- Find the Tension Adjust Mechanism. You can adjust the shutter tension in plantation shutters with either screws located on several of the louvers, or by small nylon ...
- Adjust the Tension Screws a Pair at a Time. You can tighten the tension screws on the shutters by turning them once fully clockwise on each side.
- Adjust the Tension Pins. Find each of the nylon tension pins and, using a pair of needle-nose pliers, turn the pins slightly clockwise to tighten them.
- Check the Staples in the Tilt Rod. Examine the shutter tilt rod. If some staples have fallen out, re-staple the tilt rod with metal staples.
How to refinish wooden plantation shutters?
Things You'll Need
- Pressure washer
- Low-pressure tip
- 180-grit sandpaper
- 220-grit sandpaper
- Palm sander
- Professional painter's tape
- Drop cloths
- 3- to 4-inch oil paintbrush
- Oil-based stain
- Mineral spirits
How to choose the correct plantation shutters?
Top 4 Considerations When Choosing Plantation Shutters for a Modern Living Room
- The Shutter Company. When shopping for plantation shutters, it’s essential to consider where you’re buying from. ...
- Style. Plantation shutters come in various styles, so it’s essential to find the right one that will complement the look and feel of your living room.
- Your Needs. ...
- Budget and Quality of Materials. ...
How to hang curtains over plantation shutters?
How to Hang Curtains Over Plantation Shutters
- Measure the window width from the outside edge of the left shutter to the outside edge of the shutter on the right.
- Tilt the plantation shutters into the fully open position, with the slats parallel to the windowsill.
- Divide the Step 1 window width measurement by 2. ...
How to clean interior plantation shutters?
Method 2 Method 2 of 3: Removing Dirt and Grime
- Fill a bowl with white vinegar. White vinegar can be used to wipe any stains off of plantation shutters.
- Wet a sock or cotton glove. For easiest cleaning, you will wipe down your shutters with a sock or cotton gloves.
- Wipe down the shutters. Place your sock or glove over your hand. ...
- Keep wiping until your socks or gloves run clean. ...
How do you tighten plantation shutter louvers?
0:001:00Wood Shutter Louver Tension Adjustment - YouTubeYouTubeStart of suggested clipEnd of suggested clipNext hold the louver with one hand and insert a Phillips head screwdriver into the access hole whileMoreNext hold the louver with one hand and insert a Phillips head screwdriver into the access hole while holding the louver turned the tension screw a quarter of a turn no more than that to begin with.
Why won't my plantation shutters stay closed?
Locate the hole on each side of the shutter panel. Inside the hole is a screw called the “tension screw.” 2) Using a Philips head screwdriver, turn the screw ¼ turn to the right to tighten the louvers or ¼ turn to the left to loosen them. Be sure to adjust the screws on both sides of the panels.
Why do plantation shutters sag?
Plantation shutters provide outstanding control over the amount of light, privacy and air circulation in your house. As time goes by, regular use can result in your shutters sagging or loosening. You can fix this by tightening the tension adjustment screws, but some budget shutters might not have them.
How do you make shutters stay up?
0:050:42Ask the Pros: Help! My Shutters Won't Stay Open - YouTubeYouTubeStart of suggested clipEnd of suggested clipSimple as can be a Philips screwdriver. We have access points at both sides very important toMoreSimple as can be a Philips screwdriver. We have access points at both sides very important to tighten both sides it's the slightest.
How do you tighten loose vinyl shutters?
If the shutter was ripped from the house, the holes may be stripped. Screw a two-inch weatherproof deck screw into each hole to ensure there is still “bite” to the hole. If the screw slips right in, fill the hole with wood filler. Use a Philips head screwdriver to insert the filler into the hole.
How do you change a shutter pin?
0:561:52Remove Shutter Spikes & Replace Vinyl Shutters - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo extract the spike base grip with pliers. And pull alternatively use diagonal cutting pliers toMoreTo extract the spike base grip with pliers. And pull alternatively use diagonal cutting pliers to sever the remaining spike at the face of the siding leaving a portion of the spike.
Do plantation shutters warp in the sun?
They are coated with several layers of UV protectant and sealant (which is also mixed in with the paint or stain color) so they can withstand high heat and direct sunlight without warping or cracking.
How long do PVC shutters last?
Longevity of Shutters PVC is 3 times heavier than a traditional timber shutter and as UV degradation sets in the panels can warp and drop from the weight. We discovered that windows made from aluminium have an expected life of 45 plus years whilst UPVC windows require replacement around the 25/30 year mark.
How do you lubricate plantation shutters?
Brush away any dust or dirt and place the drop of lubricant or oil at the top of the hinge just under the head of the hinge pin. Then open and close the shutters several times so the lubricant works its way in. This will ensure that your shutters always swing smoothly.
Are plantation shutters a good idea?
Plantation shutters look amazing but will also benefit your home in a few ways. Since they are great at keeping out the light from the sun, they will keep your home cooler during the summer and lower your electric bill. This will also protect your flooring, art, and upholstery from being faded by the sun.
Can you open your windows with plantation shutters?
Plantation shutters give you most flexibility of any window treatment in terms of privacy and control over how much light enters the room. You can rotate the slats open and closed and create separate sections of moving slats by using mid-rails.
Do plantation shutters close up or down?
The correct installation of a fixed louver shutter should have the shutter louvers facing down and towards the back when the shutter is open (when it is not covering the window).
What are plantation shutters?
Plantation shutters have been a popular window treatment for many years. They offer lots of great benefits like sun control and extra insulation, which really comes in handy when the weather turns super cold like it has been lately.
Why are wood shutters better than vinyl shutters?
I’m a big fan of wood shutters because they are usually lighter weight than vinyl or made-made products, which means less problems with panels sagging, especially in larger windows. Another big advantage wood shutters have over vinyl/plastic shutters is that normally man-made panels do not have a way to adjust or tighten the louvers ...
Where are the tension adjustment screws on bifold panels?
Just open back your bi-fold panels and you should see holes where the tension adjustment screws are hidden in between the panels. Some manufacturers may put the tension adjustment screw on the outside edge of the panel, but most hide it inside the panel where it isn’t visible.
Do louvers loosen up over time?
It’s pretty inevitable that louvers will eventually start to loosen up over time due to everyday use. There are a few shutters out there that have springs built into the panels. I’ve always shied away from those because if the spring goes bad, there’s usually nothing you can do but replace the whole panel.
How to Adjust and Operate Plantation Shutters
Plantation shutters can add beauty, efficiency, and durability to your windows in a way that you simply can’t experience with any other window treatment. However, if you’re interested in plantation shutters, you have to keep in mind that they don’t function the same way other window treatments do.
Opening and Closing
Plantation shutters are hinged at the side of your windows, so they function somewhat like a door. Often, there are two plantation shutters that meet in the middle. These both open towards yourself and close just as easily.
Adjusting Your Shutters
Plantation shutters have the same sort of mechanism for adjusting the louvers that blinds have: a tilt rod. The general purpose of a tilt rod is to turn the rod, which will then tilt the louvers up or down to adjust the amount of sunlight that comes into the room. Shenandoah Shutters offers a range of tilt rod options for your plantation shutters:
Differences Between Different Types of Shutters
There are a few different types of plantation shutters, and each look a little different. Operation is generally the same, but they may offer different levels of coverage or sunlight filtration. The first and most common is the traditional plantation shutter. Full-length and stately, this is the “grandfather” of plantation shutters.
3 Common Plantation Shutter Issues and How To Fix Them
Plantation shutters are simply the best window treatment option you can find in today’s market. They’re beautiful, durable, made from natural materials, and relatively low maintenance. However, that doesn’t mean that time or the environment around your shutters won’t wear down on those shutters.
Loose Louvers
The slats of your plantation shutters are called louvers. Ideally, they can be adjusted by your tilt wand to let in as much or as little light as you’d like. However, louvers can become loose with frequent use, as can anything else. When this happens, they can slide back down even when they’re lifted.
Crooked Louvers
Another issue is that your louvers can become crooked or misaligned. This can happen especially if you have pets or children who tend to be precocious. Most plantation shutters have small plastic pins that hold the slats in place with the tilt wand so as to keep from falling out of alignment.
Broken Frames or Louvers
A small break in the louvers may be able to be fixed with wood glue, though it will never look quite “good as new.” A more extensive break to the louvers will likely require a replacement louver. You can contact your plantation shutter manufacturer and ask them to come out to do the job.
Opening and Closing
Adjusting Your Shutters
- Plantation shutters have the same sort of mechanism for adjusting the louvers that blinds have: a tilt rod. The general purpose of a tilt rod is to turn the rod, which will then tilt the louvers up or down to adjust the amount of sunlight that comes into the room. Shenandoah Shutters offers a range of tilt rod options for your plantation shutters: ...
Differences Between Different Types of Shutters
- There are a few different types of plantation shutters, and each look a little different. Operation is generally the same, but they may offer different levels of coverage or sunlight filtration. The first and most common is the traditional plantation shutter. Full-length and stately, this is the “grandfather” of plantation shutters. There are also cafe shutters, however, that only cover the lo…