Receiving Helpdesk

how do you check the oil on a mercury 2 stroke outboard

by Prof. Lincoln Herzog Published 3 years ago Updated 3 years ago

Mercury 2-stroke oil change and inspection is the first step to 100-hour service. On a Mercury outboard with oil injection, start at the tank inside the boat. For premix models, this step will not necessarily apply. Using a flashlight, inspect the tank for any signs of contamination or water intrusion.

Part of a video titled How to Check the Oil on an Outboard - YouTube
0:30
1:17
Turn it off tilt the engine about half way up and that allows the oil to drain back down into theMoreTurn it off tilt the engine about half way up and that allows the oil to drain back down into the crankcase. Level the engine out and then check your oil.

Full Answer

What kind of fluid do you put in a Mercury outboard?

Use genuine Mercury Power Trim & Steering Fluid. It’s natural for the outboard to need a little fluid from time to time, but if it consistently needs a fair bit of fluid – or if there are visible signs of a leak – contact your Mercury Authorized Dealer to get it checked out. play video Back to Dockline

What should I do if my two-stroke engine is leaking oil?

If you do locate contamination in the oil tank, use a vacuum extractor to pull the remaining oil out of the tank for proper disposal. While good quality two-stroke oil is certainly expensive, running contaminated oil can lead to catastrophic failure.

How do you perform a 100-hour service on a Mercury outboard?

Mercury 2-stroke oil change and inspection is the first step to 100-hour service. On a Mercury outboard with oil injection, start at the tank inside the boat. For premix models, this step will not necessarily apply. Using a flashlight, inspect the tank for any signs of contamination or water intrusion.

Why should I Check my outboard motor power trim fluid?

Checking your outboard motor power trim fluid is an important maintenance step to keeping your engine in peak condition. How-To One of the key factors in being a successful do-it-yourselfer of any kind is knowing what you can handle and what’s best left to a professional.

How do you check the oil on a Mercury outboard motor?

0:091:40Mercury Verado Maintenance: How to Check Engine Oil - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce we tilt the engine back down we want to make sure that it's in a level position to get a goodMoreOnce we tilt the engine back down we want to make sure that it's in a level position to get a good accurate. Reading remove the engine oil dipstick. And wipe it clean with a rag.

How do you add oil to a 2-stroke Mercury outboard?

1:176:48How 2-Stroke OIL SYSTEMS Work! - YouTubeYouTubeStart of suggested clipEnd of suggested clipSystem we can just unscrew the cap on the main oil tank. And watch the oil level rise. Then quicklyMoreSystem we can just unscrew the cap on the main oil tank. And watch the oil level rise. Then quickly tighten the cap back down before oil flows out and all over the place. Both of these oiling.

Does a Mercury 2-stroke have engine oil?

Mercury® Premium Plus 2-Stroke Synthetic Blend Marine Engine Oil brings a specially formulated design with a marine additive package to meet the needs of low- to mid-horsepower outboard engines.

How do you add oil to a 2-stroke outboard motor?

Use a 40:1 two-cycle oil mix ratio. One gallon of gasoline combined with 3.2 oz of two-cycle engine oil. Unsure of the age of your equipment? Use the 40:1 mixture.

How do I check the oil level in my boat?

0:121:17Outboard Expert: How to Check the Oil on an Outboard - YouTubeYouTubeStart of suggested clipEnd of suggested clipTurn it off tilt the engine about half way up and that allows the oil to drain back down into theMoreTurn it off tilt the engine about half way up and that allows the oil to drain back down into the crankcase. Level the engine out and then check your oil.

What happens if you put too much oil in a 2 stroke outboard?

Excess oil can produce a smoky exhaust, oil leaking out of the muffler, and sometimes loss of power. While not ideal, these issues can be fixed by simply replacing the fuel in the tank with properly mixed fuel. But running a two-cycle engine with too little oil can actually destroy the unit.

Do 2-stroke outboards need oil changes?

Being two-stroke engines, they have no crankcase oil to change, and have fewer moving parts than four-strokes; that means fewer parts that need maintenance, and fewer parts to fail.

Does a 2-stroke outboard have an oil filter?

You should notice a small, white, inline filter that strains the two-stroke oil in route to the engine. This small filter is often overlooked, but without a steady supply of Yamalube two-stroke oil, your engine will quickly go into reduction mode, or worse.

What kind of oil does a 2-stroke Mercury outboard take?

Mercury Premium Plus Synthetic Blend 2-Cycle Outboard Oil is specifically formulated with a higher concentration marine additive package to meet the needs of High-horsepower outboard including direct fuel-injected engines in extreme marine operating conditions.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9