Instructions for Covering a Foam Cushion With Fabric
- Measure and Cut the Fabric. Wrap a fabric tape measure around the perimeter of the form from one side all around the form and back to the starting point.
- Sew the Basic Cover. Fold the fabric, right sides together, aligning the width (W) edges. ...
- Complete a Knife-Edge Cushion Cover. ...
- Complete a Box-Edge Cushion Cover. ...
What do you need to know about foam board insulation?
Useful Tips
- Keep foam board insulation away from direct sunlight prior to installation; it will degrade its R-value.
- Cover the insulation with a vapor barrier before you install it; all foam boards absorb water vapor.
- When installing the foam, use caulk or tape for maximum insulation between the material and the board or floor.
Is foam insulation worth it?
Spray foam insulation is worth it because it can save you thousands of dollars in energy bills. The upfront cost of spray foam insulation is higher than blown-in, but spray foam is more effective. Spray foam insulation gets in every crevice behind your walls and fully insulates your home effectively.
Is foam board insulation fire rated?
What most people do not realize is that all foam plastics such as rigid foam board insulation should be covered with a fire rated / thermal material such as 1/2 inch gypsum board. In addition, some contain harmful toxins (and or are not thought to be a “green” building product) that can be released into the air.
What is the are value of 1 foam board?
The graphite in these foam boards reflects radiant heat, complementing the foam air bubbles’ ability to block conductive heat. This unique function gives them a relatively high initial R-value of 4.7 per inch. GPS’ special feature is its R-value’s longevity.
How do you cover Styrofoam with fabric?
0:082:17How to Make Fabric-Covered Styrofoam Balls With Fabric StripsYouTubeStart of suggested clipEnd of suggested clipToday i'm going to show you how to make fabric covered styrofoam balls with fabric strips. I have aMoreToday i'm going to show you how to make fabric covered styrofoam balls with fabric strips. I have a styrofoam ball here which i've begun to cover with strips such as these using a hot glue gun.
Can you staple fabric to foam board?
Lay your ironed fabric flat and place the foam covered board, foam side down, in the center. When your fabric is straight, take one side, wrap it over and pull taut. Staple that side to the board, pulling it taut as you go.
How do you wrap foam board?
1:358:11Covering foam board with Vinyl video. - YouTubeYouTubeStart of suggested clipEnd of suggested clipI put one piece of tape upside. Down. So that does not glue to the table that sticks to the vinyl sMoreI put one piece of tape upside. Down. So that does not glue to the table that sticks to the vinyl s the first piece and then I put another piece on top of that that is not on the vinyl.
How do you decorate foam board?
10:2817:48LOOK what I do with this Dollar Tree Foam Board | SUPER CUTE DIY for ...YouTubeStart of suggested clipEnd of suggested clipPiece they used a little blocks in the back. That's why I cut out little squares out of my foamMorePiece they used a little blocks in the back. That's why I cut out little squares out of my foam board and I actually doubled them up with the hot glue.
How do you attach fabric to foam?
3:455:43How to Finish Foam with Fabric for Cosplay! - YouTubeYouTubeStart of suggested clipEnd of suggested clipHot glue glue glue. Hot gluing.MoreHot glue glue glue. Hot gluing.
How do you cover foam fabric without sewing?
2:259:23EASY | NO SEW Upholstery Cushion - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd pulled it firmly but evenly towards the center of the panel. This process is actually a littleMoreAnd pulled it firmly but evenly towards the center of the panel. This process is actually a little easier when you're using a thicker material like vinyl or leather. Using a heavy duty stapler.
What can I use to cover foam board?
There is no perfect material for covering and protecting exterior foam on foundations. Use metal or plastic reinforcing to strengthen the cement parging on foundation foam boards. The most common approach is to apply a stucco-like “parged” finish with a surface-bonding cement.
Can you glue fabric to styrofoam?
Many products are available to glue fabric to Styrofoam. Use low-temperature hot melt glue sticks, Tacky Glue, 3M's 77, 3M's Spray Styrofoam Glue or Aileen's Foam glue for this purpose.
Can you sew through foam board?
Craft foam is quite easy to pierce with a needle for hand sewing, but be sure to space your stitches close together and use a regular cloth thread rather than thick cord; this way, the stitches will be less likely to tear through the foam. With thin sheets of leather, you can also machine-sew.
How do you color foam board?
12:1114:38Quick Tutorial on Coloring Dollar Tree Foam Board - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo there you can see that you can watercolor on top of foamboard. So that was that one I'm going toMoreSo there you can see that you can watercolor on top of foamboard. So that was that one I'm going to put that just over there for a second and move that out of the way. And now we're going to use. Way.Quick Tutorial on Coloring Dollar Tree Foam Board - YouTubehttps://www.youtube.com › watchhttps://www.youtube.com › watchSearch for: How do you color foam board?
How do you cover styrofoam walls?
1:202:48DIY Insulation Project: Basement Walls Rigid Foam - YouTubeYouTubeStart of suggested clipEnd of suggested clipPosition the board's vertically. Using a level to ensure they are plumb against the wall. Notice howMorePosition the board's vertically. Using a level to ensure they are plumb against the wall. Notice how the notched edges fit together to create an insulated channel with no energy robbing air gaps.DIY Insulation Project: Basement Walls Rigid Foam - YouTubehttps://www.youtube.com › watchhttps://www.youtube.com › watchSearch for: How do you cover styrofoam walls?
How do you seal the edges of foam board?
2:403:47How to seal the edges of foam board with hot glue. - YouTubeYouTubeStart of suggested clipEnd of suggested clipThat's already been cleaned off I'm going to show you how we do this with my hot glue gun on high IMoreThat's already been cleaned off I'm going to show you how we do this with my hot glue gun on high I went to carefully and somewhat quickly move my bead of glue down the wall.How to seal the edges of foam board with hot glue. - YouTubehttps://www.youtube.com › watchhttps://www.youtube.com › watchSearch for: How do you seal the edges of foam board?
How to measure foam for a form?
Wrap a fabric tape measure around the perimeter of the form from one side all around the form and back to the starting point. Divide this measurement in half and record it as the width. Wrap a fabric tape measure around the foam perimeter from the front to the back and all around to the front starting point, and record this measurement as the total length.
How to make a box edge cushion cover?
The excess fabric at each corner will be stitched to create depth and a form cover that mimics the shape of the foam. Pinch this excess fabric together creating a triangle, the apex of which is pointing away from the cushion. Pin through the layers of fabric, close and parallel to the corner edge of the foam, along the base of the triangle. This is the stitching line that will create the boxed shape. Pin all four corners. Remove the closing pins and remove the foam from the cover. Sew the corners, following the line of pins, removing them as necessary. Do not sew over the pins. Trim the excess triangle fabric to one-half inch from the seam. Turn the cushion right-side out and insert the foam into the cover. Hand-stitch the opening closed to complete a box-edge cushion cover.
How to make a cushion cover with triangle fabric?
Pin all four corners. Remove the closing pins and remove the foam from the cover. Sew the corners, following the line of pins, removing them as necessary. Do not sew over the pins. Trim the excess triangle fabric to one-half inch from the seam. Turn the cushion right-side out and insert the foam into the cover.
What is a foam cushion?
Foam cushions are typically one of two shapes. One is a knife-edge cushion frequently found in the collection of cushions along the back of a sofa. The edges are graded down to a minimum from the center, thickest part of the form--hence “knife-edge.”.
How to sew a sleeveless hat?
Fold the fabric, right sides together, aligning the width (W) edges. Sew the length (L) edges together from the fold to the width edge. Sew with a one-half-inch seam allowance. Sew the width edges together, leaving an opening in the seam equal to three-quarters the width of the foam.
What to cover foam board with?
Once the sheet rock is installed over the foam board insulation it can be finished with paneling, wall paper, or paint to finish your projects. Insulation.
What is foam board insulation?
Foam board insulation comes in handy when remodeling a home. The foam is compressed into a stiff board that has many building uses. It can be used to insulate shower walls and during replacement of sheet rock or paneling. There are a variety of options on how to cover foam board insulation.
Can foam board be used behind a shower?
Bathroom Uses. When renovating a bathroom foam board insulation can be installed behind the shower or bath walls. Once the foam board is in place it can be covered with waterproof concrete board or specially treated sheet rock.
What knife to use to cut foam?
Cutting a piece of thick foam can be a challenge. Scissors or a craft knife often can leave you with an uneven edge. An electric knife will get you the best results.
How to sew a cushion with a half seam?
Place the seam of the side sections at the half mark. Match the edges, and pin the side section to the top section of the cushion. Sew the sections together using a 1/2-inch seam allowance, pivoting at the corners. Apply a seam finish. Place each end of the front section even with one end of a side section.
How to make a cushion with a back?
Place each end of the front section even with one end of a side section. Join the ends right sides together, using a 1/2-inch seam allowance. Repeat to add the back section to the other ends of the side sections. Match the seams to the corners of the top section of the cushion.
How big is a side piece of fabric?
The top and bottom pieces of fabric are 12 inches by 65 inches. The side piece is 5 inches by 151 inches. Another option for the sides (shown in the diagram below) is to use two pieces that are 12 inches by 5 inches for the short sides and two pieces that are 65 inches by 5 inches for the long sides.
How to cut foam cushion edges?
To cut a shaped edge on a foam cushion, or to cut foam to size, trace a pattern line directly onto the foam with a marker and hold an electric knife perpendicular to the foam, guiding it along the marked line for a smooth edge. Scissors compress the foam, leaving a jagged, uneven cut.
How to clip a strip at the corner?
To clip the strip at the corner, make a small snip -- in the seam allowance only -- from the edge of the strip almost to the seamline, being careful not to cut into the stitching. Snip the seam allowance of the strip only, not the large fabric piece. This opens the seam allowance so the corner doesn’t pucker.
