How do I unlock my KitchenAid food processor?
- Press the off button located on the front of the KitchenAid food processor to turn the appliance off.
- Turn the cover of the KitchenAid food processor counterclockwise to unlock it.
- Lift the cover straight up to remove it from the KitchenAid food processor.
- Remove the Work Bowl Cover and unlock the Work Bowl from the base so that it spins freely.
- Gently pull up on the Work Bowl while rotating it around the motor shaft.
- This will place pressure on the bottom of the blade and may dislodge the blade from the shaft.
How do I unlock my KitchenAid dishwasher door?
You can unlock the door again through a sequence of button presses. If that doesn't work, resetting the hardware may help. Kitchenaids also have a couple of parts that lock, such as the rinse aid cap and filter. When you need clean dishes, unlock each part to set up the perfect wash cycle.
How do you unlock a lock on a rinse aid dispenser?
Rotate the cap counterclockwise if the rinse aid chamber locks. A locking rinse aid chamber looks a lot like a dial. Initially, the cap on the dispenser will point toward the word “lock” printed above it. Give the cap a ¼ turn counterclockwise to unlock it.
Why does my KitchenAid dishwasher lock?
Since you most likely use your dishwasher often, you may come across a problem where the controls lock. Kitchenaid dishwashers have a safety lock to prevent children from changing the settings during a wash cycle. You can unlock the door again through a sequence of button presses.
Where is the rinse aid dispenser on a Whirlpool dishwasher?
Locate the cap next to the detergent tray inside the front door. Lower the dishwasher door all the way down. The dispenser panel will either be in the center of the door or to one side. Look for a round cap next to a separate opening meant to hold dishwashing detergent. The cap is used to hold and dispense a liquid rinse aid during a wash cycle.
How do I unlock my food processor?
Pour near-boiling water into the bowl to just above the blade. This will loosen the bowl and melt any dried food material that may be causing it to stick. Press the pulse button a few times with the hot water in the bowl (and the lid on). Then remove the lid and try to remove the bowl again.
Where is the reset button on KitchenAid food processor?
How Do I Reset My KitchenAid Food Processor?Locked motor - simply press the Off/Pulse button.Overheated motor - let the food processor cool for 15 to 30-minutes. Disengage the bowl from the base and unplug the food processor. Plug-in the processor, realign the bowl onto the base and start again.
How do I reset my food processor?
0:521:58How to perform a motor reset on your Cuisinart food processor! - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd there's an activator button right here i'm going to hold the activator button down with theMoreAnd there's an activator button right here i'm going to hold the activator button down with the pencil. And at the same time i'm going to press the on button.
Why is my KitchenAid food processor not working?
Troubleshooting for KitchenAid Compact Food Processor Is the Food Processor plugged in? Make sure that the bowl and lid are properly aligned and locked in place. Have you pressed more than one button at the same time? Unplug the Food Processor, then plug it back into the outlet.
Why is food processor not working?
0:001:06Food Processor not working. Correct assembly. - YouTubeYouTubeStart of suggested clipEnd of suggested clipNumber one is that the bulb is on correctly the handle has to be to the front. The food processor.MoreNumber one is that the bulb is on correctly the handle has to be to the front. The food processor. Won't work if the handles at the back. So the handle face to the front.
How do I turn on my KitchenAid mini food processor?
0:011:28How to use KitchenAid® 3.5 Cup Mini Food Chopper - YouTubeYouTubeStart of suggested clipEnd of suggested clipUntil the lid and bowl handles line up fully slide the chopped puree lever to your desired setting.MoreUntil the lid and bowl handles line up fully slide the chopped puree lever to your desired setting. And press down on the pulse on button to start the mini food processor.
How do I use my KitchenAid food processor?
0:001:07How To Use The KitchenAid® 7-Cup Food Processor Plus - YouTubeYouTubeStart of suggested clipEnd of suggested clipWith the feed tubes removed attach. The lid by inserting the latch into the slot on the work ballMoreWith the feed tubes removed attach. The lid by inserting the latch into the slot on the work ball handle close the lid and push the lid hinge down into the lock position to start processing press.
Is there a reset button on Cuisinart food processor?
Most Cuisinart food processors have a reset button, so all you have to do is press that button to reset it.
How do you lock the lid on a Cuisinart food processor?
8:4316:29Cuisinart Elite Collection Food Processor How-To Video - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt consists of two parts the large pusher and the small pusher which is secured with a snap fitMoreIt consists of two parts the large pusher and the small pusher which is secured with a snap fit mechanism.
How do I reset my KitchenAid blender?
If the Blender is plugged in but will not start and one light is flashing alternately from all the other indicator lights, the Blender may have a stuck key. Press POWER to turn off the Blender, then unplug the Blender. Plug the Blender back in and press POWER to turn back on to reset the stuck key.
Why is my food processor blade not spinning?
One of the most common reasons the blade stops spinning is that there's too much food in the container. The blades don't have enough room to spin when the container is overfilled, and food can get trapped under the blade. After food gets trapped under the blade, the blade will lose its mobility.
How do I use a food processor?
7:399:0712 Easy Ways to Use a Food Processor | Kitchen EssentialsYouTubeStart of suggested clipEnd of suggested clipUp first we'll use the shaving or slicing part of the blade. Which is the longer end and we'll justMoreUp first we'll use the shaving or slicing part of the blade. Which is the longer end and we'll just put our food down the chute. And then if you need some help pushing it down you can use the insert.