Receiving Helpdesk

how do i reset the alarm on my kenmore freezer

by Mrs. Kaci Aufderhar Published 3 years ago Updated 2 years ago

How do I reset the alarm on my Kenmore freezer?

  • Locate the control panel on the front of your refrigerator.
  • View the control panel and locate the "Alarm/Lock" button on the far-right side of the control panel.
  • Press the "Alarm/Lock" button on the control panel one time to turn off the door alarm beep.

Full Answer

How do I reset the alarm on my Kenmore freezer?

  • Locate the control panel on the front of your refrigerator.
  • View the control panel and locate the "Alarm/Lock" button on the far-right side of the control panel.
  • Press the "Alarm/Lock" button on the control panel one time to turn off the door alarm beep.

How do I Reset my Kenmore freezer?

How do I reset my Kenmore Elite deep freezer? Unplug the freezer for 1 minute to reset the electronic control board and then plug the freezer back in. If the code returns, replace the user interface control. The thermistor is the temperature sensor inside the freezer. Unplug the freezer and check the thermistor wire harness for damage or a ...

Do Kenmore refrigerators have a reset button?

Where Is the Reset Button on a Kenmore Refrigerator? The reset button on a Kenmore refrigerator is located on the right side of the ice maker. It is a rectangular rubber button that is visible enough for everyone to see. How to Reset a Kenmore Refrigerator Control Board. Reset the control board of this unit by completely disconnecting it from electrical power for 5 minutes.

How to troubleshoot a Kenmore upright freezer?

In this case, there are a number of potential causes you'll have to check, including:

  • Dirty Condenser Coils
  • Evaporator Coils Frosted Over
  • Sealed System Leak
  • Fan Motors
  • Thermostat
  • Part Maintenance or Replacement

How do you reset a Kenmore freezer?

You can reset the thermostat for your Kenmore appliance by pressing the off switch in a refrigerator or freezer. The off switch will be in a different place other than the control board. Unplug the appliance, locate and press the switch, and connect it back to power. This should help your freezer cool more effectively.

How do I reset my freezer alarm?

First, make sure the door is closed and check to see if your food is frozen. Next, try unplugging the unit for 30 seconds to reset it. If this does not help, we recommend service.

Why does my Kenmore freezer beep?

This is a door alarm signal, that indicates the door is not closed good. Now if the door is closed good, push in on the door for a few seconds to see if the beeping stops. If it does, it could mean the door is not making proper contact with the light switch or the switch has failed.

How do you reset a freezer after a power outage?

To reset your chest freezer back again after a power failure, press the reset button and hold both Up and Down arrows simultaneously as you plug back the outlet cord.

Why does the alarm on my freezer keep going off?

Make sure the fridge or freezer door is not open for a prolonged period of time as the temperature can suddenly rise, causing the alarm to engage. Make sure the door is sealed shut as any gaps or bulges can allow warm air to enter, thus triggering the alarm.

What do you do when your freezer alarm goes off?

Contents show1 Make Sure the Refrigerator and Freezer Are Not Overheating.2 Look at the Air Vents To Make Sure They Are Not Blocked.3 See if the Freezer Has To Be Defrosted.4 Make Sure it Is Not Overfilled.5 Take a Close Look at the Door Seals.6 Check the Balance of the Appliance.7 Call a Professional.More items...

How do I reset my Sears Kenmore refrigerator?

To reset the control panel of the Elite, simply turn off the breaker of the refrigerator or unplug it from the power outlet. Plug it back into the power outlet or turn on the breaker again. This resets the control panel.

Where is the alarm reset button on a Frigidaire freezer?

You can still stop the alarms when they sound by fixing the problem that caused them or pressing the "set" or "alarm reset" button on your unit. On upright refrigerators and freezers, you'll find this button on the top right side of the control panel on the front of the unit.

How do I reset my fridge freezer?

1:132:36Refrigerator Troubleshooting, Hard Reset, and Liquid Temperature ...YouTubeStart of suggested clipEnd of suggested clipIf the cause of your issue is still a mystery you'll want to try what is called a hard reset unplugMoreIf the cause of your issue is still a mystery you'll want to try what is called a hard reset unplug your unit from the wall for 30 to 45. Minutes then plug the unit back in this will reset the unit.

Why is my Kenmore freezer not working?

Be sure the door still seals adequately. With a Kenmore upright freezer, the most common problem is when the freezer stops working — meaning the freezer is failing to freeze the food items inside of it. In this case, there are a number of potential causes you'll have to check, including: Dirty Condenser Coils. Evaporator Coils Frosted Over.

How long does a Kenmore freezer last?

A Kenmore upright freezer has a life expectancy of between 12 and 20 years, with an average of 16 years, according to Mr. Appliance. It should continue to perform admirably throughout its life. However, normal wear and tear can introduce unintended problems.

Why does my freezer defrost?

Freezer units have a freezer defrost cycle to evaporate any frost buildup from the evaporator coils to keep them working efficiently. If the defrost heater has stopped working, frost will build up over the surface and prevent the heat exchange from taking place. You'll want to check for continuity in the defrost heater and replace as necessary.

What happens if the condenser fan stops working?

If either fan stops working, its related part will not be able to operate efficiently and eventually cooling power will be lost.

What parts of a refrigerator wear out over time?

Part Maintenance and Replacement. A number of internal parts can wear out over time. These include the start relay, control boards, compressor and other pieces that can wear or fail during the refrigerator's normal life and need replacement.

Can you troubleshoot an upright freezer?

You might need to troubleshoot your upright freezer. Image Credit: Hinterhaus Productions/DigitalVision/GettyImages. An upright freezer is a great addition to households that like to cook large meals and freeze leftovers, buy meat on sale and freeze for later or create their own canned goods and freeze until ready.

What does it mean when your freezer is too warm?

Many upright freezers have a high temperature alarm that signals when the freezer temperature is above 20 degrees F. For upright freezers with a control panel on the front of the door, if the temperature is too warm you will see High Temp on the display and hear an alarm.

What happens if you press the door open button but it is not closed?

If Door Open has been pressed but the door has not been closed, Door Open will continue to be displayed on the control panel until the door has been closed. If you pressed Door Open and the door is still open 10 minutes later, the Door Open alarm will sound again.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9
8.3.21PHP Version320msRequest Duration2MBMemory UsageGET {post}Route
  • warninglog[02:35:10] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[02:35:10] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[02:35:10] LOG.warning: Callables of the form ["Swift_SmtpTransport", "Swift_Transport_EsmtpTranspor...
  • warninglog[02:35:10] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[02:35:10] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[02:35:10] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[02:35:10] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[02:35:10] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[02:35:10] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • Booting (12.01ms)
  • Application (308ms)
  • 1 x Application (96.14%)
    307.55ms
    1 x Booting (3.76%)
    12.01ms
    7 templates were rendered
    • themes.DevBlog.content.post (resources/views/themes/DevBlog/content/post.blade.php)34blade
      Params
      0
      post
      1
      postContent
      2
      author
      3
      updated_at
      4
      bing_rich_snippet_text
      5
      bing_rich_snippet_link
      6
      bing_related_keywords
      7
      google_related_keywords
      8
      bing_news_title
      9
      bing_news_description
      10
      bing_videos
      11
      bing_images
      12
      bing_search_result_title
      13
      bing_search_result_description
      14
      bing_search_result_url
      15
      bing_paa_questions
      16
      bing_paa_answers
      17
      bing_slider_faq_questions
      18
      bing_slider_faq_answers
      19
      bing_pop_faq_questions
      20
      bing_pop_faq_answers
      21
      bing_tab_faq_questions
      22
      bing_tab_faq_answers
      23
      google_faq_questions
      24
      google_faq_answers
      25
      google_rich_snippet
      26
      google_search_result
      27
      indexedArray
      28
      total_images
      29
      total_videos
      30
      settings
      31
      url_current
      32
      menus
      33
      sidebar
    • themes.DevBlog.layouts.master (resources/views/themes/DevBlog/layouts/master.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.head (resources/views/themes/DevBlog/panels/head.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.header (resources/views/themes/DevBlog/panels/header.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.navbar (resources/views/themes/DevBlog/panels/navbar.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.footer (resources/views/themes/DevBlog/panels/footer.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.scripts (resources/views/themes/DevBlog/panels/scripts.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    uri
    GET {post}
    middleware
    web, checkdate
    as
    post.show
    controller
    App\Http\Controllers\Frontend\json_data\PostController@show
    namespace
    where
    file
    app/Http/Controllers/Frontend/json_data/PostController.php:18-166
    7 statements were executed290ms
    • select * from `posts` where `published_at` <= '2025-06-16 02:35:10' and `slug` = 'how-do-i-reset-the-alarm-on-my-kenmore-freezer' and `posts`.`deleted_at` is null limit 1
      2.59ms/app/Providers/RouteServiceProvider.php:54receivinghelpdeskask
      Metadata
      Bindings
      • 0. 2025-06-16 02:35:10
      • 1. how-do-i-reset-the-alarm-on-my-kenmore-freezer
      Backtrace
      • 15. /app/Providers/RouteServiceProvider.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/Router.php:842
      • 19. Route binding:39
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/framework/src/Illuminate/Foundation/Http/Middleware/VerifyCsrfToken.php:78
    • select * from `json_post_contents` where `json_post_contents`.`post_id` = 208503 and `json_post_contents`.`post_id` is not null and `rewrite_id` = 0
      9.46msmiddleware::checkdate:30receivinghelpdeskask
      Metadata
      Bindings
      • 0. 208503
      • 1. 0
      Backtrace
      • 19. middleware::checkdate:30
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/jetstream/src/Http/Middleware/ShareInertiaData.php:61
      • 22. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/Middleware/SubstituteBindings.php:50
    • select * from `nova_menu_menus` where `slug` = 'header' limit 1
      720μs/vendor/outl1ne/nova-menu-builder/src/helpers.php:32receivinghelpdeskask
      Metadata
      Bindings
      • 0. header
      Backtrace
      • 15. /vendor/outl1ne/nova-menu-builder/src/helpers.php:32
      • 17. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 19. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
      • 20. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:205
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`menu_id` = 1 and `nova_menu_menu_items`.`menu_id` is not null and `parent_id` is null order by `parent_id` asc, `order` asc, `name` asc
      430μs/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Bindings
      • 0. 1
      Backtrace
      • 19. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 20. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 22. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 24. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`parent_id` in (1) order by `order` asc
      360μs/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Backtrace
      • 24. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 25. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 27. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 28. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 29. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select `id`, `post_title`, `slug` from `posts` where `status` = 'publish' and `posts`.`deleted_at` is null order by RAND() limit 10
      275ms/app/View/Composers/SidebarView.php:22receivinghelpdeskask
      Metadata
      Bindings
      • 0. publish
      Backtrace
      • 14. /app/View/Composers/SidebarView.php:22
      • 15. /app/View/Composers/SidebarView.php:12
      • 16. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:124
      • 17. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:162
      • 20. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:177
    • select * from `fake_users` where `fake_users`.`id` = 44912 limit 1
      650μsview::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15receivinghelpdeskask
      Metadata
      Bindings
      • 0. 44912
      Backtrace
      • 21. view::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15
      • 23. /vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:108
      • 24. /vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
      • 25. /vendor/livewire/livewire/src/ComponentConcerns/RendersLivewireComponents.php:69
      • 26. /vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:61
    App\Models\FakeUser
    1
    Outl1ne\MenuBuilder\Models\MenuItem
    1
    Outl1ne\MenuBuilder\Models\Menu
    1
    App\Models\JsonPostContent
    1
    App\Models\Post
    11
        _token
        uq26TEn1q7sIaOWGkCdJFuLTkMt0RQY2xStoDa5K
        _previous
        array:1 [ "url" => "https://receivinghelpdesk.com/ask/how-do-i-reset-the-alarm-on-my-kenmore-freez...
        _flash
        array:2 [ "old" => [] "new" => [] ]
        PHPDEBUGBAR_STACK_DATA
        []
        path_info
        /how-do-i-reset-the-alarm-on-my-kenmore-freezer
        status_code
        200
        
        status_text
        OK
        format
        html
        content_type
        text/html; charset=UTF-8
        request_query
        []
        
        request_request
        []
        
        request_headers
        0 of 0
        array:25 [ "cookie" => array:1 [ 0 => "_pk_id.64.7c30=cb6d287162d2b286.1750021487.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6InF5T3FSWmdrUFdHczZKYTNOM3oxN0E9PSIsInZhbHVlIjoiSE1aREQyVmhMeVlEK1IzMXEwUWFZU2NkMFZqek9CL3lFbHJzRVVoVUZ5NGdCUjZPVFJJZnNQaXJMa1phYmdmc25GbVlIbW9aSXNNNXc3V3ByMFZiVnpWRjhhTjZqN1VkaVpVMVVhSXNZQ3lwR3FpcmNrVG4xSWtRcEliaFd1ZkoiLCJtYWMiOiI2YjQ2ZGRhNmI5YTBkZjZlMmQ0YTI0YTM3NjY2MDU3MTNiODRkNzg4YmFmNjYyNTA2NTExZTY3YjdmOTNjNjM0IiwidGFnIjoiIn0%3D; askhelpdesk_session=eyJpdiI6InFhRnlqVWhaYlBBeFgxeW9XcFJhcXc9PSIsInZhbHVlIjoib0paN3IyM0QyK3RnRXI0MmY4NWowT1F0QU5TbUFuRGNPZm90VUtlYm8wYmszUWJLVVhSYzNPbHpsQnJmdlZrTGlFVTdBVXArYnRhVDQ5WWEweGRsRXFkSUNITTVENURTaExqR3pmSlVwRnNnemZjQXBnV1VuaE9pTGE3SlM0TGwiLCJtYWMiOiJlMDU0OTQ4Y2JhNjQ2YTk4ZDAyNWVjNDdmZDY0ZWQ3ZTkwZjE4NDg5ZDlmYWFhN2I1ZmY1OTJlMWEwMGEzZjAxIiwidGFnIjoiIn0%3D_pk_id.64.7c30=cb6d287162d2b286.1750021487.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6InF5T3FSWmdrUFdHczZKYTNOM3oxN0E9PSIsInZhbHVlIjoiSE1aREQyVmhMeVlEK1IzMXEwUWFZU" ] "cf-ipcountry" => array:1 [ 0 => "US" ] "cf-connecting-ip" => array:1 [ 0 => "216.73.216.208" ] "cdn-loop" => array:1 [ 0 => "cloudflare; loops=1" ] "sec-fetch-mode" => array:1 [ 0 => "navigate" ] "sec-fetch-site" => array:1 [ 0 => "none" ] "accept" => array:1 [ 0 => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" ] "user-agent" => array:1 [ 0 => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" ] "upgrade-insecure-requests" => array:1 [ 0 => "1" ] "sec-ch-ua-platform" => array:1 [ 0 => ""Windows"" ] "sec-ch-ua-mobile" => array:1 [ 0 => "?0" ] "sec-ch-ua" => array:1 [ 0 => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" ] "cache-control" => array:1 [ 0 => "no-cache" ] "pragma" => array:1 [ 0 => "no-cache" ] "accept-encoding" => array:1 [ 0 => "gzip, br" ] "cf-ray" => array:1 [ 0 => "95050625ca70e82e-ORD" ] "priority" => array:1 [ 0 => "u=0, i" ] "sec-fetch-dest" => array:1 [ 0 => "document" ] "sec-fetch-user" => array:1 [ 0 => "?1" ] "cf-visitor" => array:1 [ 0 => "{"scheme":"https"}" ] "connection" => array:1 [ 0 => "close" ] "x-forwarded-proto" => array:1 [ 0 => "https" ] "x-forwarded-for" => array:1 [ 0 => "216.73.216.208, 172.71.254.96" ] "x-server-addr" => array:1 [ 0 => "154.12.239.204" ] "host" => array:1 [ 0 => "receivinghelpdesk.com" ] ]
        request_server
        0 of 0
        array:56 [ "USER" => "runcloud" "HOME" => "/home/runcloud" "SCRIPT_NAME" => "/ask/index.php" "REQUEST_URI" => "/ask/how-do-i-reset-the-alarm-on-my-kenmore-freezer" "QUERY_STRING" => "" "REQUEST_METHOD" => "GET" "SERVER_PROTOCOL" => "HTTP/1.0" "GATEWAY_INTERFACE" => "CGI/1.1" "REDIRECT_URL" => "/ask/how-do-i-reset-the-alarm-on-my-kenmore-freezer" "REMOTE_PORT" => "52432" "SCRIPT_FILENAME" => "/home/runcloud/webapps/ReceivingHelpDesk/ask/index.php" "SERVER_ADMIN" => "you@example.com" "CONTEXT_DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "CONTEXT_PREFIX" => "" "REQUEST_SCHEME" => "http" "DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "REMOTE_ADDR" => "172.71.254.96" "SERVER_PORT" => "80" "SERVER_ADDR" => "127.0.0.1" "SERVER_NAME" => "receivinghelpdesk.com" "SERVER_SOFTWARE" => "Apache/2.4.63 (Unix) OpenSSL/1.1.1f" "SERVER_SIGNATURE" => "" "LD_LIBRARY_PATH" => "/RunCloud/Packages/apache2-rc/lib" "PATH" => "/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" "HTTP_COOKIE" => "_pk_id.64.7c30=cb6d287162d2b286.1750021487.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6InF5T3FSWmdrUFdHczZKYTNOM3oxN0E9PSIsInZhbHVlIjoiSE1aREQyVmhMeVlEK1IzMXEwUWFZU2NkMFZqek9CL3lFbHJzRVVoVUZ5NGdCUjZPVFJJZnNQaXJMa1phYmdmc25GbVlIbW9aSXNNNXc3V3ByMFZiVnpWRjhhTjZqN1VkaVpVMVVhSXNZQ3lwR3FpcmNrVG4xSWtRcEliaFd1ZkoiLCJtYWMiOiI2YjQ2ZGRhNmI5YTBkZjZlMmQ0YTI0YTM3NjY2MDU3MTNiODRkNzg4YmFmNjYyNTA2NTExZTY3YjdmOTNjNjM0IiwidGFnIjoiIn0%3D; askhelpdesk_session=eyJpdiI6InFhRnlqVWhaYlBBeFgxeW9XcFJhcXc9PSIsInZhbHVlIjoib0paN3IyM0QyK3RnRXI0MmY4NWowT1F0QU5TbUFuRGNPZm90VUtlYm8wYmszUWJLVVhSYzNPbHpsQnJmdlZrTGlFVTdBVXArYnRhVDQ5WWEweGRsRXFkSUNITTVENURTaExqR3pmSlVwRnNnemZjQXBnV1VuaE9pTGE3SlM0TGwiLCJtYWMiOiJlMDU0OTQ4Y2JhNjQ2YTk4ZDAyNWVjNDdmZDY0ZWQ3ZTkwZjE4NDg5ZDlmYWFhN2I1ZmY1OTJlMWEwMGEzZjAxIiwidGFnIjoiIn0%3D_pk_id.64.7c30=cb6d287162d2b286.1750021487.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6InF5T3FSWmdrUFdHczZKYTNOM3oxN0E9PSIsInZhbHVlIjoiSE1aREQyVmhMeVlEK1IzMXEwUWFZU" "HTTP_CF_IPCOUNTRY" => "US" "HTTP_CF_CONNECTING_IP" => "216.73.216.208" "HTTP_CDN_LOOP" => "cloudflare; loops=1" "HTTP_SEC_FETCH_MODE" => "navigate" "HTTP_SEC_FETCH_SITE" => "none" "HTTP_ACCEPT" => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" "HTTP_USER_AGENT" => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" "HTTP_UPGRADE_INSECURE_REQUESTS" => "1" "HTTP_SEC_CH_UA_PLATFORM" => ""Windows"" "HTTP_SEC_CH_UA_MOBILE" => "?0" "HTTP_SEC_CH_UA" => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" "HTTP_CACHE_CONTROL" => "no-cache" "HTTP_PRAGMA" => "no-cache" "HTTP_ACCEPT_ENCODING" => "gzip, br" "HTTP_CF_RAY" => "95050625ca70e82e-ORD" "HTTP_PRIORITY" => "u=0, i" "HTTP_SEC_FETCH_DEST" => "document" "HTTP_SEC_FETCH_USER" => "?1" "HTTP_CF_VISITOR" => "{"scheme":"https"}" "HTTP_CONNECTION" => "close" "HTTP_X_FORWARDED_PROTO" => "https" "HTTP_X_FORWARDED_FOR" => "216.73.216.208, 172.71.254.96" "HTTP_X_SERVER_ADDR" => "154.12.239.204" "HTTP_HOST" => "receivinghelpdesk.com" "HTTPS" => "on" "REDIRECT_STATUS" => "200" "REDIRECT_HTTPS" => "on" "FCGI_ROLE" => "RESPONDER" "PHP_SELF" => "/ask/index.php" "REQUEST_TIME_FLOAT" => 1750021510.0608 "REQUEST_TIME" => 1750021510 ]
        request_cookies
        0 of 0
        array:4 [ "_pk_id_64_7c30" => null "_pk_ses_64_7c30" => null "XSRF-TOKEN" => "uq26TEn1q7sIaOWGkCdJFuLTkMt0RQY2xStoDa5K" "askhelpdesk_session" => "4BNLlUjJYDlMtQTeJ7KfPYY23rac8hzgUzbiD8zr" ]
        response_headers
        0 of 0
        array:7 [ "content-type" => array:1 [ 0 => "text/html; charset=UTF-8" ] "cache-control" => array:1 [ 0 => "private, must-revalidate" ] "date" => array:1 [ 0 => "Sun, 15 Jun 2025 21:05:10 GMT" ] "pragma" => array:1 [ 0 => "no-cache" ] "expires" => array:1 [ 0 => -1 ] "set-cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6Ikt3bmM4ejJqK2E0cWpyTFRqQzYxbnc9PSIsInZhbHVlIjoidGh3VHdKeHBWY2NYY0FiVWdRSmZRaVdEL1BwNWQ3dW5vWXFveFBDNHdGMEM2VVVOVktaV3NLemlXNG1KcjY3MGdzSkdMTi8zYlgzRi9JelcxZFFlUXlYb1UvMW9mQW5KbWE4Ty9tSHViVzVBaTArU2x3WFFnWFhGN2pFTFhLa3AiLCJtYWMiOiI4MjRjN2MwN2JkZmUwZTFhZTFlNDI0ODM4ZWViYTE4M2EwNjJhM2FmMmNjNjAyZTFhNTA4MWEwZjlhYTZjMmZhIiwidGFnIjoiIn0%3D; expires=Sun, 15-Jun-2025 23:05:10 GMT; Max-Age=7200; path=/; samesite=laxXSRF-TOKEN=eyJpdiI6Ikt3bmM4ejJqK2E0cWpyTFRqQzYxbnc9PSIsInZhbHVlIjoidGh3VHdKeHBWY2NYY0FiVWdRSmZRaVdEL1BwNWQ3dW5vWXFveFBDNHdGMEM2VVVOVktaV3NLemlXNG1KcjY3MGdzSkdMT" 1 => "askhelpdesk_session=eyJpdiI6ImNNQjVKbEpmTGdULzJkUUxIczVQTEE9PSIsInZhbHVlIjoiMHgxRjhBODg1bGFiZGVJL2x4ZXFZVHBOa1EyVFVhNVFLWFBYT2hvVFViM1BYWUpYN3Q1QldHL2hRYnRMUU9LMHV6U1VrTlVmOVBmV1UreVl5ekNFWlkxZnVKMlBqS2hJOXNkYVRrVU5EeDVCdzZXTTM2dDNtdVRCUUhQZWZkakciLCJtYWMiOiIwZmI0NGZjM2Q4YzRkMGYxNDEyMjlkNmQ0OTVlMGE1MzJiNGNlMzUxNjcwZTVmMjQ5ZTBjYzAwYjk1ZmM5M2Q5IiwidGFnIjoiIn0%3D; expires=Sun, 15-Jun-2025 23:05:10 GMT; Max-Age=7200; path=/; httponly; samesite=laxaskhelpdesk_session=eyJpdiI6ImNNQjVKbEpmTGdULzJkUUxIczVQTEE9PSIsInZhbHVlIjoiMHgxRjhBODg1bGFiZGVJL2x4ZXFZVHBOa1EyVFVhNVFLWFBYT2hvVFViM1BYWUpYN3Q1QldHL2hRYnRMUU9L" ] "Set-Cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6Ikt3bmM4ejJqK2E0cWpyTFRqQzYxbnc9PSIsInZhbHVlIjoidGh3VHdKeHBWY2NYY0FiVWdRSmZRaVdEL1BwNWQ3dW5vWXFveFBDNHdGMEM2VVVOVktaV3NLemlXNG1KcjY3MGdzSkdMTi8zYlgzRi9JelcxZFFlUXlYb1UvMW9mQW5KbWE4Ty9tSHViVzVBaTArU2x3WFFnWFhGN2pFTFhLa3AiLCJtYWMiOiI4MjRjN2MwN2JkZmUwZTFhZTFlNDI0ODM4ZWViYTE4M2EwNjJhM2FmMmNjNjAyZTFhNTA4MWEwZjlhYTZjMmZhIiwidGFnIjoiIn0%3D; expires=Sun, 15-Jun-2025 23:05:10 GMT; path=/XSRF-TOKEN=eyJpdiI6Ikt3bmM4ejJqK2E0cWpyTFRqQzYxbnc9PSIsInZhbHVlIjoidGh3VHdKeHBWY2NYY0FiVWdRSmZRaVdEL1BwNWQ3dW5vWXFveFBDNHdGMEM2VVVOVktaV3NLemlXNG1KcjY3MGdzSkdMT" 1 => "askhelpdesk_session=eyJpdiI6ImNNQjVKbEpmTGdULzJkUUxIczVQTEE9PSIsInZhbHVlIjoiMHgxRjhBODg1bGFiZGVJL2x4ZXFZVHBOa1EyVFVhNVFLWFBYT2hvVFViM1BYWUpYN3Q1QldHL2hRYnRMUU9LMHV6U1VrTlVmOVBmV1UreVl5ekNFWlkxZnVKMlBqS2hJOXNkYVRrVU5EeDVCdzZXTTM2dDNtdVRCUUhQZWZkakciLCJtYWMiOiIwZmI0NGZjM2Q4YzRkMGYxNDEyMjlkNmQ0OTVlMGE1MzJiNGNlMzUxNjcwZTVmMjQ5ZTBjYzAwYjk1ZmM5M2Q5IiwidGFnIjoiIn0%3D; expires=Sun, 15-Jun-2025 23:05:10 GMT; path=/; httponlyaskhelpdesk_session=eyJpdiI6ImNNQjVKbEpmTGdULzJkUUxIczVQTEE9PSIsInZhbHVlIjoiMHgxRjhBODg1bGFiZGVJL2x4ZXFZVHBOa1EyVFVhNVFLWFBYT2hvVFViM1BYWUpYN3Q1QldHL2hRYnRMUU9L" ] ]
        session_attributes
        0 of 0
        array:4 [ "_token" => "uq26TEn1q7sIaOWGkCdJFuLTkMt0RQY2xStoDa5K" "_previous" => array:1 [ "url" => "https://receivinghelpdesk.com/ask/how-do-i-reset-the-alarm-on-my-kenmore-freezer" ] "_flash" => array:2 [ "old" => [] "new" => [] ] "PHPDEBUGBAR_STACK_DATA" => [] ]