find a large file will file both sides at once because it's long enough. This is great because it means I get even sides and both sides get filed down at the same time. Handy!

Do you need oil for glass cutters?

There are many traditionalists who like to use oil with their glass cutters. With the advanced tungsten carbide wheels that are now used in glass cutters, oil is no longer necessary. The carbide cutting blade or wheel ensures you end up with a clean and neat cut and because tungsten carbide is so durable it won't dull easily.

Can you break a wine bottle?

Red or white wine bottles will differ in the thickness of the glass so you can never tell whether or not the bottle is going to be an easy one to break. Helpful Note: Remember you will never get a completely smooth break, you will always need to file down some sharp edges or snags with a diamond file.

How to cut glass bottles or jars

This particular glass-cutting process is a pretty simple one, but it’s important to take precautions. Glass can be temperamental and break at any time – even if you follow the instructions to a letter. Always wear gloves, goggles, and a respirator for protection.

a few last words on how to cut glass bottles

The process of cutting glass bottles is not as complicated as you may think. A simple 3-step process that can create beautiful, personalized gifts from recycled or used materials.

Subscribe To My FREE DIY Newsletter!

Stay in touch and receive things like updates, special offers, new projects, tips, gear reviews, and more. No spam, promise!

How to cut glass with a torch?

Article Summary X. If you want to cut a glass bottle with a flame, use a glass cutter or a glass drill bit to score a line around the bottle. Hold the bottle over a small candle or butane torch so the line you made is directly over the flame. Constantly rotate the bottle so you get even coverage.

How to make a bottle break off?

1. Score the bottle. To create the line that the bottle will break off at, use a glass cutter or a glass drill bit to score a line. If you want, you can use a support system so that you get a perfect line around the bottle, otherwise you can just freehand it. 2.

How to break a bottle of yarn?

At the location of where you would like the bottle to break, wrap a piece of yarn around the bottle 3-5 times. Tie the ends together and cut off any excess string. 2. Soak the yarn in acetone. Slide the yarn off the end of the bottle, and place it in a small dish or lid.

How to get rid of stress lines in a bottle?

5. Continue adding hot and cold water. Take the bottle from the cold water and add another pour of the boiling water over the stress line. Pour the water around the entire bottle, and then dip it in the cold water again.

Can you use a dremel wheel on glass?

You may have to go over the same section multiple times in order to get a clean cut. There should be a cautionary note here on using a Dremel wheel on glass because glass dust is very dangerous to our respiratory system. Use proper protective wear over nose and mouth, and eyes.

Claim

A video shows a glass jar being cut with nothing more than water, oil and heat.

Origin

On 28 March 2016, YouTube user Roman UrsuHack uploaded a video seemingly showing a glass jar being cut using nothing but water, oil, and heat: