Download and Unzip the firmware executable from the Pentair website. Don't just run it, but use an unzip program like WinRAR to unzip and create a new file folder. In the folder open the file called update.txt with notepad.
Full Answer
How do I update the firmware of my protocol adapter?
For all systems, first update the Protocol Adapter, as explained in Step 1. Once the Protocol Adapter is up to date, then perform the subsequent updates depending on the interfaces you have installed in your system. NOTE: There is no need to update your adapter if it already has the latest firmware revision.
How to update a device without an Ethernet port?
The trick is to remove both devices from the network (i.e. they can't talk to anything but themselves), do the firmware update, and then put the devices back on the regular network. Without an ethernet port, that trick is impossible. Hence the question about model number. I was lookiing for the hardware specs and User Manual for the device.
What is a Pentair link?
It is simply the outside RF link between the EasyTouch and the inside RF link (receiver). The EasyTouch talks over this link to a device inside your house called a Protocol adapter. The Protocol adapter talks "Pentair" at one end and "Ethernet" out the other end.
How do I connect to Pentair ScreenConnect?
On your phone, open the Pentair ScreenConnect app. It should connect automatically and work as advertised now. 6. Grab a beer and get in your pool. You’ve earned it. Thanks for sharing your process to reset the IP address.
How do I reset my ScreenLogic interface protocol adapter?
Cycle the power to both of these devices. unplug and plug back in the wireless router to reset it.
What is the ScreenLogic protocol adapter?
The ScreenLogic2 Interface allows you to control the key functions of a pool or spa using the IntelliTouch® and EasyTouch® control systems. You can remotely manage, monitor and control via mobile device.
How do I update my Pentair EasyTouch firmware?
0:005:21How To Update Pentair Intellicenter using USB - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd transfer to the usb. And then we're going to plug our usb into the intel. Center. And then fromMoreAnd transfer to the usb. And then we're going to plug our usb into the intel. Center. And then from there we'll be updating. So step one plug your usb into your computer.
How do I reconnect my Pentair ScreenLogic?
0:121:38Screen Logic Basic Trouble shooting - YouTubeYouTubeStart of suggested clipEnd of suggested clipBy the panel you want to take off the cover and just make sure that you've got a green light soMoreBy the panel you want to take off the cover and just make sure that you've got a green light so right now this is not connected.
How do I connect my Pentair to WiFi?
0:172:25How To Connect Pentair IntelliCenter To a Wireless Network - YouTubeYouTubeStart of suggested clipEnd of suggested clipNetwork so what we're going to do first is go to settings. And then i'm actually going to go down toMoreNetwork so what we're going to do first is go to settings. And then i'm actually going to go down to pentair user portal what you want to make sure is enable web and mobile interfaces on.
Is there a new Pentair app?
Sanford, N.C. – Pentair Water Pool and Spa® has unveiled a convenient pool-automation app, ScreenLogic2™ Mobile, that gives millions of homeowners the ability to remotely control their pools and spas with an iPad®, iPhone® or iPod touch®.
How do I update IntelliCenter firmware?
Verify Your IntelliCenter Firmware Update Verify the firmware update: From the Home screen, tap Settings > Advanced System Configuration > System > Firmware. Once your firmware is 1.047, you can wait 48 hours for the 1.064 notification or repeat the 1.047 install process with the 1.064 file.
How do I set up ScreenLogic app?
0:1410:16ScreenLogic®- iPad Setup - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo let's go to the app store and search for pintair screen logic. Now select the screen logic configMoreSo let's go to the app store and search for pintair screen logic. Now select the screen logic config app. And once it is installed tap the open. Button.
Can't connect to ScreenLogic?
The simple solution was insert a paperclip into the reset hole on the side of the protocol adapter and click the internal reset button three (3) times. That's right, not just once, but click the reset button 3 times. I waited 30+ seconds, then opened up the Screenlogic Connect software.
Why is my Pentair offline?
If your system shows “Offline”, it means that your system has been disconnected from WiFi for over 60 minutes. Offline status may interrupt notifications and data exchange between the sensor and the app. Once WiFi connection has been restored, your Pentair Home app will automatically reconnect the sensor.
How do I reset my Pentair easy touch?
0:080:37EasyTouch- Erase EEPROM - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo restore the easy touch to the factory default. Press the menu button and press down until you getMoreTo restore the easy touch to the factory default. Press the menu button and press down until you get to settings. Press select and press up until you get to erase AEP.