- Remove the receiver collar from your pet.
- Remove the battery from the receiver collar.
- At the transmitter, move the boundary switch from the low to the high position.
- Slowly adjust the boundary control dial up to #8, down to #1 and then back to the #4 position.
How does a wireless pet fence work?
The base unit sends out a circular signal to create the wireless fence. Before placing the base unit, it is important to determine the desired pet area. The High and Low switch correlates with the amount of coverage needed for the pet area. Controls the distance between the boundary and base unit depending if it is set to high or low.
How long does it take to set up a wireless dog fence?
to your new PetSafe® Wireless Pet Containment System. Setting up the wireless fence should take less than a day. A minimum of 14 days of training is recommended. Environmental factors, such as metal sheds, may effect the fence signal. Base unit must be placed indoors.
Are wireless fences safe for dogs?
Petsafe wireless fences are becoming a standard solution for most dog owners. This safe and convenient way of protecting dogs ad keeping them in their owner’s yards is a sure way of keeping them safe from issues outside the safety zone.
Is your PetSafe fence malfunctioning?
PetSafe fence owners are not immune to challenges and malfunctions that may occur when using the fence. Regardless of the difference in brands and quality differences, all PetSafe fence users tend to experience the same challenges that are caused by malfunctions.
How do I connect my PetSafe collar to my transmitter?
0:001:02How To Adjust Range and Sync Collar PetSafe Wireless Pet Containment ...YouTubeStart of suggested clipEnd of suggested clipControl here and you're going to put it all the way down to number one now I know you can't see theMoreControl here and you're going to put it all the way down to number one now I know you can't see the numbers but there's numbers on side on the side so just scroll. It all the way to the bottom.
How do I reset my pet safe wireless fence?
How do I reset my PetSafe wireless collar? Simply remove the battery and hold down the power button for a few seconds after the LED indicator has gone out. Then, replace the battery, with a fresh one if need be, and turn the collar on again.
Why is my PetSafe wireless fence not working?
The light may come on and fade out. Place the battery back into the collar and twist to lock. Confirm that the collar powers on. If the collar does not power on, replace the battery with a new RFA-67 battery.
How do I sync my shock collar to my remote?
1:003:41GUIDE: How to Setup Your K9konnection Training CollarYouTubeStart of suggested clipEnd of suggested clipTransmitter. Once it's on select either channel one or two at this point you want to poke yourMoreTransmitter. Once it's on select either channel one or two at this point you want to poke your starting pin through the reset hole of the receiver collar. And press the inner button gently.
How do you reset an Invisible Fence after a power outage?
0:000:41Invisible Fence Brand Unplugging Transmitter - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll you need to do is pop the top bulb. Here. There's a little battery backup just pull the tab. AndMoreAll you need to do is pop the top bulb. Here. There's a little battery backup just pull the tab. And that will shut everything off and just continue the horrible sound.
How do you reprogram an Invisible Fence collar?
A light on the receiver will flash. Push the button again within five seconds of the first push and the light will flash from one to five times. That will tell you the current correction level. Push it again within five seconds and the correction level will change.
Why is my electric dog fence not working?
If your Invisible Fence control panel is beeping with a lengthy pause between each beep, it's possible your backup battery unit needs to be replaced. Your fence will still work, but if your power goes out, the system will no longer be operational until power is restored.
Why isn't my Invisible Fence collar working?
Replace the Batteries If you hear the warning, but no light flashes, replace the battery. If you don't have a tester, replace the battery and carry the collar past the boundary. If the problem was a dead battery, the collar should work properly when you approach the hidden boundary wire.
Why is the red light flashing on my PetSafe collar?
Why is my Invisible Fence collar blinking red? If you have started to see a red flashing light on your pet's Computer Collar unit, your Power Cap battery may need to be replaced. You can order replacement batteries online, from your local dealer, or by calling 1-800-824-3647.
How do you pair a dog collar with a remote control?
Match the Remote Control to the Receiver: Connect the Receiver to a power source via the USB cable, matching mode can only be activated during charging. Press and hold Channel Switch / Match Button for 5 secs. The Receiver will vibrate and beep which indicates the matching is complete.
How do you sync a pet trainer collar?
1:283:58Petrainer PET998DBB 2 Electronic Dog Training Collar IntroductionYouTubeStart of suggested clipEnd of suggested clipThe 1 2 button and switch to channel 2 do the exact same thing turn it on and then press and holdMoreThe 1 2 button and switch to channel 2 do the exact same thing turn it on and then press and hold the power button 5 seconds. It beeps and then you press the Y button on your remote.
Why is my petsafe collar not working?
If Receiver Collar does not beep and the Test Light does not flash, replace the 10. battery in the Receiver Collar. If it still does not beep and the Test Light does not flash, contact the Customer Care Center at 1-800-732-2677. If the Receiver Collar beeps, there may be a complete or partial break in the 11.
How to add a receiver collar to a fence?
To add the collar to the fence, consider doing this during the training period. You need to place the receiver collar on the pet’s neck. Alternatively, hold the collar close enough so that the pet hears the beeping of the collar during training.
Why is my PetSafe transmitter not working?
Whenever you suspect that something could be amiss, it is advisable to take the collar’s battery out for a few minutes before returning it. If it is still faulty, replace it with a new battery, ensuring to install it properly.
How to tell if a fence is amiss?
The first sign to hint that something is amiss is when the fence fails to deliver as expected, and the dogs can easily go beyond the restricted area . When this happens, there is a need to assess and find a solution to the issue.
Why does my dog wander away from the boundary?
When the connection is right, some vibrations occur in the animal’s neck area, preventing it from crossing the boundary. When the vibrations/shock fails, the animal can wander away beyond its safe area. If you notice this happening frequently, then check the issue that could be resulting from it.
Can you replace a dog collar if it is not working?
You can replace them if they are not working as expected. However, the issue can also happen in reverse, whereby the pet’s safety is compromised because the impact of the fence is too strong. In such cases, it is advisable to set the collar at a minimum level and consider applying minimum corrective measures.
Do PetSafe fences come with warranties?
Note that most PetSafe fences come with warranties and quality assurances that are meant to assure users. You may need to apply this in case all attempts to get the collar working fail. However, you should only resort to changing the collar after failed attempts of increasing shock vibration levels.
Is PetSafe fence safe?
PetSafe fence owners are not immune to challenges and malfunctions that may occur when using the fence. Regardless of the difference in brands and quality differences, all PetSafe fence users tend to experience the same challenges that are caused by malfunctions. This means that learning how best to troubleshoot these issues should be your priority. Fortunately, most of the issues are easy to resolve. Some of the most common problems include: