How do you change a blade on a skilsaw 5150?
- Turn the Skilsaw off.
- Press the red button to lock the blade.
- Lift the safety guard.
- Use a 3/4" wrench to remove the retaining bolt from the center of the blade on your Skilsaw.
- Place the new blade on the Skilsaw.
- Replace the retaining bolt to lock the new blade into position.
How do I change a blade on a SKILSAW?
Please try again later. To change a blade on a skilsaw, lock the blade, remove the retaining bolt with a wrench, remove the old blade, replace with the new blade and lock it into place. Release the safety guard after the new blade is locked with advice from a foreman in this free video on changing a skilsaw blade.
How to use a SKILSAW circular saw properly?
Take the blade and bring it near the arbor of the saw. An arrow exists on the Skilsaw circular saw to indicate its direction of rotation. The teeth of the blade should face in that direction. Take a hammer and drive the blade into the shaft if needed.
How do you change the direction of a circular saw blade?
The blade is held at its place by a nut called the arbor nut. Take a wrench, place it on the arbor nut and rotate it in the direction that the blade cuts in to loosen it. If you have a direct saw-drive, rotate the wrench in an anti-clockwise direction and if it is a worm drive saw, then rotate it in the clockwise direction.
How do you remove the safety guard on a SKILSAW?
The safety guard on most Skilsaws is a plastic sheath that covers the blade when it is not making a cut. Lifting the guard slides it out of the way and exposes the blade so it can be removed and replaced. Use a 3/4" wrench to remove the retaining bolt from the center of the blade on your Skilsaw.
Where is the blade lock on a skill saw?
1:219:44How to Remove Saw Blade With No Spindle Lock - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhat's called the spindle lock which is this little lever right here you push this down. You hold itMoreWhat's called the spindle lock which is this little lever right here you push this down. You hold it spin the saw and that kind of drops in.
Where is the arbor lock on a circular saw?
Place the saw on a wooden surface and pull back the blade guard. If the saw has an arbor lock button on the top of the housing, press it in. The arbor is the shaft the blade installs on. If there's no lock button, press the blade into the wooden surface.
How do you change a blade on a circular saw without a lock?
1:065:34Remove saw blade without lock button: Skilsaw 5400 - YouTubeYouTubeStart of suggested clipEnd of suggested clipLooking back at the skill saw 5400. We can see that the power cord is disconnected from theMoreLooking back at the skill saw 5400. We can see that the power cord is disconnected from the electrical. Outlet. We can see that the shaft and the fastener rotate with the wrench. We can also see that
How do you change a blade on a skilsaw?
0:111:00How to Change a Blade on a Skilsaw - YouTubeYouTubeStart of suggested clipEnd of suggested clipPress the safety button to lock the blade lift. The safety guard lifting the guard slides it out ofMorePress the safety button to lock the blade lift. The safety guard lifting the guard slides it out of the way and exposes the blade. So it can be removed and replaced.
How do you change a blade on a skilsaw miter saw?
1:395:31How to change the blade on a SkilSaw compound miter sawYouTubeStart of suggested clipEnd of suggested clipAfter you get the nut off there's a big washer in here that acts like a clamp to keep the saw bladeMoreAfter you get the nut off there's a big washer in here that acts like a clamp to keep the saw blade in place you want to go ahead and pull that out. Now you can take the saw blade. Out.
How do you change the blade on a skilsaw 5480?
1:094:37SkilSaw 5400 5180 blade replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo after you lock the blade. So it can turn you're going to turn counterclockwise okay and it'sMoreSo after you lock the blade. So it can turn you're going to turn counterclockwise okay and it's going to remove the bolt right there. After you remove the bolt.
How do you change the blade on a skilsaw 5400 circular saw?
Skil 5400 Saw User ManualTurn BLADE STUD with wrench provided. counter-clockwise and remove BLADE STUD. ... Retract the lower guard all the way up into. the upper guard. ... Make sure the saw teeth and arrow on the. ... Slide blade through slot in the foot and. ... Reinstall OUTER WASHER and tighten.
How do you loosen a circular saw blade?
0:251:38How to Change a Circular Saw Blade - YouTubeYouTubeStart of suggested clipEnd of suggested clipPress the spindle lock in while you turn the blade until you feel it engage. You'll know because theMorePress the spindle lock in while you turn the blade until you feel it engage. You'll know because the blade won't turn. Now loosen the bolt by turning it counterclockwise.
How to change blade on a skilsaw?
Step 1. Turn the Skilsaw off. Then unplug the Skilsaw from the wall so there is no power to the motor. If your Skilsaw was in use at the time you decided to change the blade, let the saw sit for 10 minutes so the blade has time to cool.
Why lock blade on skilsaw?
Locking the blade holds it in place and prevents it from being able to turn freely. Restricting the movement of the blade will reduce the chances of being accidentally cut while changing the blade on your Skilsaw.
What wrench to use for a skilsaw?
A 3/4" socket wrench works just as well. When the retaining bolt has been removed, the blade on the Skilsaw will be loose, and can be lifted out and set to the side. Note that, on some Skilsaw models, there is a simple nut that is removed, rather than a bolt.
What is a rusty old saw blade?
Rusty old saw blade. Skil is a brand of circular saws. The brand is so widely recognized that most people refer to any circular saw as a Skilsaw, much as some people refer to photocopiers as a Xerox machine. Skilsaws are among the most important tools used in construction, particularly on job sites that require the measuring and cutting of lumber.
What is a safety guard on a skilsaw?
The safety guard on most Skilsaws is a plastic sheath that covers the blade when it is not making a cut. Lifting the guard slides it out of the way and exposes the blade so it can be removed and replaced. Advertisement.
Can you add specialty blades to a skilsaw?
Hunker may earn compensation through affiliate links in this story. You can add specialty blades to your Skilsaw to make it easier to cut through specific materials, such as using a masonry blade to cut through brick or concrete. Handle your saw blades with care.
Do skilsaw blades wear out?
The blades on these saws are highly durable, but do eventually wear out with use. This makes it essential to change the blade on your Skilsaw periodically, to make sure that all of your cuts are clean and have a minimal amount of wood splintering at the end of the cut.
How to remove a blade from a Skilsaw?
To remove the damaged blade, locate and identify the Skilsaw circular saw’s blade lock button, which is usually the red button on one side of the saw. Hold the button, and spin the blade a little till the blade locks in place. Locking the blade restricts its movement and prevents accidental cuts during the changing process.
How to loosen a saw blade?
Take a wrench, place it on the arbor nut and rotate it in the direction that the blade cuts in to loosen it. If you have a direct saw-drive, rotate the wrench in an anti-clockwise direction and if it is a worm drive saw, then rotate it in the clockwise direction.
What is a skilsaw?
Skilsaws are special kinds of circular saws that are more powerful and can be used for various purposes. The blade is the heart of the saw, and this article will teach you how to change a blade on a Skilsaw circular saw. Contents [ show]
What does it mean when a saw blade is rough?
While cutting the wood, if the cuts become rough, it may indicate that the blades require replacement. If some burn marks appear on the wood surface, this means your Skilsaw circular saw blade needs replacement. Long usage of damaged blades can cause permanent damage to the saw.
How to keep a saw sharp?
To ensure smooth functioning and longevity of the saw, use friction-reducing Skilsaw oil. This also increases the sharpness of the teeth of the saw. There are a variety of blade cleaners available that should be used to clean the saw. Always go for bio-degradable and non-toxic cleaners.
What is a circular saw?
A circular saw is used for cutting wood which in turn adds to the beauty of your room. If the saw’s blade isn’t in proper condition, it doesn’t yield a perfect result. Hence knowing to change your saw’s blade is important, as is knowing how to use it.
