how do you adjust the flame on a heat and glo fireplace

If your Heat N Glo fireplace comes with a remote control feature, you can easily adjust the flame height and control the pilot light. Just press the up button on your remote control to increase flame height. Otherwise, press the down button to decrease flame height.

Full Answer

How do you light a heat N Glo gas fireplace?

Light the Heat-n-Glo fireplace. If your model operates with a remote control, press the "Flame" button on the remote. For models with a wall switch, dial the "On/Off" switch to "On."

How do you adjust the flame on a gas log fireplace?

Adjust the height of gas log fireplace flames for comfort. Locate the gas log control knob. Look below the ceramic logs and identify the control knob, typically black with a small pointer and featuring the word "pilot.".

How to adjust the flame on a gas grill?

To adjust the flame, you have to use the control knob. Turn the knob to the right, if you want to make the flame lower. And if you want to make the flamer bigger, turn the knob in the opposite direction. Simply put, turning the knob to the right will decrease the flame, while turning the knob to the left will increase the flame.

How do I adjust the air-to-gas ratio on my Heat-N-Glo fireplace?

This mixture of air and fuel adjusts by turning the valve inside the control panel of the fireplace. The valve works with a setscrew that regulates the amount of air flowing with the natural gas used to operate the Heat-n-Glo fireplace. Adjusting the air-to-gas ratio takes only a few minutes using a flat-blade screwdriver.

How do I make my gas fireplace flame better?

0:082:47How To Adjust The Height Of The Flame In A Fireplace - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you want the flame higher we'll lower it'll say to increase it or decrease it. Or I'll say highMoreIf you want the flame higher we'll lower it'll say to increase it or decrease it. Or I'll say high and low and you just rotate it around according to what you what you would.

How do you adjust the height of the flame?

To adjust the flame: 1. The height of the flame can be adjusted with the needle valve at the bottom of the burner. 2. The color of the flame can be adjusted by turning the barrel of the burner clockwise (less air) or counter clockwise (more air).

Why are my gas fireplace flames so low?

The little flame you see in your gas fireplace after you have turned it off is called a pilot light. A Standing Pilot Light runs constantly, whether your fireplace is on or off.

How high should the flame be on a gas fireplace?

Then, turn the gas on and light the pilot. Turn the burner on and set the flame height to high. Take a reading. This time, you want to see an ideal reading of 3.5 inches or the pressure rating indicated in the manual.

How do you adjust the air to flame ratio?

0:312:24How to adjust air shutters on stove tutorial DIY Windy City ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipOr completely shut. So once you loosen the screw you'll want to open it up so you get these air gapsMoreOr completely shut. So once you loosen the screw you'll want to open it up so you get these air gaps in each side all right tighten the screw back. Down. And then you'll want to put this back in.

Where is the pilot light adjustment screw?

0:271:25How To: Adjust the pilot flame - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow I will show you how to adjust the pilot flame the adjustment screw of the pilot flame is behindMoreNow I will show you how to adjust the pilot flame the adjustment screw of the pilot flame is behind this cover we can press through this cover. And find the adjustment screw.

How do you adjust the regulator on a gas fireplace?

0:241:38How to adjust gas pressure, adjust gas regulator tutorial DIY ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou'll go back behind the piece of equipment. And unthread this silver cap that's in the very centerMoreYou'll go back behind the piece of equipment. And unthread this silver cap that's in the very center of the regulator. Once you have that cap off you'll notice that there's a plastic adjustment.

How do you adjust the airflow on a gas fireplace?

1:043:34Gas Fireplace Troubleshooting - Adjusting the Air Shutter - YouTubeYouTubeStart of suggested clipEnd of suggested clipHead right here you loosen that up you twist this it's opening on both sides. Gets bigger or smallerMoreHead right here you loosen that up you twist this it's opening on both sides. Gets bigger or smaller. So it's all based on elevation.

How do you change a yellow flame to a blue flame?

On most stoves, the air shutter is just behind the burner gas valve. It is a sliding plate or tube that covers the burner air vent. Loosen the set screw that keeps the shutter from moving. Turn the burner on fully and slowly open the shutter until the flame turns blue.

What Colour should gas flames be?

blueA healthy, properly burning flame on gas appliances should be blue in color, sometimes with a tiny tip of yellow, with a little light blue triangle at the center. This blue color flame indicates that there is safe, efficient and more complete fuel combustion.

Should my gas fire have blue flames?

A natural gas flame should be blue. Not having a natural gas blue flame color or an LPG (propane) blue flame color, and having yellow or red flames instead, could be indicative of an appliance problem.

Step 1

Light the Heat-n-Glo fireplace. If your model operates with a remote control, press the "Flame" button on the remote. For models with a wall switch, dial the "On/Off" switch to "On."

Step 2

Remove the screws from the control panel plate on the right-hand side of the Heat-n-Glo to take off the plate. Locate the valve in the upper-right corner inside the control box.

Step 3

Insert a flat-blade screwdriver into the setscrew on the right side of the valve and twist counterclockwise to increase the gas-to-air ratio. Turn the setscrew clockwise to reduce air flow mixing with gas. Ask a friend to describe the flame color and intensity in your Heat-n-Glo fireplace to help with your adjustments.

How to change the color of a gas fireplace?

To adjust a gas fireplace’s flame color, follow these steps. 1. Find the Gas Log Control Knob. Light the gas logs by turning on the pilot knob. Allow it a couple of minutes while monitoring the color of the flames. If when it’s first turned on, the flames are mostly blue, that’s normal. After the particles and dust is burned off, ...

What to do if your gas fireplace doesn't change?

If There Isn’t a Change, Check your Chimney or Air Vent. If you do not see a change in your gas fireplace’s flames, turn it off completely. Wait until it has cooled, and then perform some routine maintenance and checks on your fireplace ventilation.

How long to wait after changing gas fireplace controls?

Give the fire a few minutes to adjust to the different air levels. We would suggest waiting 30 minutes after making a change to see what it did and how the gas fireplace will respond.

What color is the tip of a gas fireplace?

That’s why gas fireplaces have a flame whose tips are a yellow or orange color.

How to control the color of a fireplace?

Make Sure the Damper is Open. By opening the damper to the fireplace, you are allowing proper ventilation. This will control the color of the flame. To adjust it so that the flames have an orange or yellow tip to them, lower the air input. You can do this by changing the damper or by closing the air shutter.

How to tell if a fire is blue?

If they still aren’t there and the flames are blue, follow the next steps. 2. Make Sure the Damper is Open.

What happens if gas pressure is too low?

You can check the gas pressure, and if it’s too low, there won’t be enough to support higher flames. If there is too much airflow, it can hinder the fire. Restricting the vent to limit the airflow can also allow for higher flames.

Adjust Pilot Light Flame On Gas Fireplace

You can enjoy your fireplace only till the pilot light stays on. The pilot light provides heat to power the furnaces, water heater, and fireplaces. With the help of a thermocouple, the pilot light stays on and keeps the fireplace burning.

Solutions To 3 Problems With Gas Fireplace Flame

It goes without saying that the flame is the essence of a fireplace. This is why you always have to make sure the flame burns perfectly in your gas fireplace. However, despite maintaining everything your gas fireplace can have some problems with its flame.

How do you adjust the flame color on a gas fireplace?

Adjust the vent door to control the flame color. The flame will get bluer the more you open the vent door. And if you close the vent door, the flame will get red. Adjust the vent door at a midpoint to get a perfectly colored flame.

Is it normal for Mantle to get hot?

Yes, it’s normal to get the mantel hot. But, look for the solutions when the mantel gets too hot.

How high should the flames be on a gas fireplace?

It’s important to keep the flame of your gas fireplace at its perfect size. The ideal height of the flame should be 3.5 inches. Always try to adjust your flame to this height.

How do you fix a low flame on a gas fireplace?

If you want to get a bigger flame on your gas fireplace, you can use silica sand over your burner in case you own a natural gas log. However, when it comes to propane gas fireplaces, you can use vermiculite on the burner to fix the problem of a low flame on a gas fireplace.

What should the flame look like in a gas fireplace?

The flame of your gas fireplace should be steady and yellow. If the flame is blue, then adjust your air vent a bit. In case the flame is red or orange, open the air vent to make the flame yellow again.

Care & Maintenance

Need a repair or troubleshooting help? Use the Heat & Glo Owner Support Center to register products, access customer service, find your product’s manual and get answers to commonly asked questions.

Use & Care Videos

Tips on using battery backup to start your fireplace with a remote or wall switch.

Warranty Information

View the current warranty coverage, period, conditions and exclusions for your indoor or outdoor gas, wood, pellet and electric hearth product.

Indoor Fireplace Maintenance Checklist

Ensure years of cozy comfort and enjoyment from your indoor hearth product by following this handy step-by-step checklist.

Outdoor Fireplace Maintenance Checklist

By following these steps, you can keep your outdoor hearth product in top operating condition for years to come.

Step 1

Locate the gas log control knob. Look below the ceramic logs and identify the control knob, typically black with a small pointer and featuring the word "pilot."

Step 2

Light the gas logs by turning the control knob to the "pilot" setting. Rotate the knob to the left and push in to allow gas to flow to the pilot light. Press the sparker to ignite the pilot light or use a match.

Step 3

Release the control knob and allow the flame to burn for one minute. Turn the control knob to the lowest flame setting as indicated on the knob.

Step 4

Locate the switch at the front of the gas logs marked "on." Move the switch to the "on" setting to ignite the burners below the gas logs. Observe the initial flame height of the logs following ignition.

Step 5

Turn the control knob to the left to increase the flame height. Make small incremental adjustments to adjust the flame height.

Step 6

Monitor the flame height as the room warms. Reduce the flame height by turning the control knob to the right.