How do I turn off the chime on my DSC alarm?
- Go to your home alarm's keypad and enter the code you were given that shuts off the alarm. This code is given to you when you first have the alarm ...
- Go to your alarm's transformer box and remove the battery.
- Go to your home's circuit breaker.
- Flip off the switch and your alarm will shut off.
How do I set the chime on my DSC alarm?
Locate the main access panel of your home alarm system. Remove the AC power to the home alarm console from the wall directly. Use your console's access key (or another item such as a small screw) to unlock and open the system's backing. Keeping this in view, how do I set the chime on my DSC alarm?
How do I Turn Off the chime on my alarm system?
Each alarm system has a different process for turning off the chime. However, the appropriate setting is usually found within the volume menu for the control panel. Since each system follows a different process for turning off the chime, a user will need to follow the steps specific for their system.
How do I toggle the chime function on a DSc impassa?
There are two ways to toggle the chime function on a DSC Impassa. The first way is to press and hold the "Chime" button on the keypad for two seconds. The second way is to enter the command [*] [4]. If the system produces three consecutive beeps, then chime has been toggled to On.
How do I Reset my DSC security system?
How do I reset my DSC alarm? Open the access door on the unit. Press and hold the "RESET" key for 2 seconds. Press the buttons "*72" if the alarm does not reset after pressing the RESET button. Check the sensors if it still does not turn off.
How to activate chime on DSC Impassa?
You can activate the chime on a DSC Impassa by toggling the chime setting to On. To toggle the chime, either press and hold the "Chime" button on the keypad, or enter in the command
- ] [4]. The system will make a particular sound depending on whether the chime has been set to On or Off.
How to turn on a door chime?
To turn on the Door Chime, press and hold the Chime button on the keypad for 2 seconds. You can also press . To turn off the chimes, press the same buttons again.
What happens when you flip off the switch on your alarm?
Flip off the switch and your alarm will shut off.
How to turn off chime on alarm?
You can turn the chime off on your alarm system by following the steps specific to the type of system that is being used. Each alarm system has a different process for turning off the chime. However, the appropriate setting is usually found within the volume menu for the control panel. Since each system follows a different process ...
How to turn off chime on DSC Impassa?
There are two ways to toggle the chime function on a DSC Impassa. The first way is to press and hold the "Chime" button on the keypad for two seconds. The second way is to enter the command
- ] [4]. If the system produces three consecutive beeps, then chime has been toggled to On. If the system produces one long continuous tone, then chime has been toggled to Off.
How to turn off chime on Honeywell Lyric Controller?
From the main screen, select Settings. Press the "Chime" button, which is below the volume bar and to the left of the "Clean" button. If the button has a blue background, then chime is on. If it has a white background, chime is off.
How to turn off chime on Qolsys IQ?
Qolsys IQ Panel 2. Press the small grey bar at the top of the home screen. Choose Settings > Advanced Settings > enter the Installer Code (default 1111) > Sound. Then scroll down to Chime Settings.
How to turn off chime on alarm?
Furthermore, how do I turn off the chime on my alarm? Choose Settings > Advanced Settings > enter the Installer Code (default 1111) > Sound. Then scroll down to Chime Settings. Uncheck the box next to "All Chimes". This will disable the chimes for the system.
What is a chime on a security system?
A chime refers to an audible tone that a security panel and/or keypad produces when certain types of system zones are activated. This tone can be helpful for letting a user know that an activity has occurred on their security system, such as a door or window being opened. How do I reset my DSC alarm?