- Look for the set screw opening along the side of the faucet handle. ...
- Grasp the sleeve around the faucet cartridge and pull it off the faucet to expose the cartridge body.
- Pull the small plastic disk off the Delta faucet stem to expose the scald guard. ...
- Grab the scald guard with your fingers and pull it from the cartridge. Turning the guard counterclockwise increases the water temperature.
- Insert the scald guard back into the cartridge. The notches on the scald guard must fit between the slots in the cartridge.
- Slide the plastic disk onto the faucet stem. Push the sleeve over the faucet cartridge. Replace the faucet handle and tighten the set screw.
How to install a bathroom faucet by Delta?
Turn Off the Water
- The first step on how to install a widespread faucet is to remove all items from under the sink.
- Place a bucket, pan or rags under the work area. ...
- Turn off the hot and cold water supply lines at the shut-off valves beneath the sink.
- If there are no shut-off valves, turn off the main water supply. ...
How to fix a leaky delta style bathroom faucet?
Repairing your old Delta faucet
- Turn off the water supply to your shower. ...
- Go outside and turn on any of your home’s wall hydrants or faucets. ...
- After you have removed this screw, the bonnet nut will also have to be removed. ...
- Equip yourself with a pair of fine tweezers. ...
- Once you have removed both the springs and the seats, inspect the inside of the housing. ...
How to fix a Delta monitor shower faucet?
Prepare Your Tools
- Allen wrench
- Channel-lock pliers
- Faucet replacement kit
- Plumber’s grease or putty
How do you repair a Delta single handle faucet?
Things You'll Need
- Parts kit.
- Silicon Plumbing Grease
- Flat Screwdriver
- Needle Nose Pliers
- Channel Lock Pliers
What is a Delta scald guard?
The design of the Delta scald guard allows you to increase or decrease the maximum water temperature at the faucet without making an adjustment to the water heater thermostat or disconnecting your home’s water supply. Determine which Delta faucet you have installed in the shower to help make the correct adjustment.
How to increase water temperature on a scald guard?
Grab the scald guard with your fingertips and pull it from the handle assembly. Rotate the guard counterclockwise to increase the water temperature and counterclockwise to decrease it. Each notch on the guard represents a water temperature difference of 4 to 6 degrees.
What temperature does Delta anti scald faucets work at?
Delta anti-scald shower faucets come with “Rotational Limit Stops” to keep the shower water from reaching scalding temperatures. Since many water-heater manufacturers set tank-style water heaters to 120 degrees Fahrenheit before shipping them from the factory, increasing the temperature to 140 degrees is necessary to sanitize dishes ...
How to get shower handle off stem?
Pick a hex key from a set that fits the opening. Insert the hex key into the opening and turn the key counterclockwise to loosen the setscrew until you can pull the shower handle from the stem. Do not remove the handle at this time. Rotate the shower handle to the right until it stops. Let the cold water run until it reaches its coldest temperature.
How to reload a shower handle?
Click here to reload. Move the shower handle to the left until it stops. Allow the hot water to run from the showerhead. Place a glass, mercury-free oral or candy thermometer in a plastic drink tumbler. Place the tumbler beneath the showerhead stream and allow the hot water to fill the tumbler.
How to keep shower water warm in shower?
Place the tumbler beneath the showerhead stream and allow the hot water to fill the tumbler. Watch the thermometer to monitor the temperature of the hot water. Once the reading on the thermometer appears to stabilize, note the temperature and turn off the water in the shower.
Can you get burns from a Delta shower?
Unfortunately, increasing the water heater temperature could result in burns while taking a shower. Adjusting the “Rotational Limit Stop” anti-scald valve allows you to raise the temperature setting on your water heater and still avoid burns. Look on the side of the Delta shower handle for the small setscrew opening.