How do you adjust the pilot light on a Coleman furnace? Locate the access plate on the front of your furnace, and unscrew the screws that are connecting the access plate to your furnace. Observe the flame. Turn that screw counter-clockwise, and the flame should grow.
Full Answer
How do I adjust the flame on my pilot light?
Rotate the screw on the pilot light clockwise, and the size of the flame will decrease. Your flame should be a consistent height, and it should not appear to be flickering.
How do you adjust the flame on a gas furnace?
Rotate the screw on the pilot light clockwise, and the size of the flame will decrease. Your flame should be a consistent height, and it should not appear to be flickering. Return the access place to the front of your gas furnace. You will simply do this by re-screwing it back into place until it is tightly secured.
How do you fix a flickering pilot light on a gas furnace?
Do this if you believe your flame is too low. Rotate the screw on the pilot light clockwise, and the size of the flame will decrease. Your flame should be a consistent height, and it should not appear to be flickering. Return the access place to the front of your gas furnace.
How do I open my furnace to see the flame?
Locate the access plate on the front of your furnace, and unscrew the screws that are connecting the access plate to your furnace. This will allow you to actually see the flame.
Where is the pilot light adjustment screw?
0:271:25How To: Adjust the pilot flame - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow I will show you how to adjust the pilot flame the adjustment screw of the pilot flame is behindMoreNow I will show you how to adjust the pilot flame the adjustment screw of the pilot flame is behind this cover we can press through this cover. And find the adjustment screw.
How do you adjust the flame height of a pilot?
How to Adjust the Pilot Light Flame on a Gas FurnaceTurn that screw counter-clockwise, and the flame should grow. Do this if you believe your flame is too low.Rotate the screw on the pilot light clockwise, and the size of the flame will decrease. ... Return the access place to the front of your gas furnace.
Can you adjust the pilot light on a furnace?
Adjusting the Flame There is usually a small screw on the pilot valve body that will adjust the standing pilot flame. You may have to refer to the furnace manufacturer's instructions to find the screw. Turn the screw as needed to adjust the flame throw.
Can you adjust the flame on a pilot light?
On some fireplaces, there will be a "Lo-Hi" button that allows you to adjust the flame upward or downward. On others, there will be a screw that you can easily adjust with a screwdriver. Turning the screw clockwise will lower the flame, while a counterclockwise motion will turn it up.
How do you adjust a gas flame?
NOTE: If the flames are too high or low and you must adjust them, you may do so manually.Light all surface burners.Turn the knob on the burner being adjusted to Lo.Remove the knob.Insert a small, flat-blade screwdriver into the valve shaft.Turn the valve to adjust the flame.Replace the knob.More items...•
What should pilot light look like?
You should be able to clearly see the flame of the pilot light. The first thing to check is the color of the flame. A natural gas flame should be a bright blue color with a small amount of yellow at the very tip. A propane flame will have more of a bluish-green flame with a tinge of yellow at the tip.
How do I adjust the flame on my furnace?
All you will need to do is to twist the adjustment screw of the flame till the flame goes from one and half inches to two inches, which is about 4 to 5 centimeters high. Look for the adjustment screw on the pilot assembly close to the gas valve if the control valve has this adjustment feature.
How do you adjust the flame on a thermocouple?
Adjusting the Thermocouple Correcting the first condition is a simple process. Simply shut off the gas, reach under the burner and push or pull the probe to reposition it. If the thermocouple is faulty, remove it by unscrewing it from the burner and pulling it out. Reverse the procedure to install a new one.
How do you set a pilot light?
If you have a gas furnace, here are the steps on how to light a pilot light.First, locate the pilot valve on the furnace. ... Find the gas valve and turn it to the "off" position. ... Turn the valve to the “pilot” position.Press and hold the reset button.If the reset button fails, ignite the lighter.More items...
How do you fix a yellow flame on a gas heater?
Gas burners burn blue if the ratio of fuel to air is correct. A yellow burner flame is a symptom that the burner is not getting enough air for complete combustion of the gas. Correcting this problem involves adjusting the burner's air shutter to admit more air, something that an experienced do-it-yourselfer can do.
How do you fix a yellow pilot light?
If you notice that you pilot light is burning yellow instead of blue, contact Jerry Kelly. The issue can typically be fixed by cleaning out the air intake valve to the pilot light, which should only be done by a professional who knows how to access and repair the part.
Can pilot light be too big?
What happens if the pilot light is too long? If the pilot flame is too long it will not reach the sensors and they could not ignite the system. Also, the bright orange light does not provide the temperature needed for the thermocouple to work.
What is the pilot light on a furnace?
The pilot light has a separate small gas line running to it with its own valve. When the furnace comes on, this valve opens, and then the electric spark ignites the pilot. A flame sensor detects that the pilot is lit, opens the valve to the burners, and the pilot light ignites the burners.
Where is the reset switch on a furnace?
Locate the manual reset switch near the left side of your furnace blower.