Woodguard can be applied with a low-pressure or “pump-up” sprayer. When applying Woodguard with a sprayer, make sure that the nozzle it set to deliver a low-pressure, coarse spray. Woodguard covers approximately 200 sq. ft/gal. on smooth wood. Woodguard stain should be applied to the point of refusal.
How do I apply woodguard?
For best results, apply WOODguard when no rain is expected for at least 24 hours, the overnight low temperature is above 50°F/10°C and the daytime high temperature is below 95°F/35°C. You can use a regular paint brush or roller, but the fastest way to apply WOODguard is with a backpack pump-up sprayer. Do not use an airless paint sprayer.
When can I apply woodguard over stain?
Hi Chris, we recommend waiting to apply WOODguard until the wood’s moisture content is below 18%. With a higher moisture content, the wood won’t absorb the oil well and it will shorten the stain’s expected life span.
How do I contact woodguard stain experts?
If you have any questions or concerns, please leave us a comment below or give us a call at 1-800-524-1093 to speak with a WOODguard stain expert.
How do you apply stain evenly to wood?
1 Check the weather forecast to make sure that the weather will be dry for several days. ... 2 Use a roller, brush, or hand-pump sprayer to apply stain evenly. ... 3 Follow all manufacturer’s instructions regarding the removal of excess stain, or the application of a second coat.
How do you use WOODguard?
1:593:35How to Apply WOODguard: The #1 Wood Preservative - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe fastest way to apply wood guard is with a backpack or pump up sprayer. Apply a single coat toMoreThe fastest way to apply wood guard is with a backpack or pump up sprayer. Apply a single coat to the point of refusal. Do not be afraid to apply the wood guard very heavily. It has no drying agents.
How long does it take for WOODguard stain to dry?
If the pH is greater than that of the rinse water, additional rinsing is necessary. Proper rinsing is a very important step. 6. Let surface dry completely (moisture content below 18%) – usually after 3 days.
What is wood guard?
WoodGuard is a unique patented engineered lumber product by Woodgrain. With a pine wood core and a polymer plastic coated exterior, WoodGuard is the only product of its kind. WoodGuard is engineered for exterior use to stand up against the wear and tear of mother nature.
Who makes WOODguard stain?
ISK BiocidesTwo years later he found WOODguard, an EPA-registered wood preservative and stain (now manufactured by ISK Biocides).
How dry should wood be before staining?
24-48 hoursNo matter the type of wood, we always recommend waiting 24-48 hours after rainfall or cleaning to make sure the structure is dry prior to staining.
How long after staining deck can you walk on it?
In most cases a full body stain or aryllic deck finish will be dry to touch within an hour in dry, hot weather. After two hours you could take a chance and walk on it with shoes, though I'd recommend barefoot. After about 4 hours you should be able to safely walk on your deck.
How do you apply Carbolineum?
Suitable as supplied for application by brush, spray or dip. advisable to stand ends in CARBOLINEUM WOOD PRESERVER for several days to ensure maximum impregnation. Wash equipment with MINERAL TURPENTINE (AZH 1) immediately after use. Do not apply to surfaces that come into direct contact with food or feedstuffs.
How do you spray wood preservatives?
0:415:13Staining a Fence with a sprayer - YouTubeYouTubeStart of suggested clipEnd of suggested clipAfter hosing down the fence I filled my paint sprayer halfway up with some water and fill the otherMoreAfter hosing down the fence I filled my paint sprayer halfway up with some water and fill the other half of this wood cleaner I'll leave a link to the cleaner I use down below I figured.
How do you keep bugs out of wood?
Here are 6 effective tips to protect wood from the dreaded attack of termitesUse only high-quality BWR grade plywood. ... Apply anti-termite chemicals. ... Protect from moisture: ... Prevent contact of furniture with soil. ... Pest control. ... Termite-resistant polish. ... Home remedies.
How long does Armstrong Clark stain last?
3-4 yearsArmstrong Clark deck stains are designed to be usable for a long time so long as they are stored correctly. Unopened containers of Armstrong stains - just like regular paint - have a shelf-life of up to 3-4 years as long as they are stored in a temperature controlled room.
What is polymer coating on wood?
Polymer coated wood is incredibly tough. Your treated wood is coated with a durable polymer membrane that bonds to wood, preventing destruction from marine borers, dry rot, and termites. It also resists harmful UV rays and the effects of freezing.
How to mix woodguard exterior?
Mixing Instructions: WOODguard Exterior should be mixed thoroughly, making sure that all ingredients have been removed from the bottom of the container. For the 5-gallon bucket, we recommend using a drill mixer like the Hyde Stir Whip that can reach and scrape the entire bottom of the bucket. If using a mixer, attach to an electric drill ...
How many feet does a gallon of woodguard cover?
1 gallon covers 150-300 ft² on new wood and 75-100 ft² on weathered wood. WOODguard Exterior should be mixed thoroughly, making sure that all ingredients have been removed from the bottom of the container.
Can you spray woodguard with airless sprayer?
Hi Edward, the manufacturer doesn't recommend using an airless sprayer because at high pressures the WOODguard will be atomized and is harder to contain. WOODguard will kill bushes and shrubs that it gets on & you also don't want to be breathing atomized WOODguard.
How to apply wood guard?
Woodguard can be applied with a low-pressure or “pump-up” sprayer. When applying Woodguard with a sprayer, make sure that the nozzle it set to deliver a low-pressure, coarse spray. Woodguard covers approximately 200 sq. ft/gal. on smooth wood. Woodguard stain should be applied to the point of refusal.
How long does it take to sand wood before applying wood guard?
Usually after 3 days, sand with a fine grit paper to remove “fuzz” formed from scrubbing action of the scrub brush. • Before applying WoodGuard, ensure that the surface is clean and the wood is free of mill glaze and dry to <18% moisture content.
What is wood guard?
WOODguard. WOODguard is a one-coat, oil-based, penetrating semi-transparent wood preservative that is also an excellent water repellent. Woodguard is an exterior wood finish suited for log homes, rough-sawn siding, fences, and wood roofs. Woodguard uses Copper 8 Quinolinolate, which is a preservative that is approved for use on food containers ...
What is woodguard copper 8?
Woodguard uses Copper 8 Quinolinolate, which is a preservative that is approved for use on food containers and is also an EPA registered wood preservative. It controls fungus, wood decay, mold, termites, and powder post beetles. Woodguard also protects against cupping, curling, and warping. Honey 2000 is a cross between Honey Base ...
What is the best way to paint rough surfaces?
Method: Brush: A regular paint brush is fine for most surfaces. For uneven or rough surfaces, use a stiff-bristle brush. Roller: Use a long nap for rough surfaces. Spray: Low-pressure spray or “pump up spray” equipment is suitable. Set nozzle to deliver a low pressure, coarse spray. Do not use airless spray equipment.
Can you use airless spray on wood?
Do not use airless spray equipment. For all methods, apply to point of refusal. Before applying Woodguard, ensure that the surface is clean and the wood is free of mill glaze and dry to <18% moisture content. If the wood has been treated with another product, it must be removed with a chemical wash.
What is the best way to remove oil based stain?
Solvent/Wood Stain Remover. Solvents (paint thinner, wood stain remover, mineral spirits) are always a good thing to have around when you're painting. Staining and painting is a messy job, and you'll need more than water to clean things up afterwards,especially when working with oil-based stains.
What is the best way to sand wood?
Palm sander/orbital sander. Use a palm sander or air sander for super quick preparation. Just be careful not to over-sand the surface when using electric or air-powered sanders. Belt sander. A belt sander will help you in situations where the wood is extremely coarse.
Why do you need to stain a soft wood?
Softwoods will generally require more stain because it will absorb more profoundly into the pores. You can avoid this by sanding softer woods with 220-grit sandpaper. After the first coat of stain/varnish is dry according to the time recommended on the container, you may or may not want to apply a second coat of stain.
Can you use a paint sprayer on stain?
We highly recommend using a paint sprayer on larger stain projects because they are increasingly more affordable, and they make short work out of larger spaces. Check out our recommendations of the best paint sprayers where we've recommended high-end, low budget, and most popular options for paint sprayers.
Can you stain wood with a cloth?
One difference, for example, is that some wood finish (traditional oil-based stains) can be easily applied to a surface by using a cloth.
Can you use clear lacquer on wood?
You can even apply a clear lacquer to some wood projects for a good sealant, but be sure to do your research to make sure lacquer is compatible with the specific stain and wood type. Sanding with high-grit sandpaper is always an option after applying the polyurethane coating.
What is the phone number for Waterguard?
We are here to further discuss and provide solutions, so please give us a call at 1-800-426-6306 between 8am-5pm ET.
What is UV protection on wood?
SunBlock ® UV defense to shield your wood surface from the fading power of the sun. Provides a mildew resistant coating that helps prevent mold stains. Penetrates the surface for deep, lasting protection. Simple cleanup with just soap and water. Read more.
Does Olympic Waterguard work?
Olympic Waterguard did NOT work. We are extremely disappointed with this sealer and would not recommend it. Olympic Waterguard wood sealer was applied to our deck to seal it after it was cleaned and dried, but rain water has soaked through the wood as if no sealer was ever applied.
Prepare the Wood for Stain
Before starting your stain project, lay a tarp or drop cloth out to catch any excess stain. Do not allow clean-up water, combined with stain, to escape through a storm drain or sewer. Next, prepare the wood by cleaning and sanding as needed. Allow the wood to dry completely before staining.
Mix Stain and Test Colors
Following manufacturer's instructions, mix stain as directed. Apply a small amount in an inconspicuous area to test the color and let dry. For consistency in color, be sure to have all stain mixed in the same container. For example, if you need to apply three gallons of stain, mix the three gallons together in a five-gallon bucket before use.
Apply Stain
Check the weekly forecast to make sure that the weather will be dry for several days. The manufacturer's instructions will specify the amount of time required for the stain to dry properly.
Tips for Staining Wood
When applying stain, there are a few simple tips you can follow to make your project look better:
Clean Up
Depending on the type of stain you've used, the manufacturer will specify whether clean-up requires soap and water, mineral spirits, chemicals or otherwise. Typically, soap and water is used for water-based paints and stains, whereas mineral spirits is used to clean up oil-based paints and stains.
Exterior Stain Maintenance
Clean wood on a regular basis to remove all dirt, pollen or soot. Wash the surface gently to avoid damaging the stain.
