How to Adjust Weathermatic Sprinklers.
- Step 1. Hold the base of the Weathermatic sprinkler with one hand and the spray head with the other. Twist the spray head counterclockwise to unscrew ...
- Step 2.
- Step 3.
- Step 4.
- Step 5.
How do you adjust the head on a Weathermatic sprinkler?
Adjustments are made by twisting parts of the inner assembly with your hands and sometimes a supplied key. Hold the base of the Weathermatic sprinkler with one hand and the spray head with the other. Twist the spray head counterclockwise to unscrew it from the base.
What is a Weathermatic Turbo 3 sprinkler head?
A Weathermatic Turbo 3 sprinkler head is designed to be easy to adjust in short time. Rotary sprinkler heads are purchased with a tree of nozzles attached to a plastic centerpiece. You can remove the heads in the size you want to install in each sprinkler for the correct coverage.
What is the minimum arc adjustment range for Weathermatic sprinklers?
eHow may earn compensation through affiliate links in this story. The minimum arc adjustment range is 40 degrees. Weathermatic sprinklers are installed flush to the ground and are operated by a connected timer. The hidden sprinklers pop up and begin watering in a rotating fashion on certain days when activated by the programmed timer.
How do I choose the right sprinkler head for my home?
Sprinkler heads should only water the lawn, beds and plants without runoff or dry areas and need adjusting so as not to splash on hard surfaces and be wasteful. A Weathermatic Turbo 3 sprinkler head is designed to be easy to adjust in short time. Rotary sprinkler heads are purchased with a tree of nozzles attached to a plastic centerpiece.
How do you adjust a Weathermatic Turbo 3 sprinkler?
To adjust the arc, stand at the rear of the sprinkler, with the system on. The rear is the side opposite the front nozzle. Grasp the arc adjustment ring with ridges on it underneath the nozzle. Turn the top of the sprinkler head to select a range between 40 and 360 degrees then release it.
How do I adjust my adjustable sprinkler heads?
3:026:18Adjusting Your Sprinkler Heads - YouTubeYouTubeStart of suggested clipEnd of suggested clipPut it in the arrow on the top. Once it falls into the spot. Turn it until the screw. Holds theMorePut it in the arrow on the top. Once it falls into the spot. Turn it until the screw. Holds the nozzle in securely. Once the screw has covered a part of the nozzle.
How do you adjust the spray pattern on a sprinkler head?
0:311:37Spray Sprinkler - How to Adjust the Throw Pattern - YouTubeYouTubeStart of suggested clipEnd of suggested clipMarked with an l or an o by twisting the spray head stem. Once the left point is set adjust theMoreMarked with an l or an o by twisting the spray head stem. Once the left point is set adjust the throw pattern from zero to 360 degrees by turning the collar at the bottom of the nozzle.
How do you adjust a 360 degree sprinkler head?
0:423:02How To Adjust A Hunter Rotary Sprinkler Head - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse the plastic end of the Hunter rotor tool to adjust the PGP zark anywhere from 40 to 360 degrees.MoreUse the plastic end of the Hunter rotor tool to adjust the PGP zark anywhere from 40 to 360 degrees. The first step in setting your rotors arc is to make sure at the right hand stopping.
How do you adjust Rainbird 3.0 sprinkler heads?
0:241:50Rain Bird T-Bird Rotors: Arc and Radius Adjustment - YouTubeYouTubeStart of suggested clipEnd of suggested clipMake sure the sprinkler is rotating clockwise then push down on the nozzle. And while still pushingMoreMake sure the sprinkler is rotating clockwise then push down on the nozzle. And while still pushing down turn it clockwise to the additional degrees desired.
How do you adjust Rainbird spray heads?
1:001:58Adjusting your Rainbird Turf Sprays (1800).mp4 - YouTubeYouTubeStart of suggested clipEnd of suggested clipSimply turn the screw clockwise until the desired throw is achieved choking a spray head too muchMoreSimply turn the screw clockwise until the desired throw is achieved choking a spray head too much will cause inconsistent watering and uneven spray.
How to adjust Weathermatic Turbo 3 sprinkler head?
How do you adjust a Weathermatic Turbo 3 sprinkler head? To adjust the arc, stand at the rear of the sprinkler, with the system on. The rear is the side opposite the front nozzle. Grasp the arc adjustment ring with ridges on it underneath the nozzle. Turn the top of the sprinkler head to select a range between 40 and 360 degrees then release it.
What happens if your sprinkler heads leak oil?
But some sprinkler heads contain a small amount of oil inside that lubricates the gears. If the oil dries out or leaks, it can cause damage to the internal gears, and the rotating motion will stop working.
How to increase arc on Hunter nozzle?
To Increase the Arc. Insert the plastic key end of the Hunter wrench into the adjustment socket . While holding the nozzle turret at the right stop, turn the wrench clockwise. Adjust to any arc between 40° and 360°.
How to adjust weathermatic spray head?
Hold the ribbed section of the exposed Weathermatic inner assembly with one hand to keep it steady and grasp the top of the spray head with the index finger and thumb of your other hand. Twist the spray head to increase or decrease the arc angle or rotation range. A quarter-turn counterclockwise increases the range by 90 degrees. A full turn opens the rotation range to 360 degrees, which means the spray head will rotate in a continuous circle one way. The rotation range can be set anywhere from 40 to 360 degrees. Turn the spray head clockwise to decrease the rotation range.
How does Weathermatic sprinkler work?
Weathermatic sprinklers are installed flush to the ground and are operated by a connected timer. The hidden sprinklers pop up and begin watering in a rotating fashion on certain days when activated by the programmed timer. Each sprinkler's rotation and precipitation rate can be adjusted to better suit its designated watering area.
How to unscrew a spray head?
Twist the spray head counterclockwise to unscrew it from the base. Lift up on the spray head to remove the inner assembly. Place the inner assembly bottom down on a flat surface and push the spring-powered cover down to expose the nozzle socket on the side of the inner assembly.
How many degrees does a spray head rotate?
A full turn opens the rotation range to 360 degrees, which means the spray head will rotate in a continuous circle one way. The rotation range can be set anywhere from 40 to 360 degrees. Turn the spray head clockwise to decrease the rotation range.