How do you adjust a Craftsman 42 mower deck?
- Park and turn off the Craftsman riding lawnmower.
- Get off of the mower and walk around to the front.
- Locate the suspension arm on the left-front side of the riding lawnmower.
- Pick up the wrench and put it on the nut.
Full Answer
How do you raise the deck on a craftsman mower?
Craftsman mowers are user-friendly and reliable, even when you have to raise the mower deck. Luckily, you can raise the mower deck in one of two ways, and the easiest is by using the lever.
How do you adjust the blade on a craftsman mower?
Recheck the blade height measurements after adjustment and continue to adjust the front link adjustment nut until the front blade tip is 1/8-inch to 1/2 inch lower than the rear blade tip. Hold the adjustment nut with one wrench and tighten the jam nut with a second wrench. That's it.
How do you fix a craftsman riding mower that is too low?
Getting the most out of your Craftsman Riding Mower is essential, but the blade may leave bare patches if the mower deck is too low. Adjusting the mower deck’s height may take a bit of time, but the result should be worth the effort. Park the mower on level ground with the engine turned off.
How low should the front of a craftsman deck be?
Craftsman recommends the front be set 1/8 to 1/2 inch lower than the rear of the deck. If one side is connected to a height control lever, the procedure remains the same; find the two nuts and set them as desired.
How do you level a mower deck on a Craftsman 42?
0:392:45Leveling a Riding Lawn Mower Deck for an Even Cut - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe heights should be within 1/8 inch if not turn the lift link adjustment nut clockwise to raiseMoreThe heights should be within 1/8 inch if not turn the lift link adjustment nut clockwise to raise the left side of the deck or counter clockwise to lower it.
How do you adjust a Craftsman lawn mower deck?
4:175:45How to Adjust and Level the Deck Height of a Riding Lawn Mower ...YouTubeStart of suggested clipEnd of suggested clipTurn the adjustment nut counterclockwise to loosen or drop the front of the mower or clockwise toMoreTurn the adjustment nut counterclockwise to loosen or drop the front of the mower or clockwise to tighten or raise the front of the mower measure. The front and rear blade tips.
Why does my Craftsman riding mower cut uneven?
Some of the most common causes of a lawn mower cutting unevenly include damaged wheels, a loose, bent or dull mower blade, a bent crankshaft, and a clogged or damaged cutting deck.
How do you adjust the height on a Craftsman lawn mower?
0:412:40How to adjust the lawnmower's cutting height - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis particular lawnmower is adjustable from one inch to three inches in mowing height notice againMoreThis particular lawnmower is adjustable from one inch to three inches in mowing height notice again I pulled the lever towards the wheel. And move the lever forward and this lowers the deck.
Should mower deck wheels touch the ground?
Mower deck gauge wheels should be properly adjusted to prevent scalping grass on uneven terrain. The bottom of the wheels should sit approximately 1/8-1/2 of an inch from the ground, depending on your cutting height.
What are the height settings on lawn mower?
0:082:07Mow Lawn at Proper Height - YouTubeYouTubeStart of suggested clipEnd of suggested clipSome lawn mowers will have settings. And or letters or numbers on the wheels themselves. One twoMoreSome lawn mowers will have settings. And or letters or numbers on the wheels themselves. One two three or four a B or C those.
Why does my mower leave a row of grass between two blades?
Rows or streaks of uncut grass in your lawn may be the result of your lawnmower's cutting blades being dull or otherwise damaged. Dull blades are the result of normal wear and tear from mowing. The blades can be sharpened with a bench grinder by you or a professional.
How do I level my lawnmower deck?
Turn the adjusting lock nut clockwise to raise the mower and counterclockwise to lower it. Measure from the blade to the ground again on both sides and adjust until the difference between the blade tip heights are within ⅛ -inch. Rotate the blades so that their direction is now front to back.
Why is my lawn mower scalping?
Scalping a lawn is often caused when the mower blade is set too low. Ideal mowing should see you removing no more than 1/3 of the grass height each time. With lawn scalping, all of the leaf blades have been removed, exposing the roots.
How do you raise the height of a Craftsman riding mower deck?
Locate the attachment lift lever on the right side of the steering wheel. Press down on the plunger at the top of the lever, and move the lever forward to raise the mower deck or backward to lower it.
Is a push mower deck height supposed to be the same at the front and back?
For most effective results, a lawn mower deck should have a pitch, or height difference of 1/8-inch to 1/2-inch between the front of the deck to the back of the deck.
How do you fix a height adjustment lever?
0:442:19Replacing the Height Adjustment Lever (Southland Part # A101112)YouTubeStart of suggested clipEnd of suggested clipI'll begin by removing the nut that secures the adjustment. Lever. Now lift the edger. And place aMoreI'll begin by removing the nut that secures the adjustment. Lever. Now lift the edger. And place a 2x4 beneath the frame. Now I can remove the lever.
How much lower should a Craftsman deck be?
Craftsman recommends the front be set 1/8 to 1/2 inch lower than the rear of the deck. If one side is connected to a height control lever, the procedure remains the same; find the two nuts and set them as desired.
How many nuts are on a lawn mower deck?
Look for rods suspending the mower deck, which have two nuts threaded on their ends on the front and back of your mower. Additionally, on either side of the mower deck, there are another two sets of 2 nuts. To begin, the sides of the deck must be level. Make sure the blades are facing to either side of the mower.
Why is a riding lawn mower important?
A riding lawn mower makes cutting your lawn a breeze because it gets the job done quickly and easily. Getting the most out of your Craftsman Riding Mower is essential, but the blade may leave bare patches if the mower deck is too low. Adjusting the mower deck’s height may take a bit of time, but the result should be worth the effort.
What to do if your mower tires are not inflated?
Check the tire pressure. If your tires are not correctly inflated, the entire procedure may not work effectively. Making sure your tires are fully inflated will allow you to measure accurately. If they aren’t, you’ll have to readjust the mower deck again when they are. Park the mower on level ground.
Why do you need to set a mower deck?
Alternatively, you may need to set it because you need to mow different terrains or grass types.
How much does it cost to tune up a lawn mower?
Leveling or raising the mower deck is generally part of a mower tune-up. The cost of a tune-up varies but is approximately $139 to $225.
What is deck wheel?
Deck wheels, also known as anti-scalp wheels , are responsible for keeping your mower deck from damaging your lawn. If you adjust your mower deck, you may want to set your deck wheels. This will help keep your mower deck at the height that it should be and help you adjust it more accurately.
How to adjust a lawn mower if it isn't working?
If it isn't, adjust them. Turn the jam nut with your wrench to reach the adjustment nut. Turn the adjustment nut clockwise to raise the front of the mower or counter-clockwise to lower it until it is 1/8 inch higher than the back of the mower. Tighten the jam nut. Replace the spark plug wire.
Why level a deck?
A level deck is essential for a quality cut with any mower. The blades that cut the grass are attached to the deck. If the deck is crooked, the blades aren't level and can't give a straight cut. When the blades are replaced, you should level the deck to make sure they're all at the same length. Make sure that your mower is completely cool ...
How to adjust a mower blade?
Position a cutting blade front to back and measure each blade tip height. The front blade tip should be 1/8-inch to 1/2-inch lower than the rear blade tip. To adjust, loosen the jam nut and then turn the front link adjustment nut clockwise to raise the front of the mower de ck or counterclockwise to lower it.
What do you need to level a riding mower deck?
To level the deck on your riding mower, you need a wrench set and a ruler. You also need a tire pressure gauge and air ...
How to level a deck?
Level side to side. First, we'll level the deck side to side. Position both cutting blades side to side and measure the height of each outside blade tip. The heights should be within 1/8-inch. If not, turn the lift link adjustment nut clockwise to raise the left side of the deck or counterclockwise to lower it.
