how do you clean the carburetor on a featherlite weedeater

You also have to clean it with soap and water. Now, detach the carburetor

. Pull the fuel lines that connect the carburetor to the engine of the weed eater.

Full Answer

How to clean a carburetor on a weed eater?

It will also be a good idea to soak a carburetor in water with mild soap. This will allow stubborn dirt to become softer, making it easier to be removed. Once you are done, dry the carburetor and assemble back in place. Pay attention to proper assembly to prevent the weed eater from malfunctioning.

How to use a Featherlite Weedeater?

A weedeater can be a handy device for any lawn enthusiast or professional gardener. A convenient way to trim the grass that grows in these areas is to use a Featherlite weedeater. Remove the fuel filter from the weedeater and clean the filter by running it under water. Let the filter dry for six hours in the sun and replace it in the weedeater.

How do you clean the fuel filter on a John Deere Weedeater?

Remove the fuel filter from the weedeater and clean the filter by running it under water. Let the filter dry for six hours in the sun and replace it in the weedeater. You don’t need a tool to remove or replace the filter.

What are the necessary tools for the Weedeater carburetor adjustment?

Necessary Tools for The Weedeater Carburetor Adjustment 1 A Clean Workspace 2 A weedeater with sufficient gasoline 3 Screwdriver (Phillips-head)

Why is my Weedeater not getting the gas?

0:0915:16Weedeater 101 - The two most common reasons for failure to start.YouTubeStart of suggested clipEnd of suggested clipIf all of a sudden your weed eater does not start a couple of things you want to check are theMoreIf all of a sudden your weed eater does not start a couple of things you want to check are the following one is diaphragm. And your carburetor. - I'll explain these two are the hoses in your gas.

Why does my Weedeater stall?

0:042:00Top Reasons String Trimmer Starting, Then Stalling - YouTubeYouTubeStart of suggested clipEnd of suggested clipOver time the arrestor can become clogged with soot which may cause the trimmer engine to stall. YouMoreOver time the arrestor can become clogged with soot which may cause the trimmer engine to stall. You can try cleaning the arrestor with a wire brush. But you may need to replace it with a new.

How do you clean the carburetor on a grass trimmer?

3:209:03How to Clean a Two-Cycle/Two-Stroke Engine ...YouTubeStart of suggested clipEnd of suggested clipI can actually stick the tube. On my carburetor cleaner in there and when I spray you can see itMoreI can actually stick the tube. On my carburetor cleaner in there and when I spray you can see it comes out that orifice on the carburetor. And that's a good way to clean those out.

How do you rebuild a carburetor on a Weedeater?

0:005:50Weedeater Carburetor Rebuild & Fuel Line Repair Part 1 of 3 - YouTubeYouTubeStart of suggested clipEnd of suggested clipIn my next videos I'll be showing you how to remove the carburetor clean it and rebuild it in theMoreIn my next videos I'll be showing you how to remove the carburetor clean it and rebuild it in the weed eater grass trimmer first of all you got to remove these two allen screws here.

Why does my trimmer dies when I give it gas?

Why does my weed eater die when giving it gas? The most common causes of a weed eater dying when throttled are fuel issues, insufficient air intake, or problems with the exhaust. You should follow the path that the fuel travels to identify the issue.

Why won't my Weedeater keep running?

When your weed trimmer will not stay running, run through the basic troubleshooting steps to get it working again. The machine may have run out of gas, which is easy to fix, but the problem may also be a maladjusted carburetor, which is also fairly easy to fix. It's also a good idea to clean or replace the air filter.

How do you clean a carburetor without removing it?

A good way to clean the fuel tank is to start the engine and use a garden hose with a spray attachment to blow the oil out of the tank. Do this until there's no more oil in the tank. Then, while the engine is running, pour some brake cleaner into the tank and use a rag to wipe the bottom.

What are the symptoms of a dirty carburetor?

4 Signs Your Carburetor Needs CleaningIt just won't start. If your engine turns over or cranks, but doesn't start, it could be due to a dirty carburetor. ... It's running lean. An engine “runs lean” when the balance of fuel and air gets thrown off. ... It's running rich. ... It's flooded.

How do you clean a 2 cycle carburetor without removing it?

Vacuum away any loose dirt, dust, debris, grime, and great on the surface with a handheld and cordless vacuum. Lay out rags or cloths at the base of the carburetor to catch runoffs and protect the surfaces. Apply the carburetor and choke cleaner in thin, even coats. Then, wait for it to settle and work its magic.

How do you fix a 2 cycle carburetor?

0:1110:30How to Fix a 2-Cycle Engine Carburetor - YouTubeYouTubeStart of suggested clipEnd of suggested clipThey're often two types of kits available a complete rebuild kit or a gasket and diaphragm kit theMoreThey're often two types of kits available a complete rebuild kit or a gasket and diaphragm kit the gasket and diaphragm kit simply includes the two diaphragms.

How do you rebuild a carburetor?

3:3730:54Carburetor Rebuild Basics (Part 1) -EricTheCarGuy - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse line wrenches whenever removing lines that are like this to avoid stripping. Things.MoreUse line wrenches whenever removing lines that are like this to avoid stripping. Things.

How do you service a Walbro carburetor?

16:5121:18Walbro Carburetor Service - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe fuel pump side of the carburetor body also contains the main jet and its own ring. Once theMoreThe fuel pump side of the carburetor body also contains the main jet and its own ring. Once the carburetor is completely disassembled clean its metal components using mineral spirits.

Step 1: Tools

Alright, this list is very hard to remember. You might want to press that share button and email this list to yourself.

Step 2: Special Repair Knowledge

This repair requires knowledge, just like any repair. Unlike most small engine repairs, this one requires a special knowledge. Ready to see if you got what it take? Let me have a questionnaire. If you answer yes to any of these questions, you qualify to be smart enough to do this repair.

Step 5: Unclog the Filter

This is the most important step because this is the only reason why we opened the carburetor.

Step 6: Put the Carburetor Back Together

All you have to do with this step is repeat the previous steps backwards. Does that make sense??? If it doesn't you might as well pack up the pieces in a box and take it to a small engine repair shop to give them a $100 dollar bill.... Or you could just watch the video on the next step.

How to clean carburetor on weed wacker?

To clean the carburetor of your weed wacker, below are the simple steps that you need to follow: Take off the breather shield or the protective plate that covers the engine of the weed eater. You need to unscrew it and keep it in a safe place, making sure that the screws will not get lost as you have to put them back later on.

How to clean a carburetor?

Drain any liquid that is in the carburetor. Using a pipe cleaner, remove the dirt and grime that you can see in the carburetor. Unscrew the remaining parts of the carburetor to make sure that you will be able to perform thorough cleaning. To be specific, you need to remove the plate that attaches the primer bulb to the primer base.

What happens if a weed eater doesn't start?

The carburetor is one of the essential parts of the engine of the weed eater. If the equipment won’t start, one of the common problems is the carburetor. There are two possible issues with the latter. First, there might be cracks and gaps. In this case, you need to have a replacement.

How to make the most out of weed eater?

To make the most out of your weed eater, one of the important things is to make sure that you pay attention to its thorough care and maintenance. Similar to the case of other garden tools, you need to be proactive in keeping the unit in its tip-top shape to prevent costly repairs and to make the most out of the equipment. ...

Is it easy to clean a weed eater carburetor?

At first, you might think that it is a difficult task. Once you are aware of the basics, however, you will realize that it is indeed easy. A little patience and effort to spare will go a long way in making sure that your weed eater will work just fine.

Do you need to replace a weed eater carburetor?

With the steps above, we hope that you are now aware of how to clean a weed eater carburetor. In most cases, you do not need to replace the carburetor, especially if the weed whacker is a new one. It can easily become dirty, especially with frequent use.

How to clean weedeater fuel filter?

Remove the fuel filter from the weedeater and clean the filter by running it under water. Let the filter dry for six hours in the sun and replace it in the weedeater. You don’t need a tool to remove or replace the filter. If the engine still doesn’t start, see Step 3.

How to stop weedeater from starting?

Open the gasoline tank gas cap by turning it to the left until it detaches from the weedeater. Fill the tank to the fill line. Low gas levels can prevent the engine from starting. If the engine still doesn’t start, see Step 2.

How to reattach a weedeater spool?

Reattach the spool by placing it on the weedeater and turning the screw to the right. Use a screwdriver to accomplish this task.

What is a weedeater?

A weedeater can be a handy device for any lawn enthusiast or professional gardener. When mowing or maintaining a yard or large grassy area, you will encounter hard-to-mow places such as the edges of landscaping, the borders of sidewalks and driveways, and odd shaped yard corners.