Make sure your surface is cleaned and prepped before applying the waterproofer. After the surface is cleaned and prepped, apply the BEHR PREMIUM ® Protector and Waterproofer until the surface is saturated. Apply the product to a dry surface with a brush, roller or garden sprayer.
Full Answer
How do you use Behr premium sealant?
After the surface is cleaned and prepped, apply the BEHR PREMIUM ® Protector and Waterproofer until the surface is saturated. Apply the product to a dry surface with a brush, roller or garden sprayer. TIP: The spread rate is 250 sq. ft per gallon.
Why choose Behr semi transparent deck stain?
Behr Semi Transparent Deck Stain has been around for decades and homeowners love it because of its’ reasonable price, great look, and easy application. It also offers great water proofing and wood protection without being too slippery when wet.
Can you use Behr stain on wood?
Use a product such as BEHR PREMIUM® NO. 64 Wood Stain & Finish Stripper to remove loose wood fibers, latex, oil-based and 100% acrylic coatings on new or weathered wood. BEHR PREMIUM® NO. 63 All-In-One Wood Cleaner MUST be used following NO. 64 to clean, brighten & neutralize wood.
How do you remove stain from Behr decking?
Removing deck stain is not an easy task. Power washing and sanding are great ways to remove existing deck stain. Behr also makes a chemical stain stripper called Behr Wood Stain and Finish Stripper.
How do you apply Behr semi-transparent stain and sealer?
Work in small sections lightly saturating the surface and immediately back-brush or use pad applicator to eliminate puddling, remove excess and evenly distribute the stain. Maintain a wet edge when applying. Apply product end-to-end or to board lengths to prevent lap marks.
How do you apply Behr semi-transparent stain to deck?
0:030:52BEHR® Paint | How to Apply Stain - YouTubeYouTubeStart of suggested clipEnd of suggested clipApply the stain evenly in the direction of the grain. Two or three boards at a time moving from endMoreApply the stain evenly in the direction of the grain. Two or three boards at a time moving from end to end we know this seems obvious.
How do you apply Behr deck sealer?
0:321:32BEHR Stain & Finish Project How To's: Decks - YouTubeYouTubeStart of suggested clipEnd of suggested clipApplication apply to vertical areas first being careful not to drip onto horizontal. Areas work withMoreApplication apply to vertical areas first being careful not to drip onto horizontal. Areas work with the entire board length.
How do you apply Behr outdoor stain?
0:241:32BEHR® Paint | How to Stain a Deck - YouTubeYouTubeStart of suggested clipEnd of suggested clipThey need to be stained as well give the stain one to two hours to dry before you apply your secondMoreThey need to be stained as well give the stain one to two hours to dry before you apply your second coat the second coat is important because it will help keep colors as rich as possible.
How many coats of stain should Behr deck?
Over application of stain will lead to surface failure including peeling and cracking. Avoid applying stain too heavily. Two thin coats required.
How long does Behr semi transparent stain need to dry before rain?
Do not use if rain is expected within 24 hours. The wood surface must be completely dry before application. Intermix multiple containers to ensure color uniformity.
Should I use a brush or roller to stain my deck?
Deck stains can be applied in several different ways. Using a pump-up garden sprayer and roller are two popular methods. Regardless of how you apply your wood stain, keep a paint brush at hand. A paint brush will work the stain deep in to the pores of a board.
How do you apply Behr water based wood stain?
Apply stain in the direction of the grain with a brush or clean cloth.Allow the stain to penetrate 5-10 minutes to achieve the desired colour.The more time the stain is allowed to penetrate, the richer and darker the colour will be.Remove stain that has not absorbed into the wood with a clean cloth.More items...
How long does Behr waterproofing stain and sealer last?
BEHR PREMIUM® Solid Colour Waterproofing Stain & Sealer. Protect and beautify with BEHR PREMIUM Solid Colour Weatherproofing All-In-One Wood Stain & Sealer. This 100% acrylic formula seals out the elements, and the sun's harmful UV rays, for up to 10 yrs. on decks and up to 25 yrs.
How long should Behr stain dry between coats?
From my experience, Behr Deck Stain is typically dry to the touch in about 30 minutes. It typically needs 1-2 two hours before you can re-coat and 72 hours before full traffic on your deck may resume.
How long does it take for Behr waterproofing stain and sealer to dry?
1-2 hours before recoat. Wait 24-48 hours before light foot traffic. 72 hours for full cure.
How long does it take for semi transparent stain to dry?
Approximately 24–48 hours depending on temperature and humidity. The appearance of the finish will vary depending on the porosity and color of the wood surface. To ensure desired appearance and proper drying time, always finish a small test area before proceeding.
How long is Behr Process Corporation warranty?
Behr Process Corporation warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for 8 years on vertical surfaces and 6 years on horizontal surfaces, from the date of purchase. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. Color fading and slight natural graying of the wood may occur during the warranty period, especially in areas exposed to heavy foot traffic or excessive weather. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. To obtain warranty service, call 1-800-854-0133. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.
How to prevent lap marks on wood?
Apply product end-to-end or to board lengths to prevent lap marks. Over application of stain will lead to surface failure including peeling and cracking. Avoid applying stain too heavily. For optimum performance, coat all six sides of wood.
How to get rid of lap marks on board?
Maintain a wet edge when applying. Apply product end-to-end or to board lengths to prevent lap marks.
How long does it take for waterproofing to cure?
On vertical surfaces, apply the waterproofer from the bottom up and saturate thoroughly. TIP: The Proterctor and Waterproofer will cure within 24-48 hrs. Step 4. Once dried, rough, vertical surface may be coated with an oil or latex-based paint or primer. DO NOT paint horizontal surfaces after applying this product.
How to use a sanitizer?
Step 2. Remove any puddles by spreading product to drier areas or by wiping off excess with a clean cloth. Step 3.
What is a Behr stain?
Behr Deck Over is a solid deck stain that goes on incredibly thick and is only meant for covering up decks where the wood is in terrible shape. Deck over will completely hide the wood grain along with imperfecitons on your deck such as cracks, splinters, knots, and gaps.
How long does it take for Behr deck stain to dry?
How Long Does Behr Deck Stain Take To Dry. From my experience, Behr Deck Stain is typically dry to the touch in about 30 minutes. It typically needs 1-2 two hours before you can re-coat and 72 hours before full traffic on your deck may resume.
What does it mean when a deck stain is peeling?
Many deck stains will start to peel or wear very unevenly. Peeling means that it never absorbed into the wood and when you apply your new stain, it will look blotchy and uneven.
How do I remove stain from a deck?
Power washing and sanding are great ways to remove existing deck stain. Behr also makes a chemical stain stripper called Behr Wood Stain and Finish Stripper. Personally, I like to power wash, then sand the deck with a random orbital sander and finish using Wood Stain and Finish Stripper if needed.
Is it hard to stain a deck?
Staining a deck is one of the most satisfying DIY projects, and it’s not hard to do if you’re willing to put in the time. The key is picking the right product – because there are many types of stains out there! Behr Semi Transparent Deck Stain has been around for decades and homeowners love it because of its’ reasonable price, great look, ...
Can you use semi transparent stain on a deck?
Most deck staining projects I do are with sem transparent stain. If done right, you can keep a deck in great shape using semi-transparent stain for many years.
Can you use solid stain on a deck?
I recommend using solid deck stain when your old stain is blotchy and uneven, but the wood is still in good shape.