Nelson Sprinkler 6000R Instructions
- Step 1. Grasp the top of the 6000 sprinkler stem with your fingers and pull up to expose the nozzle socket. Wrap the...
- Step 2. Slip the supplied wrench over the 6000 spray head and pop the head off like a bottle cap. Insert the wrench into...
- Step 3. Place the supplied 6000 Click-Set Disk on top of the arc collar inside the stem with...
How are Nelson 6000r sprinklers installed?
Once the underground irrigation pipes are in place, you're ready to install the Nelson 6000R sprinklers. Nelson instructs users to avoid using any kind of thread sealant compound to create a watertight bond. Instead, the sprinklers are clamped into place once they're placed in the hole.
How do you change the nozzle on a Nelson sprinkler?
Nelson pop-up sprinklers are packaged with a variety of interchangeable nozzles that determine the arc or range of the spray of water. To change a nozzle, remove the cap from the top of the sprinkler body and use a sprinkler adjustment tool to remove the screw holding the nozzle in the side of the sprinkler body.
How do I adjust the water range on my 6000r sprinkler?
Nelson 6000R sprinklers make adjusting the water range simple. To achieve a 360-degree spray, install the Click-Set disk with the black side facing upward and do not set the collars. In areas where you prefer a partial spray, remove the Click-Set disk and turn the sprinkler so it is positioned in the middle of the area you wish to spray.
How do you set the radius of Nelson gear drive pop-up sprinklers?
The radius of Nelson gear drive pop-up sprinklers can be set with a patented adjustment disk in the top of the sprinkler body under the cap. When the black side of the disk is facing upwards, the sprinkler will rotate 360 degrees. To set a smaller radius, remove the disk and manually move the nozzle to point toward the center of the watering area.
How do you adjust a rotary Nelson sprinkler head?
1:264:12How to Adjust Nelson Sprinkler Heads - YouTubeYouTubeStart of suggested clipEnd of suggested clipHead if you want to redirect the spray pattern from a full circle to partial. That task enables theMoreHead if you want to redirect the spray pattern from a full circle to partial. That task enables the adjustable collars to move adjust. Those collars to direct the sprinkler heads rotation.
How do I adjust my adjustable sprinklers?
1:263:48Hunter Spray Adjustments and Maintenance - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you need to reduce the radius. Turn the screw clockwise. If. You need to reach a little farther.MoreIf you need to reduce the radius. Turn the screw clockwise. If. You need to reach a little farther. Turn it the opposite direction or counterclockwise.
How do you adjust the spray angle on a sprinkler system?
0:311:37Spray Sprinkler - How to Adjust the Throw Pattern - YouTubeYouTubeStart of suggested clipEnd of suggested clipMarked with an l or an o by twisting the spray head stem. Once the left point is set adjust theMoreMarked with an l or an o by twisting the spray head stem. Once the left point is set adjust the throw pattern from zero to 360 degrees by turning the collar at the bottom of the nozzle.
How do you adjust a sprinkler head from left to right?
2:173:28Rain Bird 5000 - Setting the Left Stop w/ Slip Clutch - YouTubeYouTubeStart of suggested clipEnd of suggested clipUntil you get the desired left-hand stop that you want. And then you're going to still get that 180MoreUntil you get the desired left-hand stop that you want. And then you're going to still get that 180 degree pattern. And then what you can do from there to adjust the right-hand.
How do you adjust sprinkler head height?
1:364:59Lawn Irrigation: How to adjust your rotor or pop-up sprinkler head heightYouTubeStart of suggested clipEnd of suggested clipThe riser from the PVC pipe cut about on one of these knuckles here and make sure you it's when youMoreThe riser from the PVC pipe cut about on one of these knuckles here and make sure you it's when you know when you put this back on there test it put it back in there and make sure it's not too low.
How do you regulate sprinkler heads?
To adjust a stationary sprinkler head, find the spray radius adjustment screw on top of the nozzle. You may need to adjust it slightly to point the water spray in the direction of your lawn that you want it. Turning it clockwise can also help lower the water pressure on a spray head that is shooting too much water out.
How do I change the direction on my Rainbird 5000?
1:171:59How To Adjust A Rain Bird 5000 Series Rotor - YouTubeYouTubeStart of suggested clipEnd of suggested clipStop insert the tool into the arc adjustment hole until it seats then turn the tool in theMoreStop insert the tool into the arc adjustment hole until it seats then turn the tool in the appropriate. Direction clockwise to increase the arc. And counterclockwise to decrease.
How do you change the rotation on Rainbird 5000?
0:413:43Rainbird 5000 Sprinkler Adjustment - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can tell by doing that gently and nope it's not slipping. So the only way that set the left stopMoreYou can tell by doing that gently and nope it's not slipping. So the only way that set the left stop on a Rain Bird head is to turn it in the ground or take the cartridge out pick it up and move it in
How do you adjust a Rainbird 32sa sprinkler head left stop?
0:042:43How to adjust a Rain Bird sprinkler head - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd the way you set up these is uh you turn this all the way to the left. And this is your startingMoreAnd the way you set up these is uh you turn this all the way to the left. And this is your starting point to the left. And this will rotate to the right.
Step 1
Grasp the top of the 6000 sprinkler stem with your fingers and pull up to expose the nozzle socket. Wrap the supplied clamp around the base of the stem where it meets the underground housing to hold the stem in place.
Step 2
Slip the supplied wrench over the 6000 spray head and pop the head off like a bottle cap. Insert the wrench into the nozzle retaining screw inside the stem, and unscrew it. Insert the desired nozzle into the nozzle socket. Different nozzles produce different precipitation rates.
Step 3
Place the supplied 6000 Click-Set Disk on top of the arc collar inside the stem with its black side facing up, and push until it clicks. The Click-Set Disk overrides the arc collars so the sprinkler rotates in a continuous circle when the system is active.
Step 4
Remove the Click-Set Disk from the top of the arc collar to set boundary points for the 6000 sprinkler rotation. Twist the stem until the nozzle is centered on the desired watering area and insert the Click-Set Disk back into place with the gray side facing up.
Step 5
Remove the Click-Set Disk from the 6000 if the memory ring isn't settled into it correctly. The memory ring keeps the settings in place during normal operation and can be viewed from the top of the Click-Set Disk. Twist the ring back into place and replace the Click-Set Disk.
Step 6
Turn the water on to confirm your settings. Insert the wrench into the nozzle retaining screw and clamp it tighter by turning it clockwise if you wan to reduce the water projection range. The screw must down far enough to clear the spray head.
Step 7
Snap the spray head cap back on top of the stem, insert the wrench into the screw in the dimple of the cap and turn it clockwise to tighten the cap.
How to adjust Nelson 6000R sprinklers?
Nelson 6000R sprinklers make adjusting the water range simple. To achieve a 360-degree spray, install the Click-Set disk with the black side facing upward and do not set the collars. In areas where you prefer a partial spray, remove the Click-Set disk and turn the sprinkler so it is positioned in the middle of the area you wish to spray. Install the Click-Set disk with the gray side facing upward and adjust the attached collars to define the spray area. Turn on the sprinklers after installation to check the spray of the installed sprinklers.
What is 6000R sprinkler system?
When you're fortunate enough to have an underground sprinkler system installed at your home, the days of watering by hand are over. Nelson 6000R sprinklers are commonly used by homeowners to facilitate the watering of their lawns. Once you're armed with the proper instructions, you can easily install and begin using these sprinklers to provide ...
How to make a sprinkler stop at the desired location?
To set a smaller radius, remove the disk and manually move the nozzle to point toward the center of the watering area. Replace the disk with the gray side facing up, and adjust the collars so the sprinkler will stop at the desired location as it rotates back and forth.
What is a pop up sprinkler?
Pop-up sprinklers are designed for use in lawns and other areas of turf, such as golf courses, that need frequent mowing. The entire sprinkler body remains in the ground until the water pressure forces it up, which protects it from being damaged by mowing or foot traffic.
Remove and turn sprinkler disk
Examine your sprinkler head. You should see a click-set disk near the nozzle. Remove this disk with your hand, and then turn the sprinkler manually. Continue to adjust it this way until the nozzle is centered on the new area you want the sprinkler to spray.
Replace the click-set disk
Using your hand, put the click-set disk back onto the sprinkler head. This makes sure that it sprays with the same consistency as it had before. The collars of the click-set disk can be adjusted so that the angle of the spray changes.
Adjust the memory ring if necessary
Check if your sprinkler has been turned past the regular set pattern. If so, the memory ring around the sprinkler head may have moved away from its original position and popped out of place. To fix this, simply remove the disk, and rotate the memory ring. Eventually, you should hear a clicking sound as the tab locks the ring into place.
