Receiving Helpdesk

how do you change a belt on a yard machine edger

by Ebony Kutch Sr. Published 3 years ago Updated 2 years ago

The first step to replacing the lawn edger drive belt is to remove the spark plug wire. While working around the blade part of the edger you want to make sure that there is no chance the tool will start. Pull back the rubber boot that holds the wire to the spark plug. Continue to pull on the boot until it is removed.

Part of a video titled How to Replace Edger Belt | Troy Bilt, Craftsman, Yard Machines
5:37
8:25
The top one you see how the belt is angled like that. So the angle faces inward on that top heli.MoreThe top one you see how the belt is angled like that. So the angle faces inward on that top heli. The top pulley. There. On the bottom pulley the flat side goes inward like that see.

Full Answer

How do you replace a drive belt on a lawn edger?

Replacing a belt involves noting the correct orientation, adjusting a fastener and adding a new belt. Stand in front of the edger and take a look at the existing orientation of the drive belt if it's still on the lawn edger, and take a photograph of the routing with a camera.

What are the parts numbers for Edger belts?

Original Equipment part for edger belts 954-0142 and 754-0142. Factory tested and approved to provide the perfect fit, strength, durability and performance. Oil, heat and dirt resistant material provides superior durability.

How does an edger blade drive belt work?

Most gas-powered edger blades are powered by a rubber belt that runs from the engine pulley to the drive pulley. The belt is elongated to engage the edger blade. Over time, your edger drive belt can crack or break entirely.

How do I change the blade on my Edger?

Lay the edger on its side with the blade guard, blade and belt facing up. Take off the belt guard screws or bolts. On some edgers, the belt guard may be held in place by screws, on others bolts. Use either a screwdriver or wrench to remove them, depending on the model of your edger. Pull the blade engage mechanism up by pulling up on the handle.

How do I put a drive belt on a lawn edger?

Why do lawn edgers wear belts?

Can you replace a belt if it's broken?

About this website

Why is my edger not working?

0:062:01Top Reasons Edger Won't Start — Edger Troubleshooting - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf your edger won't start here are the top three most probable causes due to carbon buildup and aMoreIf your edger won't start here are the top three most probable causes due to carbon buildup and a weakened electrode the spark plug will degrade over time. Which can prevent the edger from.

How do you remove the blade from a Mclane edger?

0:132:06* Mclane edger blade change replace - YouTubeYouTubeStart of suggested clipEnd of suggested clipAlright. So we're going to lefty loosey righty tighty just give it a quick dirt to break it. Free.MoreAlright. So we're going to lefty loosey righty tighty just give it a quick dirt to break it. Free. Take the big washer and a lock washer. Office is a lock washer blade ah it's a half-inch hole.

What size belt does a Mclane edger use?

Mclane Edger Belt 4L-300 1/2"X30" fits many mower Oil-Heat Treated 2058.

How much is a Troy Bilt edger?

Compare with similar itemsThis item Troy-Bilt 25A-304-766 TBE304 30cc 4-Cycle EdgerScotts Outdoor Power Tools ED70012S 11-Amp 3-Position Corded Electric Lawn Edger, GreenCustomer Rating4.3 out of 5 stars (21)4.1 out of 5 stars (375)Price$22999$99.99$99.99Sold ByPandishAmazon.comItem Weight29.00 lbs13.00 lbs2 more rows

How often should I change my edger blade?

When should I replace the edger blade? A: Edger blades vary in length from 8 to 10 inches when new, so you should be able to go through a season without replacing the blade. However, if you are using your edger more frequently, performance will start to deteriorate after the blade reaches half its original size.

How do you change the blade on a trimmer plus edger?

0:363:23How To: Changing the Blade on a Stick Edger or Edger Attachment ...YouTubeStart of suggested clipEnd of suggested clipAll right we can take that nut off of there take the big washer. Off. That's gonna expose the blade.MoreAll right we can take that nut off of there take the big washer. Off. That's gonna expose the blade. So you can just wiggle it and take it off. Like.

Where is the model number on a McLane edger?

0:181:03Edger – How to Find the Model Number - YouTubeYouTubeStart of suggested clipEnd of suggested clipAlthough it may require some effort to find it this label can often be found on the front of theMoreAlthough it may require some effort to find it this label can often be found on the front of the motor casing on the back.

How do you change a belt on a McLane lawn mower?

1:236:09McLane clutch belt replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis clutch forward and i took this spring off it just pops right off at least for me it did thereMoreThis clutch forward and i took this spring off it just pops right off at least for me it did there may be a nut there you have to loosen uh on your machine. So now i'm going to slip the old belt. Off.

How do you put a belt on a Craftsman edger?

5:448:25How to Replace Edger Belt | Troy Bilt, Craftsman, Yard Machines - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you have to like push with one hand on this part here just push it that way to compress theMoreSo you have to like push with one hand on this part here just push it that way to compress the spring enough to be able to pop this over the pulley.

What kind of oil does a Troy Bilt Edger take?

SAE 30 Engine Oil - 2 oz.

What kind of gas does a Troy Bilt Edger take?

regular gasTroy-Bilt's 4-cycle engines take regular gas.

Will Dewalt make an edger?

Get the versatility and edging power you need to get the job done with the DEWALT Universal Edger Attachment. This adaptable add-on will conveniently change your ATTACHMENT CAPABLE power head into an edger. Tackle a variety of tasks with a durable 7-1/2 in.

How do I put a drive belt on a lawn edger?

Step 1. Stand in front of the edger and take a look at the existing orientation of the drive belt if it's still on the lawn edger, and take a photograph of the routing with a camera. Cellphone cameras are good for this. This will help you put the new drive belt on correctly. You can also draw a sketch by hand.

Why do lawn edgers wear belts?

Cellphone with camera (optional) Wrench. Gas lawn edgers use a drive belt that runs from the engine flywheel pulley. The belts wear due to heat stresses and use. It's a good idea to replace the belt if you see signs of rotting, cracking or shredding.

Can you replace a belt if it's broken?

The belt must be replaced if it's broken completely, and the edger won't work if that's the case. Replacing a belt involves noting the correct orientation, adjusting a fastener and adding a new belt. Advertisement.

How to stop a belt edger from tipping?

Place a heavy brick or other object over the handle to prevent the edger from tipping back up. Remove all the screws from the belt guard and set aside. Push the blade bearing housing toward the engine of the edger to release the tension on the drive belt.

How long does it take to replace a Toro mower belt?

Replacing the drive belt is a fairly simple task and can be completed in about 45 minutes. You can check online for the correct belt for the model number of your mower or have your lawn shop look up the correct belt.

What is a lawn edger?

If you want a well-manicured lawn, a must-have tool is a lawn edger. Edgers are used to give your a lawn a nice finished edge where it adjoins sidewalks or driveways. Edgers may either be electric powered or gas powered. Gas-powered edgers have a drive belt which spins the edger blade.

What is the best tool to use to make a lawn?

If you want a well-manicured lawn, a must-have tool is a lawn edger. Edgers are used to give your a lawn a nice finished edge where it adjoins sidewalks or driveways. Tilt the edger backward until the handle lies flat on the ground. Place a heavy brick or other object over the handle to prevent the edger from tipping back up.

How do I put a drive belt on a lawn edger?

Step 1. Stand in front of the edger and take a look at the existing orientation of the drive belt if it's still on the lawn edger, and take a photograph of the routing with a camera. Cellphone cameras are good for this. This will help you put the new drive belt on correctly. You can also draw a sketch by hand.

Why do lawn edgers wear belts?

Cellphone with camera (optional) Wrench. Gas lawn edgers use a drive belt that runs from the engine flywheel pulley. The belts wear due to heat stresses and use. It's a good idea to replace the belt if you see signs of rotting, cracking or shredding.

Can you replace a belt if it's broken?

The belt must be replaced if it's broken completely, and the edger won't work if that's the case. Replacing a belt involves noting the correct orientation, adjusting a fastener and adding a new belt. Advertisement.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9
8.3.21PHP Version1.42sRequest Duration2MBMemory UsageGET {post}Route
  • warninglog[15:15:27] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[15:15:27] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[15:15:27] LOG.warning: Callables of the form ["Swift_SmtpTransport", "Swift_Transport_EsmtpTranspor...
  • warninglog[15:15:27] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[15:15:27] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[15:15:27] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[15:15:27] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[15:15:27] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[15:15:27] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • Booting (10.46ms)
  • Application (1.41s)
  • 1 x Application (99.24%)
    1.41s
    1 x Booting (0.74%)
    10.46ms
    7 templates were rendered
    • themes.DevBlog.content.post (resources/views/themes/DevBlog/content/post.blade.php)34blade
      Params
      0
      post
      1
      postContent
      2
      author
      3
      updated_at
      4
      bing_rich_snippet_text
      5
      bing_rich_snippet_link
      6
      bing_related_keywords
      7
      google_related_keywords
      8
      bing_news_title
      9
      bing_news_description
      10
      bing_videos
      11
      bing_images
      12
      bing_search_result_title
      13
      bing_search_result_description
      14
      bing_search_result_url
      15
      bing_paa_questions
      16
      bing_paa_answers
      17
      bing_slider_faq_questions
      18
      bing_slider_faq_answers
      19
      bing_pop_faq_questions
      20
      bing_pop_faq_answers
      21
      bing_tab_faq_questions
      22
      bing_tab_faq_answers
      23
      google_faq_questions
      24
      google_faq_answers
      25
      google_rich_snippet
      26
      google_search_result
      27
      indexedArray
      28
      total_images
      29
      total_videos
      30
      settings
      31
      url_current
      32
      menus
      33
      sidebar
    • themes.DevBlog.layouts.master (resources/views/themes/DevBlog/layouts/master.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.head (resources/views/themes/DevBlog/panels/head.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.header (resources/views/themes/DevBlog/panels/header.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.navbar (resources/views/themes/DevBlog/panels/navbar.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.footer (resources/views/themes/DevBlog/panels/footer.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.scripts (resources/views/themes/DevBlog/panels/scripts.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    uri
    GET {post}
    middleware
    web, checkdate
    as
    post.show
    controller
    App\Http\Controllers\Frontend\json_data\PostController@show
    namespace
    where
    file
    app/Http/Controllers/Frontend/json_data/PostController.php:18-166
    7 statements were executed1.38s
    • select * from `posts` where `published_at` <= '2025-06-12 15:15:27' and `slug` = 'how-do-you-change-a-belt-on-a-yard-machine-edger' and `posts`.`deleted_at` is null limit 1
      2.93ms/app/Providers/RouteServiceProvider.php:54receivinghelpdeskask
      Metadata
      Bindings
      • 0. 2025-06-12 15:15:27
      • 1. how-do-you-change-a-belt-on-a-yard-machine-edger
      Backtrace
      • 15. /app/Providers/RouteServiceProvider.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/Router.php:842
      • 19. Route binding:39
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/framework/src/Illuminate/Foundation/Http/Middleware/VerifyCsrfToken.php:78
    • select * from `json_post_contents` where `json_post_contents`.`post_id` = 196355 and `json_post_contents`.`post_id` is not null and `rewrite_id` = 0
      15.9msmiddleware::checkdate:30receivinghelpdeskask
      Metadata
      Bindings
      • 0. 196355
      • 1. 0
      Backtrace
      • 19. middleware::checkdate:30
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/jetstream/src/Http/Middleware/ShareInertiaData.php:61
      • 22. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/Middleware/SubstituteBindings.php:50
    • select * from `nova_menu_menus` where `slug` = 'header' limit 1
      1.51ms/vendor/outl1ne/nova-menu-builder/src/helpers.php:32receivinghelpdeskask
      Metadata
      Bindings
      • 0. header
      Backtrace
      • 15. /vendor/outl1ne/nova-menu-builder/src/helpers.php:32
      • 17. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 19. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
      • 20. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:205
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`menu_id` = 1 and `nova_menu_menu_items`.`menu_id` is not null and `parent_id` is null order by `parent_id` asc, `order` asc, `name` asc
      830μs/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Bindings
      • 0. 1
      Backtrace
      • 19. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 20. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 22. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 24. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`parent_id` in (1) order by `order` asc
      300μs/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Backtrace
      • 24. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 25. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 27. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 28. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 29. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select `id`, `post_title`, `slug` from `posts` where `status` = 'publish' and `posts`.`deleted_at` is null order by RAND() limit 10
      1.36s/app/View/Composers/SidebarView.php:22receivinghelpdeskask
      Metadata
      Bindings
      • 0. publish
      Backtrace
      • 14. /app/View/Composers/SidebarView.php:22
      • 15. /app/View/Composers/SidebarView.php:12
      • 16. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:124
      • 17. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:162
      • 20. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:177
    • select * from `fake_users` where `fake_users`.`id` = 49855 limit 1
      850μsview::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15receivinghelpdeskask
      Metadata
      Bindings
      • 0. 49855
      Backtrace
      • 21. view::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15
      • 23. /vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:108
      • 24. /vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
      • 25. /vendor/livewire/livewire/src/ComponentConcerns/RendersLivewireComponents.php:69
      • 26. /vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:61
    App\Models\FakeUser
    1
    Outl1ne\MenuBuilder\Models\MenuItem
    1
    Outl1ne\MenuBuilder\Models\Menu
    1
    App\Models\JsonPostContent
    1
    App\Models\Post
    11
        _token
        uvWe9vK8wIJ0uiuMJPDYOkROsSer2fbuCCHIpWWB
        _previous
        array:1 [ "url" => "https://receivinghelpdesk.com/ask/how-do-you-change-a-belt-on-a-yard-machine-e...
        _flash
        array:2 [ "old" => [] "new" => [] ]
        PHPDEBUGBAR_STACK_DATA
        []
        path_info
        /how-do-you-change-a-belt-on-a-yard-machine-edger
        status_code
        200
        
        status_text
        OK
        format
        html
        content_type
        text/html; charset=UTF-8
        request_query
        []
        
        request_request
        []
        
        request_headers
        0 of 0
        array:25 [ "cookie" => array:1 [ 0 => "_pk_id.64.7c30=bb8ad1092e2aec0f.1749721519.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6Ik16UTR5Z2dMak1Zc2g5UGV6enhkOGc9PSIsInZhbHVlIjoiTlY5ZzNJWVpQNHY1cFhuUHFpNVRaTitGaFNxMkx2a3ZqY2VCSEFSS2grbHh4NnVNMHEyenEwUGJSUnpac2JyTjZZT0RDekFiWnYvVWlzaStwREJZVGxiQm5VTDdQQlZLNnlHMktOa0ljU1hVTU5aL1VrMWx2d3dTWEJDNUhHakoiLCJtYWMiOiIwNjI0NWFlMDk4YzM0MmQwZjhlZGZhNGFiN2NmNjI4MzExZmYxMjZmNGE0YzZjNmM3NDE1ODY4NWY5ODMzNDBkIiwidGFnIjoiIn0%3D; askhelpdesk_session=eyJpdiI6Im8weUc2bUE4Ums2SmhhaHRnMHdUdEE9PSIsInZhbHVlIjoiRWNxMHdoTWlFQnhwTWpVNERyTytpU0FnUFl3eDJKV3ZzZVdaZXFIb2h3dmZjTjMxOFhCbVNDWFVWeStnemJlWk15QitQQjA0cjliOTFocm9sZDZvY3Y3UTkzWWRMYWJ6WWpHQ0N3OFNES1NtZkpiRFl3Z09qZ2pQRkdkR2wxbVkiLCJtYWMiOiI0MDRiNmNkNDEwYWE2MzJjZDgzZTQ2OTgyYThhYWY0MTZjZjE4MDRjMmE4ODEzNDk2ZjY0ZDg3MWQ3MDc3NTI4IiwidGFnIjoiIn0%3D_pk_id.64.7c30=bb8ad1092e2aec0f.1749721519.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6Ik16UTR5Z2dMak1Zc2g5UGV6enhkOGc9PSIsInZhbHVlIjoiTlY5ZzNJWVpQNHY1cFhuUHFpNVRaT" ] "cf-ipcountry" => array:1 [ 0 => "US" ] "cf-connecting-ip" => array:1 [ 0 => "216.73.216.125" ] "cdn-loop" => array:1 [ 0 => "cloudflare; loops=1" ] "sec-fetch-mode" => array:1 [ 0 => "navigate" ] "sec-fetch-site" => array:1 [ 0 => "none" ] "accept" => array:1 [ 0 => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" ] "user-agent" => array:1 [ 0 => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" ] "upgrade-insecure-requests" => array:1 [ 0 => "1" ] "sec-ch-ua-platform" => array:1 [ 0 => ""Windows"" ] "sec-ch-ua-mobile" => array:1 [ 0 => "?0" ] "sec-ch-ua" => array:1 [ 0 => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" ] "cache-control" => array:1 [ 0 => "no-cache" ] "pragma" => array:1 [ 0 => "no-cache" ] "accept-encoding" => array:1 [ 0 => "gzip, br" ] "cf-ray" => array:1 [ 0 => "94e86a5c386cc5fe-ORD" ] "priority" => array:1 [ 0 => "u=0, i" ] "sec-fetch-dest" => array:1 [ 0 => "document" ] "sec-fetch-user" => array:1 [ 0 => "?1" ] "cf-visitor" => array:1 [ 0 => "{"scheme":"https"}" ] "connection" => array:1 [ 0 => "close" ] "x-forwarded-proto" => array:1 [ 0 => "https" ] "x-forwarded-for" => array:1 [ 0 => "216.73.216.125, 172.70.194.167" ] "x-server-addr" => array:1 [ 0 => "154.12.239.204" ] "host" => array:1 [ 0 => "receivinghelpdesk.com" ] ]
        request_server
        0 of 0
        array:56 [ "USER" => "runcloud" "HOME" => "/home/runcloud" "SCRIPT_NAME" => "/ask/index.php" "REQUEST_URI" => "/ask/how-do-you-change-a-belt-on-a-yard-machine-edger" "QUERY_STRING" => "" "REQUEST_METHOD" => "GET" "SERVER_PROTOCOL" => "HTTP/1.0" "GATEWAY_INTERFACE" => "CGI/1.1" "REDIRECT_URL" => "/ask/how-do-you-change-a-belt-on-a-yard-machine-edger" "REMOTE_PORT" => "47708" "SCRIPT_FILENAME" => "/home/runcloud/webapps/ReceivingHelpDesk/ask/index.php" "SERVER_ADMIN" => "you@example.com" "CONTEXT_DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "CONTEXT_PREFIX" => "" "REQUEST_SCHEME" => "http" "DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "REMOTE_ADDR" => "172.70.194.167" "SERVER_PORT" => "80" "SERVER_ADDR" => "127.0.0.1" "SERVER_NAME" => "receivinghelpdesk.com" "SERVER_SOFTWARE" => "Apache/2.4.63 (Unix) OpenSSL/1.1.1f" "SERVER_SIGNATURE" => "" "LD_LIBRARY_PATH" => "/RunCloud/Packages/apache2-rc/lib" "PATH" => "/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" "HTTP_COOKIE" => "_pk_id.64.7c30=bb8ad1092e2aec0f.1749721519.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6Ik16UTR5Z2dMak1Zc2g5UGV6enhkOGc9PSIsInZhbHVlIjoiTlY5ZzNJWVpQNHY1cFhuUHFpNVRaTitGaFNxMkx2a3ZqY2VCSEFSS2grbHh4NnVNMHEyenEwUGJSUnpac2JyTjZZT0RDekFiWnYvVWlzaStwREJZVGxiQm5VTDdQQlZLNnlHMktOa0ljU1hVTU5aL1VrMWx2d3dTWEJDNUhHakoiLCJtYWMiOiIwNjI0NWFlMDk4YzM0MmQwZjhlZGZhNGFiN2NmNjI4MzExZmYxMjZmNGE0YzZjNmM3NDE1ODY4NWY5ODMzNDBkIiwidGFnIjoiIn0%3D; askhelpdesk_session=eyJpdiI6Im8weUc2bUE4Ums2SmhhaHRnMHdUdEE9PSIsInZhbHVlIjoiRWNxMHdoTWlFQnhwTWpVNERyTytpU0FnUFl3eDJKV3ZzZVdaZXFIb2h3dmZjTjMxOFhCbVNDWFVWeStnemJlWk15QitQQjA0cjliOTFocm9sZDZvY3Y3UTkzWWRMYWJ6WWpHQ0N3OFNES1NtZkpiRFl3Z09qZ2pQRkdkR2wxbVkiLCJtYWMiOiI0MDRiNmNkNDEwYWE2MzJjZDgzZTQ2OTgyYThhYWY0MTZjZjE4MDRjMmE4ODEzNDk2ZjY0ZDg3MWQ3MDc3NTI4IiwidGFnIjoiIn0%3D_pk_id.64.7c30=bb8ad1092e2aec0f.1749721519.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6Ik16UTR5Z2dMak1Zc2g5UGV6enhkOGc9PSIsInZhbHVlIjoiTlY5ZzNJWVpQNHY1cFhuUHFpNVRaT" "HTTP_CF_IPCOUNTRY" => "US" "HTTP_CF_CONNECTING_IP" => "216.73.216.125" "HTTP_CDN_LOOP" => "cloudflare; loops=1" "HTTP_SEC_FETCH_MODE" => "navigate" "HTTP_SEC_FETCH_SITE" => "none" "HTTP_ACCEPT" => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" "HTTP_USER_AGENT" => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" "HTTP_UPGRADE_INSECURE_REQUESTS" => "1" "HTTP_SEC_CH_UA_PLATFORM" => ""Windows"" "HTTP_SEC_CH_UA_MOBILE" => "?0" "HTTP_SEC_CH_UA" => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" "HTTP_CACHE_CONTROL" => "no-cache" "HTTP_PRAGMA" => "no-cache" "HTTP_ACCEPT_ENCODING" => "gzip, br" "HTTP_CF_RAY" => "94e86a5c386cc5fe-ORD" "HTTP_PRIORITY" => "u=0, i" "HTTP_SEC_FETCH_DEST" => "document" "HTTP_SEC_FETCH_USER" => "?1" "HTTP_CF_VISITOR" => "{"scheme":"https"}" "HTTP_CONNECTION" => "close" "HTTP_X_FORWARDED_PROTO" => "https" "HTTP_X_FORWARDED_FOR" => "216.73.216.125, 172.70.194.167" "HTTP_X_SERVER_ADDR" => "154.12.239.204" "HTTP_HOST" => "receivinghelpdesk.com" "HTTPS" => "on" "REDIRECT_STATUS" => "200" "REDIRECT_HTTPS" => "on" "FCGI_ROLE" => "RESPONDER" "PHP_SELF" => "/ask/index.php" "REQUEST_TIME_FLOAT" => 1749721527.7321 "REQUEST_TIME" => 1749721527 ]
        request_cookies
        0 of 0
        array:4 [ "_pk_id_64_7c30" => null "_pk_ses_64_7c30" => null "XSRF-TOKEN" => "uvWe9vK8wIJ0uiuMJPDYOkROsSer2fbuCCHIpWWB" "askhelpdesk_session" => "o70uRm40DndKb87SAgIE7GJUKnxcA6zzEY3xjv0K" ]
        response_headers
        0 of 0
        array:7 [ "content-type" => array:1 [ 0 => "text/html; charset=UTF-8" ] "cache-control" => array:1 [ 0 => "private, must-revalidate" ] "date" => array:1 [ 0 => "Thu, 12 Jun 2025 09:45:27 GMT" ] "pragma" => array:1 [ 0 => "no-cache" ] "expires" => array:1 [ 0 => -1 ] "set-cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6IkQzN05zVlY3ZmZSSTd2ZHlaUmNpRFE9PSIsInZhbHVlIjoiREJCeDFueExOaytxY1BkZUNraVJtTzg4cVNUV2dvKzFEZnMvQllKZ2VLT1dhQ3pZOG5iaTV1ZGJ1YXlaQjFTcFpWUXVBSUI4blZtU1dZL2J6dTNEZklBRnZkenNhUkJCaTdDQTFqcnp3aXNXNzdDaytsT3hMZXNMUmxqZTVjTXgiLCJtYWMiOiI3YWUyMGI0YjI5MmRkMDRjMWFjZjZjZGMzMTE1OTJhMGUyNzQyYmU4ZDU4ZDZiYzdlMmI5YmRhODkyNzI4ZDMwIiwidGFnIjoiIn0%3D; expires=Thu, 12-Jun-2025 11:45:29 GMT; Max-Age=7200; path=/; samesite=laxXSRF-TOKEN=eyJpdiI6IkQzN05zVlY3ZmZSSTd2ZHlaUmNpRFE9PSIsInZhbHVlIjoiREJCeDFueExOaytxY1BkZUNraVJtTzg4cVNUV2dvKzFEZnMvQllKZ2VLT1dhQ3pZOG5iaTV1ZGJ1YXlaQjFTcFpWUXVBS" 1 => "askhelpdesk_session=eyJpdiI6ImVLRTJXSmpXQVcxRXNBczRHdlByR1E9PSIsInZhbHVlIjoiZTlPTCtZQ1hlSmxpOHBoRnpuL05xUThBcjVHakZWUHlwbnJ6Yi9LT0gvOWlBU05HeDE3TnJXaVhzR2xMOHg1MHdZTDVvRXoyaXJzLzBDUzBBUllGN3N3OGhQTmh5cTdPby91L0kvMEx3YmQ3YkR3RVphZXhYZlJLVDB5YzBPVDUiLCJtYWMiOiIzZWIwNDg1NjU4ZjgxYjZhMjQ5NDE2NjViZmNlMGFjYjlhODkwYjg2MjQzNzY2YTE5N2ViNDZmNzViNDQyMWMwIiwidGFnIjoiIn0%3D; expires=Thu, 12-Jun-2025 11:45:29 GMT; Max-Age=7200; path=/; httponly; samesite=laxaskhelpdesk_session=eyJpdiI6ImVLRTJXSmpXQVcxRXNBczRHdlByR1E9PSIsInZhbHVlIjoiZTlPTCtZQ1hlSmxpOHBoRnpuL05xUThBcjVHakZWUHlwbnJ6Yi9LT0gvOWlBU05HeDE3TnJXaVhzR2xMOHg1" ] "Set-Cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6IkQzN05zVlY3ZmZSSTd2ZHlaUmNpRFE9PSIsInZhbHVlIjoiREJCeDFueExOaytxY1BkZUNraVJtTzg4cVNUV2dvKzFEZnMvQllKZ2VLT1dhQ3pZOG5iaTV1ZGJ1YXlaQjFTcFpWUXVBSUI4blZtU1dZL2J6dTNEZklBRnZkenNhUkJCaTdDQTFqcnp3aXNXNzdDaytsT3hMZXNMUmxqZTVjTXgiLCJtYWMiOiI3YWUyMGI0YjI5MmRkMDRjMWFjZjZjZGMzMTE1OTJhMGUyNzQyYmU4ZDU4ZDZiYzdlMmI5YmRhODkyNzI4ZDMwIiwidGFnIjoiIn0%3D; expires=Thu, 12-Jun-2025 11:45:29 GMT; path=/XSRF-TOKEN=eyJpdiI6IkQzN05zVlY3ZmZSSTd2ZHlaUmNpRFE9PSIsInZhbHVlIjoiREJCeDFueExOaytxY1BkZUNraVJtTzg4cVNUV2dvKzFEZnMvQllKZ2VLT1dhQ3pZOG5iaTV1ZGJ1YXlaQjFTcFpWUXVBS" 1 => "askhelpdesk_session=eyJpdiI6ImVLRTJXSmpXQVcxRXNBczRHdlByR1E9PSIsInZhbHVlIjoiZTlPTCtZQ1hlSmxpOHBoRnpuL05xUThBcjVHakZWUHlwbnJ6Yi9LT0gvOWlBU05HeDE3TnJXaVhzR2xMOHg1MHdZTDVvRXoyaXJzLzBDUzBBUllGN3N3OGhQTmh5cTdPby91L0kvMEx3YmQ3YkR3RVphZXhYZlJLVDB5YzBPVDUiLCJtYWMiOiIzZWIwNDg1NjU4ZjgxYjZhMjQ5NDE2NjViZmNlMGFjYjlhODkwYjg2MjQzNzY2YTE5N2ViNDZmNzViNDQyMWMwIiwidGFnIjoiIn0%3D; expires=Thu, 12-Jun-2025 11:45:29 GMT; path=/; httponlyaskhelpdesk_session=eyJpdiI6ImVLRTJXSmpXQVcxRXNBczRHdlByR1E9PSIsInZhbHVlIjoiZTlPTCtZQ1hlSmxpOHBoRnpuL05xUThBcjVHakZWUHlwbnJ6Yi9LT0gvOWlBU05HeDE3TnJXaVhzR2xMOHg1" ] ]
        session_attributes
        0 of 0
        array:4 [ "_token" => "uvWe9vK8wIJ0uiuMJPDYOkROsSer2fbuCCHIpWWB" "_previous" => array:1 [ "url" => "https://receivinghelpdesk.com/ask/how-do-you-change-a-belt-on-a-yard-machine-edger" ] "_flash" => array:2 [ "old" => [] "new" => [] ] "PHPDEBUGBAR_STACK_DATA" => [] ]