How do you apply StoneTech BulletProof sealer?
- Ensure cap is closed and sealed and shake well before use.
- Mask off surfaces not intended to be treated.
- Liberally apply an even coat of STONETECH BulletProof Sealer using a paint pad, roller, brush or low-pressure sprayer.
- Allow sealer to penetrate the surface for 10-15 minutes.
Full Answer
What is stonetech bulletproof sealer?
This premium sealer offers the best protection on the most porous natural stone, tile, masonry and grout surfaces in interior and exterior applications. Built with Microban® antimicrobial protection, STONETECH BulletProof Sealer continuously inhibits the growth of stain and odor causing bacteria, mold and mildew on surfaces.
Can bulletproof sealer be used on marble?
Dupont Stonetech Bulletproof Sealer can be used on several substrates including honed and textured marble, granite, travertine, limestone, bluestone, Saltillo, quartzite, and flagstone. Any homeowner who has used these stones will tell you that yes they are beautiful, but they aren’t cheap.
How many square feet will a quart of bulletproof sealer cover?
One quart of Dupont Stonetech Bulletproof Sealer can seal up to 225 square feet for one application. On the other hand, a gallon can seal 900 square feet with one application. Isn’t Dupont Stonetech Bulletproof Stone Sealer so cost-effective?
How do I seal my natural stone countertops?
It’s also really easy to apply – all you need to do is give your countertop a good cleaning, apply the sealer, wait for it to activate, and then wipe off the excess. What’s more, you can have peace of mind knowing that this sealer won’t change the look of your natural stone investments.
How do you use Dupont Stonetech sealer?
Liberally apply an even coat of STONETECH® BulletProof Sealer using a paint pad, roller, brush or low-pressure sprayer. 4. Allow sealer to penetrate the surface for 10-15 minutes. During this time, keep the surface wet with sealer, adding more sealer as needed.
How do you apply Stonetech marble sealer?
No matter which method is used to apply the STONETECH BulletProof Sealer the correct application is a thin, wet film of sealer on the surface of the stone. Allow sealer to penetrate the surface for 10–15 minutes. During this time, keep the surface wet with sealer, adding more sealer as needed.
How do you apply Stonetech BulletProof sealer to grout?
2:124:36How to Seal Your Grout with StoneTech HD Grout Sealer against ...YouTubeStart of suggested clipEnd of suggested clipLiberally apply grout sealer to grout lines with a paintbrush narrow paint roller or with a sprayMoreLiberally apply grout sealer to grout lines with a paintbrush narrow paint roller or with a spray version available in a 24 ounce spray.
How do you seal granite with Stonetech?
5:176:40How to Seal a Granite Countertop with STONETECH® BulletProof® SealerYouTubeStart of suggested clipEnd of suggested clipYou might have to use a nylon brush. Or you might have to strip it with our cleanse all and thenMoreYou might have to use a nylon brush. Or you might have to strip it with our cleanse all and then reapply. It. And that's all there is to it. So now I'm gonna wait 30 minutes to apply the second coat.
How do you apply sealer?
0:393:36How To Apply Concrete Sealer To A Smooth Surface www ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipWorking the sealer evenly. Through the whole area we like to work in areas that are approximatelyMoreWorking the sealer evenly. Through the whole area we like to work in areas that are approximately three feet wide. By about ten feet long this will allow if you have good control in the application.
How do you use penetrating sealer?
1:457:28How To Seal Concrete: Natural-Finish Penetrating Sealer - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you want to apply two coats of wet on wet. So basically what that means is that you apply yourMoreSo you want to apply two coats of wet on wet. So basically what that means is that you apply your first coat. And before your first coat fully dries you want to go ahead and get a second coat on.
How many coats of grout sealer is needed?
(Generally speaking, it takes one to three coats of sealer to achieve adequate protection.) After the second coat dries, test the surface with a few drops of water. The liquid should bead up into droplets; if not, apply a third coat to ensure quality results. Finally, let your tiled space dry completely.
What happens if grout sealer dries on tile?
If it dries up on the tiles, then a thin film of haze is formed on the tile surface. As a result, the tile loses its shine and beauty. Grout sealer removal is important to retain the attractive look of the tiles.
How long should grout sealer dry before showering?
Once you have applied all the coats of sealer that are required you need to let the area completely dry. Some alternative sealers will need as long as 24 hours to set whilst others need a full 48 hours.
Can StoneTech BulletProof sealer be used on grout?
STONETECH® BulletProof® Sealer is a water-based penetrating sealer that provides maximum stain and antimicrobial product protection while preserving the natural look of the surface. It can be used as a grout sealer, tile sealer, masonry sealer and in many other applications.
How do you remove bullet proof sealer?
How can this be removed? Within 24 hours of application, test reapplying the sealer and scrubbing with a nylon brush. After 2-3 minutes of agitation, wipe the surface clean and dry. For stubborn residues, or if more than 24 hours has past, a solvent will be necessary.
How do you remove sealer from granite?
You can try scrubbing with 0000 steel wool. If not very effective, then try washing with acetone (let is sit for a bit.... won't harm the granite at all) and then scrub with a nylon pad. If acetone doesn't work, then you'll have to wash with a more potent solvent like methylene chloride.
What is bulletproof sealer?
STONETECH® BulletProof® Sealer is a water-based penetrating sealer that provides maximum stain and antimicrobial product protection while preserving the natural look of the surface. It can be used as a grout sealer, tile sealer, masonry sealer and in many other applications. This premium sealer offers the best protection on the most porous natural stone, tile, masonry and grout surfaces in interior and exterior applications.
What is a breathable sealer?
Breathable, penetrating sealer preserves the original look of the surface. Water-based formula - Better for you and the environment. Low odor, non-flammable and weather resistant - For interior and exterior use. Professional grade for quality protection every time.
