How do you change the head on a Stihl fs55r?
- Place the Stihl FS 55 trimmer on a level surface.
- Hold the body of the trimmer head with one hand.
- Press down on the spool and rotate slightly to the left then pull it straight off the trimmer head.
How to replace the line on a Stihl FS 55 Trimmer?
How to Replace the Line on a Stihl FS 55. Place the Stihl FS 55 trimmer on a level surface. Allow the trimmer to cool if it has been operated. Remove the spark plug wire from the spark plug. Hold the body of the trimmer head with one hand. Rotate the head to locate one of the two tab connection ...
How to change the trimmer head on a Stihl Trimmer?
How to Change the Trimmer Head on a Stihl Trimmer. Pull off the spark plug boot before working on the cutting head to prevent the trimmer from starting accidentally, causing injury. The spark plug ... Place the supplied pin or screwdriver into the hole on the left at the back of the gear head. This ...
How do you change the head on a Husqvarna riding mower?
Screw the nut onto the shaft counterclockwise, using the supplied wrench. Tighten the nut to secure the trimmer head. Remove the pin from the output shaft. Replace the spark plug boot. Consult the instructions that are supplied with the new mowing head if you are changing to a different head.
How do I replace the output shaft of the gear head?
Place the supplied pin or screwdriver into the hole on the left at the back of the gear head. This hole is the output shaft. Push the pin in as far as it will go to block the shaft.
How do you remove a Stihl FS 45 head?
0:152:46VTECH 2 - How to replace Stihl FS38 and FS45 Trimmer Head - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you can see there's a bump knob on the front. So to remove this you just turn the bump knobMoreSo you can see there's a bump knob on the front. So to remove this you just turn the bump knob counterclockwise. So just spin it just hold the hold ahead while spinning the thumb.
How do you remove a Stihl FSA 57 head?
0:031:06How To Change The Mowing Head On An FSA 57 Grass TrimmerYouTubeStart of suggested clipEnd of suggested clipIt's possible to replace the auto cut 3-2 mowing head with the poly cut 3-2 mowing head so that youMoreIt's possible to replace the auto cut 3-2 mowing head with the poly cut 3-2 mowing head so that you can use polymer blades instead of nylon mowing. Line. It's quick and easy to swap. Them.
How do you load a Stihl trimmer head?
5:476:29How to wind a Stihl trimmer head - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst make sure that the arrows and the spool housing. And the spool are aligned then firmly insertMoreFirst make sure that the arrows and the spool housing. And the spool are aligned then firmly insert the end of the line into the outlet hole as far as you can approximately two inches repeat.
How do you take the cap off a Stihl weedeater?
STIHL Autocut Head Removal The Autocut model has a tapping cover that is secured in place by tabs on either side of the head. Press on each tab firmly, pushing the tab inward and then up toward the trimmer head to disengage the cover from the trimmer head.
How do you take the head off a FSA 56?
Ensure the FSA 56 unit is powered off and that the battery is removed. On the mowing head, depress the two tabs on the side to release the cap. Remove the old spool from the mowing head. Clean any grass, dirt or debris out of the mowing head.
How do you remove a Stihl Polycut 7 3 head?
0:301:55How To Replace The Plastic Blades on a PolyCut 7-3 Mowing HeadYouTubeStart of suggested clipEnd of suggested clipIf you're replacing them just place the new ones on here like. This. Place the black part on top toMoreIf you're replacing them just place the new ones on here like. This. Place the black part on top to hold everything in place.
How do you change a head on a trimmer?
0:001:46Trimmer Head Replacement - Universal Trimmer Head - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis I went to the hardware store and I get a replacement kit for the head and I'm going to show youMoreThis I went to the hardware store and I get a replacement kit for the head and I'm going to show you the steps to change this out all right for this model. We need to remove. The old head.
How does the Stihl AutoCut head work?
The AutoCut mowing head has a line storage device and the line is fed while the machine is running. This is done by tapping the top of the mowing head on the ground. This opens the holding mechanism for the line and centrifugal force causes line to be fed out.
How do you wind a strimmer head?
5:506:29How to Wind a Trimmer Head - YouTubeYouTubeStart of suggested clipEnd of suggested clipHead. Note the winding direction arrows on the top of the spool. Turn the spool in this direction.MoreHead. Note the winding direction arrows on the top of the spool. Turn the spool in this direction. And you will automatically wind the line onto the spool.
How do you put a universal trimmer head on?
0:001:41Universal Bump Trimmer Head Installation Method 3 - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt place the nut inside of the head attach the head on to the male Bolton. Make sure the headMoreIt place the nut inside of the head attach the head on to the male Bolton. Make sure the head attaches.
How do you change the spool on a Stihl weedeater?
1:016:41Stihl Trimmer Line Replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipOn the trim cut you simply unscrew the star nut on the head once the star nut is loose remove. TheMoreOn the trim cut you simply unscrew the star nut on the head once the star nut is loose remove. The nut and the spool.
How do you change the head on a Stihl FSA 56?
0:001:31Replacing AutoCut® 2-2 Trimmer Line on FSA 56 - YouTubeYouTubeStart of suggested clipEnd of suggested clipNext depress these two chaps on the melon head and the cap and spool will release. You can nowMoreNext depress these two chaps on the melon head and the cap and spool will release. You can now remove the old. School. Clean the mowing head of any grass dirt or debris. Then with your new autocad.
How to choose a head for trimmer?
In order for the mowing head to show high efficiency, the owner of the lawn mowers will need to correctly approach her choice. In this case, several factors must be taken into account:
How are trimmer heads divided?
All trimmer heads are pre-divided by type of cutting line feed. Depending on this factor, the following types of devices can be found on the market: tame. In spools of this type, fishing line must be fed manually. To stretch the right amount of cutting cord, you need to stop the lawn mowing, and lengthen the ends.
What is the most reliable mowing head?
1st place. EFCO 8100 . This model is one of the most reliable mowing heads. It works in a fully automatic mode, which simplifies its refueling with a cutting cord. To work with the spool, only a thin fishing line is used. The case of the model is made of durable multilayer plastic.
What is automatic trimmer head?
The automatic trimmer head is the most convenient fixture, however, due to its more complex design, the owner is forced to repair the fixture more often. Read more: How to Lubricate an Electric Oil Trimmer. In addition to the classification according to the method of feeding the fishing line, the spools for trimmers are initially divided ...
How are spools divided for fishing line trimmers?
In addition to the classification according to the method of feeding the fishing line, the spools for trimmers are initially divided among themselves by cutting cord charging method. Depending on this factor, the following types of devices are found:
What happens if a Stihl trimmer head breaks?
If the head wears out, breaks or becomes unbalanced, it will need replaced with a new head. Some Stihl trimmer models may also be fitted with alternate cutting heads, including metal blades or brush knifes for heavy grass cutting or different types of string heads for varying types of light grass cutting. You do not need to remove the line ...
How to unscrew a trimmer head?
Twist the trimmer head clockwise to unscrew it from the shaft. When you turn the head, it will hit the stop places in the output shaft, allowing the trimmer head to twist off the gear head. Place the trimmer head aside.
How to block the output shaft on a rotary trimmer?
Block the output shaft with the pin, if you removed it after you took the old cutting head off the trimmer. If the pin is still in place, ensure it is pushed in all the way.
What is a FS55 straight shaft trimmer?
The Stihl FS55 straight shaft trimmer comes standard with the Stihl Autocut dual line trimmer head from the manufacturer. The nylon line loaded on the spool in the trimmer head is designed to cut grass and weeds in residential and commercial applications. The line is worn down by normal use and will need to be replaced on an ongoing basis. Loading new line in the Autocut trimmer head first involves accessing the spool inside the trimmer head.
How to remove a spool from a spool trimmer?
Press down on the spool and rotate slightly to the left then pull it straight off the trimmer head.
How to put a spool in a trimmer?
Place the spool in the trimmer head with the side notches along side the line eyelets on the head. Push down slightly and rotate to lock it in place. Pull the line to release it from the notch and place it in the eyelet on both sides of the trimmer head.
How to remove the cover from a spherical trimmer?
Hold the body of the trimmer head with one hand. Rotate the head to locate one of the two tab connection points on the trimmer head. Press the tab in with the thumb on your other hand, rotate the head and press in the other tab. Pull the cover from the trimmer head.
How to lock a notch on a weed eater?
Push down slightly and rotate to lock it in place. Pull the line to release it from the notch and place it in the eyelet on both sides of the trimmer head. Line up the tabs on the trimmer head cover with the holes in the trimmer head. Push the cover straight on until it snaps in place.
How to turn a chevy trimmer head?
Position the trimmer head just above the ground. Press the trigger throttle to start the trimmer head turning. Continue to hold the trigger throttle down and lower the trimmer head to bump the tap button on the bottom of the trimmer head on the ground.
What size line does a Stihl trimmer use?
Additionally, what size line does a Stihl trimmer use? String Diameters For example, the Stihl AutoCut 25-2 requires either a . 08-inch line or a . 095-inch line. However, each trimmer head model may vary slightly, so read the label on the package of your trimmer head.
How does a bump feed electric trimmer work?
When you press the head of your trimmer against a flat surface, it squeezes a spring in the head of the string trimmer. This action releases string from the spool so you have a line with which you can cut down debris. The bump feed electric trimmer uses centrifugal force to pull the string from the spool.
