Locate the flexible line between the two points you want to join. Use the pipe cutter to fit your pipeline properly. This material is very easy to cut, so it shouldn't pose any problems. When you get the right length, use the wrench to fit one of the ends of your flexible gas line first, and then tighten the channel lock.
How to cut into an existing gas line?
To cut into an existing gas line, you are going to need to make sure the gas is turned off. Then you will need to decide what kind of tool you will be using to cut the pipe. Most people use pipe cutting wrenches to get the job done, but if you are limited in space, then a metal blade reciprocating saw will do the job.
How do you tighten a stuck gas line?
Put the threaded cap on gas line. Tighten the cap with your fingers. Once it is tight enough to stay on, use the double-wrench technique to fully tighten the cap. Do not tighten the cap too much.
How to install a flexible gas line?
When you get the right length, use the wrench to fit one of the ends of your flexible gas line first, and then tighten the channel lock. Make it as tight as possible, so as to prevent any possible leaks. Perform the same procedure at every joint part.
How do you turn off the gas on a gas line?
Turning off the Gas Locate the gas meter. Find the main valve.On the gas meter, there are two pipes. Turn the valve off. Turn the gas line off.Make sure the gas line's valve is also turned to the off position.
How do you cut a flexible gas tubing?
0:252:16How To Cut CSST - YouTubeYouTubeStart of suggested clipEnd of suggested clipPlace the pipe into the cutter adjusting reel appropriately at your specified. Length. Begin toMorePlace the pipe into the cutter adjusting reel appropriately at your specified. Length. Begin to revolve the cutter around the tube rotations should be steady inconsistent.
Can I use a copper pipe cutter on CSST?
Yes, that's right. A standard tubing cutter can easily cut this tubing. There are at least two manufacturers ofCSST products, so you need to use the fittings supplied specifically for the tubing.
How do you install a flex gas line?
0:261:22How to Install HOME-FLEX CSST Flexible Gas Pipe - YouTubeYouTubeStart of suggested clipEnd of suggested clipAre easy to install. Simply. Cut the pipe along the values of the corrugation. With the home flexiMoreAre easy to install. Simply. Cut the pipe along the values of the corrugation. With the home flexi SST tubing cutter. Remove the sheathing with a blade. And slide on the nut.
Can you splice CSST pipe?
n) CSST shall not be spliced.
How do you shorten a natural gas hose?
0:526:39How to Shorten a Gas Pipe to Fit an Oven | Ask This Old House - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo here's the line. Here. Nothing goes here goes to the front you know by code every gas applianceMoreSo here's the line. Here. Nothing goes here goes to the front you know by code every gas appliance has to have a shut off right at the appliance.
How do I cut the gas pipe in my house?
Do not try to cut it at home. It is not designed to be. It should be cut with a mechanical cutter or a machine saw. It you must, use a hack-saw.
How long can I run flex gas line?
Three- or six-foot long and accessible: The flexible connectors can't go through walls, floors or ceilings, nor can they be concealed. The flexible connector length usually is limited to 3 feet except for gas ranges and clothes dryers. For these appliances, 6 feet generally is allowed.
What is the black flexible gas line?
Flexible gas lines are made from corrugated stainless-steel tubing (CSST). These extremely flexible pipes are made from stainless steel and often come coated in a trademark yellow casing, though they can sometimes be black.
Is Home flex gas line safe?
Is the pipe certified? HOME-FLEX CSST has been tested and certified by CSA and IAPMO for compliance with the industry standard ANSI LC-1 / CSA 6.26, “Fuel Gas Piping Systems using Corrugated Stainless Steel Tubing (CSST).”
What is the difference between black and yellow CSST?
The black conductive jacket of CounterStrike® has been shown to be up to 400 times more resistant to the damaging effects of electrical energy than yellow CSST. It also lays straighter and pulls easier than yellow CSST.
Can you connect 2 gas lines together?
Can I connect two gas connectors together to obtain the length I need? No, this could influence the gas flow rate, introduce new leak paths, and is expressly prohibited by the model codes.
Does flexible gas line need to be grounded?
FAC does not require bonding. This is because they are connected to a bonded (if properly installed) gas-distribution system. It is between 1–6 feet long. FAC are commonly found between the home's gas-supply lines and the gas equipment OR appliance.