How to Set the High & Low Adjustments on a Homelite Chainsaw
- Clean the Air Filter First. Open the cylinder cover with a screwdriver. ...
- Add Fresh Fuel. Fill the chainsaw tank with freshly mixed chainsaw fuel. ...
- Adjust the "L" Screw. Make an adjustment to the Homelite chainsaw carburetor screw marked "Lo" by turning it to the left. ...
- Homelite Chainsaw Idle Adjustment. ...
- Set the High-Speed Screw. ...
How do you adjust the trigger on a Homelite chainsaw?
Start the Homelite chainsaw. Squeeze the trigger lightly and let it run at a high idle for a couple of minutes to warm up. Let the saw idle while making the adjustments.
How do you oil a Homelite XL chain saw?
Even though the Homelite XL chain saw is an older model machine, it still comes equipped with an automatic oiler that disperses oil from the tank to the channel and groove in the guide bar, and ultimately to the chain. When you notice too much or too little oil on the chain, stop cutting immediately, and diagnose and fix the problem.
Why choose Homelite electric chain saws?
Homelite electric chain saws are designed for use by the average homeowner and are equipped with numerous features, such as an oil view window and safety tip to prevent kickback. Chain saws require regular maintenance and cleaning, and Homelite electric chain saws are designed to be disassembled and reassembled by the owner.
How do Homelite chainsaw carburetors work?
Hunker may earn compensation through affiliate links in this story. Homelite chainsaw carburetors come with adjustable low- and high-speed screws, which allow you to control the amount of air mixing with the fuel at high and low speeds.
How do I tighten the chain on my Homelite chainsaw?
0:222:13homelite 3514c chainsaw chain adjustment - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd we're going to oh not that one that one's screwed hold on going to tighten. This flat head screwMoreAnd we're going to oh not that one that one's screwed hold on going to tighten. This flat head screw. Up not too much we want to be able to have. Just the tips being inside the bar. So a little bit.
How do you tighten the chain on a Homelite Textron?
1:173:40How to tighten a chainsaw chain - YouTubeYouTubeStart of suggested clipEnd of suggested clipAlright here's our chain adjustment screw it's just a flathead screw. So we're going to get aMoreAlright here's our chain adjustment screw it's just a flathead screw. So we're going to get a flathead screwdriver. And right now the chains are loose it's pulling out of the bar.
How do I tighten my chainsaw chain?
There is a tension screw located near the base of the bar on the chainsaw. To tighten the chain, turn it clockwise, and to loosen turn it counterclockwise. Don't over-tighten the chain as this could cause it to break.
Why does my chainsaw chain keep loosening?
Chain Not Set Properly One of the most common reasons why your chain might be coming loose is because it was not set properly. When you go through the steps to tension your chain, you need to finish those steps by setting the tension so it won't change as you work your saw.
How do you tighten the chain on a Homelite 14 inch electric chainsaw?
0:131:57How to Adjust Your Electric Chainsaw Chain - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd turn the tensioning screw a half turn clockwise. And repeat until you get there if the chainsMoreAnd turn the tensioning screw a half turn clockwise. And repeat until you get there if the chains too tight it won't rotate at all so turn the tensioning screw a quarter turn counterclockwise.
Why is my chainsaw not cutting with a new chain?
0:051:52Top Reasons Chainsaw Not Cutting — Chainsaw TroubleshootingYouTubeStart of suggested clipEnd of suggested clipYou can tighten or loosen the adjustment screw to improve the chain tension. Follow manufacturer'sMoreYou can tighten or loosen the adjustment screw to improve the chain tension. Follow manufacturer's recommendations for the proper setting. If the chain bar is bent or worn-out.
How do I know if my chainsaw chain is too loose?
The chainsaw chain should feel snug but still pull freely. Finally, perform a "snap" test to ensure proper saw chain tension. Simply pull the chain on the underside of the guide bar down so one or two drive links are out of the guide bar rails and release it. The chain should snap directly into position.
How tight should a drive chain be?
4%It is important to maintain the proper amount of chain tension. If the chain is excessively tight, rapid chain wear and loss of lubricant will occur. If chain is too loose, excessive vibration and pulsation may occur causing chain damage. For normal drives, adequate slack should be adjusted to 4% of the chain span.
Why is my chain not tightening?
Turn the tension control screw to the right to tighten the chain and to the left to loosen it, instructs eReplacementParts.com. Attempting to turn the tension screw without loosening the nuts first may be the reason you can't tighten the chain. Tighten the nuts back into place when you have the chain properly adjusted.
How tight is a chainsaw blade supposed to be?
A properly-tensioned chainsaw chain should still be just a little loose on the chainsaw guide bar, but the chain needs to be tight enough that you can't pull the drive links out of the bar nose.
Why is my chain always loose?
Many times, if your chain keeps getting loose, it means the axle or those chain tensioning bolts are not tight enough. This is the cause of a loose chain 90% of the time. If the teeth on the front sprocket or rear sprocket (or both) are worn down, it can also cause a chain to become loose.
How to protect your hands when chain sawing?
1. Put on a pair of heavy duty gloves to protect your hands and make sure the chain saw is disconnected from any power source.
Can you disassemble a Homelite chainsaw?
Chain saws require regular maintenance and cleaning, and Homelite electric chain saws are designed to be disassembled and reassembled by the owner. Whether you are replacing the chain with a new one or reinstalling the old one, you must pay careful attention to avoid any safety issues.
Who is Melissa Rae?
Melissa Rae has been a writer since 2008, specializing in home-and-garden, business, technology and education topics. Rae holds a Bachelor of Science in business administration from Herzing University. Related Articles. How to Adjust the Chain Saw Tension on a Husqvarna 335. How to Tighten a Poulan P3416 Chain.
How many settings does a Homelite chainsaw have?
The carburetors on Homelite chainsaws come with three adjustable settings that allow you to regulate fuel and engine speeds. While adjusting the idle speed and the low speed is not too complicated, it is best to leave high speed adjustment to a professional with a tachometer. If you exceed the maximum engine speed while adjusting ...
How to start Homelite chainsaw?
Start the Homelite chainsaw. Squeeze the trigger lightly and let it run at a high idle for a couple of minutes to warm up. Let the saw idle while making the adjustments. Remember to never use a chainsaw while it spins in idle.
How to remove carburetor from engine?
Start by unscrewing the top engine cover using the screwdriver. Lift the cover up to free it from the cylinder area. Disconnect the air filter and remove it from the engine. Clean the air filter by slapping off all of the sawdust.
Where are the carburetor adjustment screws on a Homelite?
Locate the three carburetor adjustment screws. These screws will either be located just above the gas tank or just above the clutch area, depending on the Homelite model, and will be deeply recessed. Use the flashlight, if necessary, to locate the carburetor adjustment screws.
Can you adjust a Homelite chainsaw carburetor?
A Homelite chainsaw carburetor adjustment can be done at home, but performing this procedure yourself may void your warranty. It is also important to follow safety precautions when making a Homelite chainsaw idle adjustment, because the chainsaw will be running. However, the idle adjustment is just the beginning.
Where is Eric Blankenburg?
Currently based in Minneapolis, Minn., Eric Blankenburg has been a freelance journalist since 2000. His articles have appeared in "Outside Missoula, Outside Bozeman," "Hello Chengdu" and online at GoNomad.com and various other websites. He holds a Bachelor of Arts in creative writing from the University of Montana.
How to remove a chain from a saw?
Push the yellow chain tensioner knob in and turn it counterclockwise to release and remove the chain cover, and gain access to the bar and chain. Push the guide bar toward the saw, and remove it and the chain. Clean the groove and channel with a stiff-bristled brush.
How to fill a Homelite XL chain saw?
1. Check the oil reservoir to ensure that there is oil in the tank that feeds the automatic oiler. If the tank is empty or low, fill the tank with Homelite Bar and Chain Oil for the best results. Fill only to the fill line. The Homelite XL chain saw is designed to use one tank of oil per each tank of fuel. Fill the oil reservoir each time you fill ...
What to do if you have too much oil on a chainsaw?
When you notice too much or too little oil on the chain, stop cutting immediately, and diagnose and fix the problem. Cutting wood with too little lubrication on the chain saw chain can be detrimental to the saw and can pose safety risks to you.
Does the Homelite XL chain saw have an oiler?
Even though the Homelite XL chain saw is an older model machine, it still comes equipped with an automatic oiler that disperses oil from the tank to the channel and groove in the guide bar, and ultimately to the chain. When you notice too much or too little oil on the chain, stop cutting immediately, and diagnose and fix the problem.
Where is the oil adjustment screw on a chainsaw?
The screw is located on the bottom of the chain saw and increases or decreases the oil output in relation to the adjustment. Before adjustment, start the chain saw and allow the engine to run for a couple of minutes.
