How do you change a spark plug on a Poulan chainsaw? Remove the (3) screws securing the top cover to the saw. Remove the spark plug boot. Use a spark plug wrench (or socket) to loosen the spark plug. Remove the spark plug from the cylinder.
How to replace chain adjuster screw on Poulan chainsaw?
- Place the saw on a flat bench and ensure there are no obstructions around the chain, which will spin during this procedure.
- Unscrew and remove the three screws holding the engine cover and remove the cover.
- Locate the idle adjustment screw.
- Start the saw and let it idle for two or three minutes to warm up.
- Tip.
How to replace gas tubing on a Poulan Chain Saw?
When it's time to replace the chainsaw fuel lines, it's important that you cut the new tubes to the proper length. Use needle-nose pliers to remove the tubes from the carburetor and pull them from...
Are Poulan chainsaws better than McCulloch chainsaws?
Top positive review I use several saws from, Stihl, Homelite, Poulan and McCulloch. By far this McCulloch saw for the money is great. It is powerful and does not bog down easily. I would recommend this saw to anyone who is considering purchasing a fine chainsaw.
How to replace recoil spring on Poulan chainsaw?
How to Repair a Pull Starter on a Poulan Chain Saw
- Drain the Poulan chain saw's fuel from its fuel tank to a watertight, disposable container. ...
- Unscrew the top engine cylinder shroud retaining screws with a T-25 torx head socket wrench. Lift the top engine cylinder shroud from the engine.
- Flip the chain saw onto its right side, gaining access to the four fan housing retaining screws. ...
How do you change spark plugs on a Poulan?
Remove the top cover.Remove the (3) screws securing the top cover to the saw. ... Remove the spark plug boot.Use a spark plug wrench (or socket) to loosen the spark plug.Remove the spark plug from the cylinder.The "gap" is the distance between the ground electrode (metal strap) and the center electrode.More items...
Can't get my Poulan chainsaw started?
In warm weather, your Poulan chain saw may fail to start after sitting for 15 to 30 minutes because the carburetor has become vapor locked. This occurs when hot gas evaporates in the carburetor and prevents the right amount of fuel from reaching it.
What size spark plug does a Poulan chainsaw take?
A: All of our current chainsaws use a Champion RCJ7Y or Torch R7 spark plugs- which are interchangeable. We recommend checking with your Poulan or Poulan PRO servicing dealer for exact details. Follow the spark plug replacement procedures in the operator's manual if doing the work yourself.
How do you remove a spark plug from a chainsaw?
1:434:58How to change the chainsaw's spark plug - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo to remove the spark plug what I will do is insert the wrench onto the spark plug turnMoreSo to remove the spark plug what I will do is insert the wrench onto the spark plug turn counterclockwise to loosen the plug. And then I will just go ahead and thread it out by. Hand.
Why is my chainsaw not getting spark?
0:178:32HOW-TO Fix A Chainsaw With No Spark - Ignition Module ReplacementYouTubeStart of suggested clipEnd of suggested clipIf you don't have any spark then more than likely it is the ignition module failing on you you wantMoreIf you don't have any spark then more than likely it is the ignition module failing on you you want to make sure first before you replace an ignition module.
Why is it so hard to start my chainsaw?
A fuel issue is one of the most common reasons why a chainsaw won't start. If the operator has repeatedly been trying to start the chainsaw through the recoil starter system, they may have accidentally flooded the engine with fuel. A common indication the engine has been flooded is the smell of gasoline in the air.
Where is the spark plug located on a Poulan?
0:522:52Poulan Chainsaw Repair - How to Replace the Spark Plug - YouTubeYouTubeStart of suggested clipEnd of suggested clipCover. With the cover removed. Now I have access to the spark plug boot. And the spark plug I'llMoreCover. With the cover removed. Now I have access to the spark plug boot. And the spark plug I'll remove the boot. And go ahead and remove the plug using a socket. Wrench.
What spark plug does a Poulan Pro take?
Champion spark plug (RCJ6Y).
What kind of gas does a Poulan chainsaw use?
Proper Fuels Poulan engines are designed to run best on 87-octane regular unleaded gasoline -- avoid using diesel fuel and E85. Gasoline can be blended with 10 percent alcohol at the most, but do not store the saw with an alcohol-blended gasoline.
What is the spark plug gap on a chainsaw?
Most of the chainsaws have a 0.025 gap in their spark plug. Different manufacturers make different kinds of chainsaws. However, the basic structure is constant.
What size are chainsaw spark plugs?
Same as a standard 14mm car plug iirc, the skinny style plugs.
How much is a spark plug wrench?
Compare with similar itemsThis item Briggs & Stratton Spark Plug Wrench 5402KBriggs & Stratton 19576S Spark Plug Wrench 8-Inch Replaces 19374S/19374/690966/19576Add to CartAdd to CartCustomer Rating4.6 out of 5 stars (273)4.5 out of 5 stars (377)Price$1149$574Sold ByMcCarty MotorsAmazon.com2 more rows
How to remove a spark plug from a saw?
REMOVING THE SPARK PLUG [top] 1. Remove the top cover. Remove the (3) screws securing the top cover to the saw. Lift the top cover away from the saw. 2. Remove the spark plug. Remove the spark plug boot. Use a spark plug wrench (or socket) to loosen the spark plug. Remove the spark plug from the cylinder.
How to loosen spark plugs?
Use a spark plug wrench (or socket) to loosen the spark plug. Remove the spark plug from the cylinder. ADJUSTING THE GAP [top] 3. Adjust the gap on the new spark plug. The "gap" is the distance between the ground electrode (metal strap) and the center electrode.
What happens if you use a wrong spark plug?
If the fuel mixture is too lean, or if the wrong spark plug is used, the ceramic insulator can be cracked .
Why do spark plugs wear?
The spark plug uses the electricity generated by the ignition coil to create a spark, which ignites the air-fuel mixture in the combustion chamber. The intense heat in the combustion chamber, along with the high voltage used for ignition , cause spark plugs to wear.
How do I clean a chainsaw spark plug?
how do you clean a chainsaw spark plug? Use a clean cloth or brush to remove any visible or large debris from the spark plugs. For cleaning the firing end of the plug, you can use a quick drying liquid, like 90% strength alcohol or carburetor cleaner or mineral spirit.
How often should I change the spark plug on a Stihl chainsaw?
Consequently, Stihl recommends replacing the spark plug after every 100 service hours.
How to get spark plugs out of cylinder?
Grasp the black, rubber spark plug boot on the front of the engine, and pull it straight up and off the spark plug. Place a 3/4-inch socket wrench on top of the spark plug, turn it counterclockwise and pull the spark plug out of the cylinder.
How to get spark plugs out of cylinder?
Grasp the black, rubber spark plug boot on the front of the engine, and pull it straight up and off the spark plug. Place a 3/4-inch socket wrench on top of the spark plug, turn it counterclockwise and pull the spark plug out of the cylinder.
How to stop a chainsaw engine?
1. Release the trigger on your chainsaw and slide the ignition switch in the rear of the engine down to the "Off" position to stop the engine. Lay the chainsaw on a flat surface and allow it to cool completely.
What to wear when cutting a tree with a chainsaw?
Wear close-fitting clothes that are not restrictive when operating a chainsaw. Loose clothing can become caught on moving parts or on tree parts, causing tripping and serious injuries. Maintain secure footing and a clear path of escape before starting a cut on a tree or limbs. Always use both hands on the chainsaw while in operation, ...
What is Poulan Wildthing?
A Poulan WildThing chainsaw is manufactured for homeowner's and farmers who use a chainsaw less regularly, but want the power for optimum performance with a reasonable price. A WildThing is identifiable easily by the bright green and purple colors on the engine covers.
