How do you adjust the throttle cable on a Suzuki outboard?
- Loosen the throttle cable adjuster jam-nut with the wrenches.
- Push the control lever forward to the "Forward idle" position.
- Pull the control lever back, through neutral, into the reverse idle position.
- Push the throttle to the "Full forward" position.
How do you adjust the throttle on an outboard motor?
Get a helper to push the throttle lever forward all the way and open the motor side up by hand, then tighten down the adjustment screw, then return it to neutral and make sure the throttle on the motor has relaxed all the way down to its resting position. Click to see full answer. Moreover, how do you adjust the throttle cable on an outboard motor?
How do you adjust the throttle cable on a gearbox?
Move the cable to a lower hole on the control if the lever travel is insufficient to reach full throttle. Tighten the jam-nut on the throttle cable with the wrenches. Adjust the gearbox control cable. Place the control lever in the neutral position. Loosen the jam-nut on the cable adjuster with the wrenches.
How do you tighten the throttle cable on a Honda Accord?
Tighten the jam-nut on the throttle cable with the wrenches. Adjust the gearbox control cable. Place the control lever in the neutral position. Loosen the jam-nut on the cable adjuster with the wrenches.
How do you maintain the throttle cable on a motorcycle?
Cables require periodic maintenance in the form of lubrication and replacement due to wear with heavy use. Loosen the throttle cable adjuster jam-nut with the wrenches.
How do you tighten the throttle on a Suzuki outboard?
0:180:48Tightening the Throttle Cable with Mike G. - YouTubeYouTubeStart of suggested clipEnd of suggested clipSide your screwdriver in there give it a couple turns. And that'll put tension on the cables and itMoreSide your screwdriver in there give it a couple turns. And that'll put tension on the cables and it will hold the throttle from falling back.
How do you adjust throttle cable tension?
1:503:33How To Adjust Your Motorcycle Throttle Cable | MC GarageYouTubeStart of suggested clipEnd of suggested clipFirst slide the rubber cover off the inline adjust. Then crack the lock nut free and turn theMoreFirst slide the rubber cover off the inline adjust. Then crack the lock nut free and turn the adjuster to achieve that two to three millimeters of free play yep.
How do you adjust an outboard throttle link?
8:2813:45How to Link & Sync a Yamaha Outboard 40hp 2 stroke - YouTubeYouTubeStart of suggested clipEnd of suggested clipRight here you can see me on it this is on the bottom carb the throttle control to loosen that screwMoreRight here you can see me on it this is on the bottom carb the throttle control to loosen that screw. You want to turn clockwise. Now if you notice there's a stop.
How do I adjust my outboard shift cable?
0:373:22Outboard control cable adjustment for shifting gears - forward / reverseYouTubeStart of suggested clipEnd of suggested clipWhen you push the cable the throttle goes slowly in and out so for example if you adjust the cable aMoreWhen you push the cable the throttle goes slowly in and out so for example if you adjust the cable a little bit. It will make a difference in the way it works.
How tight should the throttle cable be?
The accelerator cable tension is usually set so that 2-3mm of free play is present in the throttle grip. Once the correct tension has been applied, the lock nuts should be snugged and any dust covers should be slid back over the adjusters. Cables can be adjusted using the appropriate size wrench.
How can I make my accelerator more responsive?
One of the easiest ways to improve engine and throttle response is by making sure your fuel filter is clean. When you stomp on the gas pedal, it sends a signal for more fuel to go into the engine.
What is throttle friction adjustment?
Adjust the throttle friction with the adjustment screw that's typically below the throttle on the tiller. Set it until you feel a slight drag on the handle when accelerating or decelerating. Clockwise increases friction, and counterclockwise decreases it.
How do you adjust a shift cable?
2:304:47B&M Transmission - How to Adjust an Automatic Shift Cable - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou're going to make sure that the swivel moves freely in the proper hole location. Next you'reMoreYou're going to make sure that the swivel moves freely in the proper hole location. Next you're going to take the swivel back out and shift the transmission back in the park.
How do you adjust a shifter cable on a boat?
1:396:16Mercruiser Alpha Shift cable adjustment - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo the center of the hole here. Exactly six inches this is four drives from 1976 up previous to 1976MoreTo the center of the hole here. Exactly six inches this is four drives from 1976 up previous to 1976 that adjustment is 5 and 7/8 of an inch.
How do you adjust a lower shift cable?
0:286:12How To: Install a Sterndrive Assembly - Shift Cable Adjustment - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow we're going to remove the lower shift cable and we will just take off the nut on the front side.MoreNow we're going to remove the lower shift cable and we will just take off the nut on the front side. And the cotter pin on the back. Side. I'm going to go ahead and remove the cable.
How do you tighten a boat throttle lever?
0:301:38How to: Stop your Yamaha throttle from drifting back. - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou're gonna find the little flat head screw in there clockwise tightens counterclockwise loosens IMoreYou're gonna find the little flat head screw in there clockwise tightens counterclockwise loosens I recommend that you do this on the water to feel. So you can get the detent. Exactly where you want.
How do boat throttle controls work?
1:479:27Boat throttle controls - how they work. Using a boat shifter - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis is essentially your accelerator pedal. And also your transmission shifter any point forward ofMoreThis is essentially your accelerator pedal. And also your transmission shifter any point forward of the locking neutral. Position is for momentum. So if you want to go forward slowly.
How to change throttle position on a motor?
Ensure that the throttle position does not change at the motor. Push the throttle to the "Full forward" position. Ensure that the throttle arm at the motor travels to the throttle stops. Move the cable to a lower hole on the control if the lever travel is insufficient to reach full throttle. Tighten the jam-nut on the throttle cable with ...
How to adjust gearbox cable?
Adjust the gearbox control cable. Place the control lever in the neutral position. Loosen the jam-nut on the cable adjuster with the wrenches. Extend or collapse the adjuster until the shift arm on the engine is in the neutral position.
Why is cable adjustment important?
Cable adjustment is crucial to proper engine and gearbox control and response. Improperly adjusted cables can prevent the engine from developing full rpm and prevent the gearbox from going fully into gear or from engaging at all. Partially engaged gearboxes can quickly wear themselves out, requiring the replacement of expensive gears.
Do gearboxes wear out?
Partially engaged gearboxes can quickly wear themselves out, requiring the replacement of expensive gears. Cables require periodic maintenance in the form of lubrication and replacement due to wear with heavy use.
