How do you apply Behr concrete bonding primer?
- Apply when air and surface temperatures are between 50-90°F (10-32°C).
- Use a high quality 3/8-1/2" nap roller cover on smooth surfaces or 1/2-3/4" nap roller cover on semi-rough or porous surfaces, nylon/polyester brush or an airless sprayer (.
- Stir primer occasionally.
Full Answer
How do I use Behr bonding primer?
While BEHR Bonding Primer is formulated to adhere without sanding, it is recommended that a small area be tested for adhesion prior to beginning the job. Remove loose paint, wash off chalk, dirt and grease with detergent, rinse well and allow to dry. Remove mildew stains with a mildew stain removing product.
What is the best way to apply primer to concrete?
For proper penetration and adhesion of primer, use a concrete & masonry cleaner & etcher product. DO NOT THIN. Stir primer thoroughly before and occasionally during application.
Which bonding primer should I use?
For painting projects that involve “tough-to-paint” Interior/Exterior surfaces, choose BEHR ® Bonding Primer. It is specially formulated to bond to a variety of challenging substrates and reduces the need for sanding dense and glossy surfaces – making it an ideal primer choice for painting tile, glass, Kynar ®, and vinyl.
How long does it take for Behr primer to dry?
Apply BEHR PREMIUM ® Concrete & Masonry Bonding Primer to the surface. This product will enhance the adhesion of the topcoat to the surface. The bonding primer will dry to the touch in approximately 2 hours. Allow for longer dry times in cooler temperatures and higher humidity.
How do you apply concrete bonding primer?
1:152:33Primercoat Application - Applying the Primer Coat on Your ConcreteYouTubeStart of suggested clipEnd of suggested clipAfter the material is thoroughly mixed use a brush or small roller to cut in along the walls ofMoreAfter the material is thoroughly mixed use a brush or small roller to cut in along the walls of expansion joints and hard-to-reach. Areas prior to painting.
How long does it take Behr bonding primer to dry?
24 hoursIf using as a primer for epoxies, lacquers, products containing xylene or other hot solvents, allow to dry for 24 hours before topcoating; test for compatibility in a discrete area first before full coat application. Not recommended for floors or horizontal surfaces subject to prolonged water contact.
How long does it take for concrete bonding primer to dry?
Bonding primer is great for porous surfaces, like concrete or brick. If you apply paint directly to concrete, it may flake or wash off. However, if you use a bonding primer, it will seal the surface, and bond to the paint when it is applied. Bonding primer will dry in 1-24 hours, depending on the environment.
How long does Behr concrete primer take to dry?
Dry Time: @ 77° & 50% RH Longer dry time may be required in cooler temperatures and higher humidity. To Touch:2 hours To Recoat: 4 hours Must be top coated after at least 8 hours and no longer than 30 days or the Primer will remain tacky until topcoat is applied.
Do you sand after bonding primer?
Since this product can stick to glossy surfaces, it is not absolutely necessary to sand them.
Do I need a bonding primer on concrete?
Concrete isn't usually a good substrate for holding coatings because of its high porosity and alkalinity. “Without it (bonding primer), there's nothing for the coating to grab onto,” says Pachade. If the concrete substrate is not primed, “You'll see pinholes because the concrete is breathing.”
Do you have to paint over bonding primer?
PUT ON YOUR COAT “Although the topcoat may be applied anytime after the bonding primer coat is applied, we recommend you topcoat within a week after priming for best adhesion results,” says Brendan Steidle, brand manager for Primers and Specialty Coatings at Rust-Oleum.
Can I paint over bonding primer?
Tips applying Valspar Bonding Primer: It only takes one coat and can be painted over in one hour. Primer isn't meant to cover, but coat so you will see the surface below it.
How much concrete primer do I need?
Primer typically dries in two to eight hours. Usually, one coat of primer is enough to prepare it for painting, but if you are painting over another color, two coats will provide a better finish for your concrete floor.
What is a bonding primer?
Valspar® Professional Bonding Primer is a high quality latex primer designed for the professional painter. This low odor/low VOC primer has excellent adhesion over glossy surfaces, drywall, cured plaster, masonry, wood, galvanized metal and aluminum.
Can you paint directly on concrete?
Yes, you definitely can paint your concrete surface. Painting concrete requires you to follow the proper preparation and application guidelines. Also, choosing the right kind of concrete paint or concrete stain would depend on the surface you're working on.
Does concrete primer dry clear?
OVERVIEW. Valspar® concrete bonding Primer rolls on white and dries to a smooth, clear finish —paving the way for a strong and Flawless base coat.
How to contact Behr Process Corporation?
This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. To obtain warranty service, call 1-800-854-0133. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.
What is water based primer?
This high-performance water-based primer will promote a uniform topcoat finish and create a strong adhesion between the coating and surface. It is highly recommended for surfaces subject to high foot traffic or automotive vehicle tires. This primer can be used on uncoated or previously coated surfaces.
How long does Behr warrant?
For one year from the date of purchase, Behr Process Corporation warrants to the original consumer purchaser, (1) that the product meets Behr Process Corporation’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications.
How long does concrete need to cure before priming?
New concrete must cure for a minimum of 30 days prior to priming. Patch all holes and cracks and allow to dry. For touch-ups where surface coatings have failed, completely remove all loose or peeling paint. Use a paint stripper to remove any previous coatings or sealers.
How to get rid of residue on a sandpaper surface?
If residue is found, rinse the surface to remove residue. Allow the surface to dry completely. Sprinkle a few drops of water onto the surface. If water is quickly absorbed and the surface feels like 150 grit sandpaper, the surface is ready. If not, re-etch.
What is BEHR bonding primer?
For painting projects that involve “tough-to-paint” Interior/Exterior surfaces, choose BEHR ® Bonding Primer. It is specially formulated to bond to a variety of challenging substrates and reduces the need for sanding dense and glossy surfaces – making it an ideal primer choice for painting tile, glass, Kynar ®, and vinyl. This water-based formula has a quick dry time and can be used under Alkyd, Oil, and Water-based topcoats.
How long does it take for a primer to dry?
If using as a primer for epoxies, lacquers, products containing xylene or other hot solvents, allow to dry for 24 hours before topcoating; test for compatibility in a discrete area first before full coat application. Not recommended for floors or horizontal surfaces subject to prolonged water contact.
How long is Behr Process Corporation warranty?
WARRANTY. For one year from the date of purchase, Behr Process Corporation warrants to the original consumer purchaser, (1) that the product meets Behr Process Corporation’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications.
How long does Behr warranty last?
For one year from the date of purchase, Behr Process Corporation warrants to the original consumer purchaser, (1) that the product meets Behr Process Corporation’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. To obtain warranty service, call 1-800-854-0133. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.
How to bond concrete with primer?
Step 1. Once the surface is cleaned and etched, it is ready for the bonding primer. Apply the bonding primer using a high-quality pump sprayer, 1/4 - 3/8" nap roller cover, a nylon-polyester brush, or pad applicator. Step 2. Apply BEHR PREMIUM ® Concrete & Masonry Bonding Primer to the surface. This product will enhance the adhesion ...
How long does it take for a gal of primer to dry?
TIP: 1 gal will cover approximately 350-500 sq. ft. Step 3. The bonding primer will dry to the touch in approximately 2 hours. Allow for longer dry times in cooler temperatures and higher humidity. Apply a topcoat after at least 4 hours but before 30 days.
How long does concrete need to cure before floor treatment?
Before you start, make sure you wipe up any oil/grease spills and scrape and sweep away any dirt or loose contaminants.#N#New concrete must cure for 30 days before you can apply any floor treatment.
Where is Behr Process located?
To obtain warranty service, call 1-800-854-0133 ext. 2, or contact Behr Process Corporation at 2750 Centre Avenue N.E., Calgary, AB T2A2L3. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty. Read Warranty Information.
How long does concrete need to cure before priming?
New concrete must cure for a minimum of 30 days prior to priming. Patch all holes and cracks and allow to dry. For touch-ups where surface coatings have failed, completely remove any loose or peeling paint. Do not apply over previously coated surfaces.
How long does Behr warrant?
For one year from the date of purchase, Behr Process Corporation warrants to the original consumer purchaser, (1) that the product meets Behr Process Corporation’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications.
What is BEHR prime?
For a long-lasting durable finish, use BEHR PREMIUM Concrete & Masonry Bonding Primer. This high-performance water-based primer will promote a uniform topcoat finish and create a stronger adhesion between the coating and surface. It is easy to apply and dries clear.
How long does concrete need to cure before priming?
New concrete must cure for a minimum of 30 days prior to priming. Patch all holes and cracks and allow to dry. For touch-ups where surface coatings have failed, completely remove any loose or peeling paint. Do not apply over previously coated surfaces.
How long does Behr warrant?
For one year from the date of purchase, Behr Process Corporation warrants to the original consumer purchaser, (1) that the product meets Behr Process Corporation’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications.
How to contact Behr Process Corporation?
This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. To obtain warranty service, call 1-800-854-0133. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.
How long does it take for a primer to dry?
If using as a primer for epoxies, lacquers, products containing xylene or other hot solvents, allow to dry for 24 hours before topcoating; test for compatibility in a discrete area first before full coat application. Not recommended for floors or horizontal surfaces subject to prolonged water contact.
How to apply a sanitizer?
Application#N#Blank space if empty. 1 Apply when air and surface temperatures are between 50-90°F (10-32°C). 2 Use a high quality 3/8-1/2" nap roller cover on smooth surfaces or 1/2-3/4" nap roller cover on semi-rough or porous surfaces, nylon/polyester brush or an airless sprayer (.015"-.021" spray tip, 60 mesh filter). 3 Stir primer occasionally. 4 Do not thin if using a roller or brush; however, if using a sprayer and thinning is requried, thin with water at a rate of no more than 1/2 pint per gallon. 5 Topcoat within 14 days.
How long does Behr warrant?
For one year from the date of purchase, Behr Process Corporation warrants to the original consumer purchaser, (1) that the product meets Behr Process Corporation’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications.
How to remove rust from a paint job?
Remove loose paint, wash off chalk, dirt and grease with detergent, rinse well and allow to dry. Remove mildew stains with a mildew stain removing product. Remove all dust with a damp cloth, allow to dry. Remove loose rust, peeling paint and mill scale with a scraper, wire brush or sandpaper.
Can you use BEHR bonding primer without sanding?
While BEHR Bonding Primer is formulated to adhere without sanding, it is recommended that a small area be tested for adhesion prior to beginning the job. Remove loose paint, wash off chalk, dirt and grease with detergent, rinse well and allow to dry.
What is bonding primer used for?
Decorative concrete work done at a 22,000-square-foot Heinen’s Supermarket in the Cleveland area. Bonding primers were used to help concrete adhere to ceramic tile. Bonding primers serve two purposes when applied to concrete before topcoating, according to Victor Pachade, ...
Why do I see pinholes in concrete?
If the concrete substrate is not primed, “You’ll see pinholes because the concrete is breathing.”. You will have even more problems if you’re topcoating over old concrete. The substrate might well be dry and crumbly, causing the surface to flake and take the new coat with it. The solution is a layer of bonding primer that provides benefits ...
Can you use primer on concrete?
Bonding primers serve two purposes when applied to concrete before topcoating, according to Victor Pachade, national sales manager for Smart Surface Technology, manufacturer of Colormaker products. “They seal the concrete surface and develop a bond line for a coating or topping to bond to the substrate.”. Concrete isn’t usually a good substrate ...
Is concrete good for coating?
Concrete isn’t usually a good substrate for holding coatings because of its high porosity and alkalinity. “Without it (bonding primer), there’s nothing for the coating to grab onto,” says Pachade. If the concrete substrate is not primed, “You’ll see pinholes because the concrete is breathing.”. You will have even more problems if you’re topcoating ...
Can you gouge concrete with a grinder?
You can accomplish that with a hand-held grinder outfitted with a 7″ cup-wheel. Just be careful not to gouge your concrete surface. Make sure you’re holding the grinder flat on the surface and that it’s always in motion, not holding it in one place.
Is it safe to use gel tek on concrete?
Once your surface is clean, we recommend using Surface Gel Tek’s ( gelled acid) which is completely safe to touch and 100 percent biodegradable (will not contaminate soil or hurt plants). This product properly etches the concrete surface, creating an acceptable profile for the adhesion of your new coating.
Can you use acrylic primer on urethane?
Often, acrylic primers are used before applying a urethane topcoat. “Urethanes don’t like the alkalinity of the concrete, so they repel it,” says Pachade. It’s also wise to go with an acrylic primer when applying it to an exterior surface.
