How do you change the line on a DR trimmer?
- Prepare the line.
- Make sure your trimmer's engine is turned off.
- Remove the retaining cap from the trimmer head.
- Locate the starter hole in the spool.
- Line up the retainer with the slot on the outside of the head.
How do you change the line on a single line trimmer?
Changing the Line on a Single-Line Trimmer Prepare the line. Make sure your trimmer’s engine is turned off. Remove the retaining cap from the trimmer head. Locate the starter hole in the spool. Line up the retainer with the slot on the outside of the head.
How do I replace the line plates on my Dr Trimmer mower?
If you need to replace your line plates or Mow-Ball, the first step is removing the cutter head assembly on your DR Trimmer Mower. It is also the first step for installing the DuraBlades and Beaver Blade attachments. DR tech expert Jamie explains the process step-by-step in this video: Want to learn more about DR Trimmer Mowers?
How do you sharpen a trimmer line?
Insert the tip of the trimmer line, and wind in the direction of the arrows. Wrap the line in neat, straight rows, to prevent jams later on. When there are about 5” or 6” of line remaining, snap it into the retainer on the spool to hold it in place. ...
How to string a Dr Trimmer mower?
How to String a DR Trimmer Mower. 1 Step 1. Cut two pieces of string to 23-inch lengths with a utility knife. You can use DR blue 175-mm string for thicker weed or DR green 155-mm string ... 2 Step 2. 3 Step 3. 4 Step 4. 5 Step 5. More items
What size string does a DR trimmer use?
We have developed three types of DR Cutting Cord: Orange: 130 mil cutting cord for your lightest cutting tasks. Green: 155 mil cutting cord for tougher, stalkier weeds. Blue: 175 mil cutting cord for really tough trimming such as brambles, cattails, and swale grass.
How do you take the trim off of a DR trimmer?
1:443:24How to remove the DR Trimmer Cutting Head Assembly - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can then grab ahold of the MOE ball the very bottom unit and twist it counterclockwise. And justMoreYou can then grab ahold of the MOE ball the very bottom unit and twist it counterclockwise. And just keep spinning it you'll want to hang on to the line plate. So they don't fall. Off.
How do you string a brush hog?
2:016:08How To Install String on a DR Trimmer Mower - YouTubeYouTubeStart of suggested clipEnd of suggested clipStill take one in one of the ends put them on the outer. Loops. Like that just try to pull. And thenMoreStill take one in one of the ends put them on the outer. Loops. Like that just try to pull. And then don't pull all the way. Back. Kind of leave the end like this just.
How do you refill a line spool trimmer?
1:384:51How to Refill Trimmer Line : Lawn Care & Power Tools - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you'd pull out about 20 feet of line I'm going to use a shorter piece and cut it to length. ThenMoreSo you'd pull out about 20 feet of line I'm going to use a shorter piece and cut it to length. Then you insert the line through the hole in the spool. And even up both lengths of line.
What does Dr Trimmer stand for?
“DR” stands for Dick Raymond, one of the founders of DR Power Equipment.
How do you put Beaver blades on DR trimmer?
3:164:34How to install the Trimmer Brake Kit for the Beaver Blade - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst install the spacer on a shaft then install the anti-rattle. On a shaft insert the screwdriverMoreFirst install the spacer on a shaft then install the anti-rattle. On a shaft insert the screwdriver through the anti wrapped canister into the internal housing. Now take the big spacer.
How do you use a wheeled string trimmer?
0:283:36Southland Wheeled String Trimmer - Tips and Tricks - YouTubeYouTubeStart of suggested clipEnd of suggested clipKeep the objects to the right of the wheel string trimmer this will keep you safe and clean whileMoreKeep the objects to the right of the wheel string trimmer this will keep you safe and clean while trimming tip 3 use the swivel. Function along fences and buildings when trimming along fences.Southland Wheeled String Trimmer - Tips and Tricks - YouTubehttps://www.youtube.com › watchhttps://www.youtube.com › watch
How do you wind a grass trimmer spool?
5:506:29How to Wind a Trimmer Head - YouTubeYouTubeStart of suggested clipEnd of suggested clipNote the winding direction arrows on the top of the spool. Turn the spool in this direction. And youMoreNote the winding direction arrows on the top of the spool. Turn the spool in this direction. And you will automatically wind the line onto the spool.How to Wind a Trimmer Head - YouTubehttps://www.youtube.com › watchhttps://www.youtube.com › watch
How do I change the cutting line on a Honda Accord?
1. Stop the engine, wait 5 minutes for parts to cool down, disconnect the spark plug wire on the engine and move it well away from the plug. Clean away any grass, weeds, or other debris from the cutting line holder at the front of the trimmer, and pull out any old cutting line with the pliers. Unroll the new cutting line from its spool ...
How to make a loop on a cutting line?
Push the line into the holes until the ends emerge from the center hole. Pull the line so the ends are even, then pull the line ends out. As you pull, the line will form a loop above the cutting line plate. Push the loop into the notches above the smaller line plate holes. Continue to pull on the line ends until the loop hooks onto ...
What is a DR mower?
The DR Trimmer/Mower is a walk-behind weed whacker and mower for cutting tall weeds, and very thick and heavy grass. This machine cuts with a flexible cutting line instead of a rigid blade, so it can trim around or over obstacles without danger of breaking the cutter.
How to make a trimmer line even?
Thread the end of the trimmer line through one eyelet. It should come through the eyelet on the other side of the trimmer head. Hold the ends together and pull to make both sides even. Twist the head clockwise until 5” or 6” of line are exposed.
How long should a trimmer line be?
If you are not sure what size line your trimmer uses, check online—the manufacturer’s website often has instructions, and if not the customer service department should be able to help you.The length to which the line should be cut also varies, from around 10’ to 25’.
How to keep trimmer line from jamming?
Locate the starter hole in the spool . Insert the tip of the trimmer line, and wind in the direction of the arrows. Wrap the line in neat, straight rows, to prevent jams later on. When there are about 5” or 6” of line remaining, snap it into the retainer on the spool to hold it in place.
How many halves does a double line trimmer have?
Double-line trimmers typically divide the spool into two halves (one fore each protruding line).
What happens if you buy the wrong width of line?
The length and width of line you need varies based on your trimmer. If you purchase the wrong width of line, the trimmer will not work correctly, so don’t waste your money by simply guessing at the hardware store.
Do lawn trimmers need string?
Even the best lawn trimmers will eventually need new string. Doing this kind of maintenance can be intimidating for some people, but replacing the string on a trimmer is not difficult. With a little help, it won’t be long before you’re out trimming your lawn once more. Steps.
What is a DR mower?
Utility knife. The DR trimmer mower is like a weed trimmer on major steroids. It resembles a push mower except the front has a very large cutter head just like a hand-held weed trimmer. The DR trimmer mower is useful for those who have large yards that require a lot of weekly trimming or for those who cannot hold a hand-held trimmer ...
Can you put more than two strings on a trimmer?
Do not install more than two strings. It does not improve the cutting ability of the trimmer. It will, however, cause the motor to lag because it is not designed to handle additional strings.
