How do I reset my Rainbird WiFi?
- Turn the control dial to the "off" position.
- Press the "next" button to access the clear-memory feature.
- Press and hold the "off" button until the display stops blinking.
- Turn the control dial to the "run" position.
- Press and hold down the "minus" arrow and "prog" buttons simultaneously.
How do I Reset my Rainbird password?
How do I reset my Rainbird password? Press the settings icon (3 gears) on the bottom right corner of the controller screen. Press the down arrow for “Controller Info”. Press in the Controller Password field and change the password to something that will be remembered.
How do I connect my Rainbird to WiFi?
Press the button on the LNK WiFi Module in the controller to activate AP Hotspot mode. The light should be blinking green and red. From your mobile device, go to WiFi settings and connect to the Rain Bird network “RAINBIRDXXXXXX”. Wait for your device to establish a WiFi connection with the LNK WiFi Module. Click to see full answer.
How do I Reset my Rain Bird sprinkler system?
Resetting a Rain Bird ESP-Me is easy. To reset the irrigation controller, all you need to do is turn the dial to 'Seasonal Adjust' then hold the left and right buttons down until the LCD display says 'CLEARED' then your ESP-Me irrigation controller has been reset. Likewise, how do I reset my Rain Bird SST sprinkler system?
What happens if I Lose my Rain Bird WiFi controller password?
Rain Bird WiFi Controller passwords are not kept anywhere except locally in the controller for the best level of security, so they are not recoverable when lost, they must be reset. You can reset the controller password while connected to the Rain Bird WiFi controller in AP hotspot mode.
How do you connect Rain Bird to WiFi?
How to setup the Rain Bird LNK WiFi Module and the mobile appDownload the Rain Bird App.Check the signal strength at the controller location. ... Insert LNK WiFi Module into the Accessory Port on compatible controller models.Verify LNK WiFi Module is alternating blinking red and green.More items...•
Why won't my Rain Bird controller connect?
If you are unable to connect to the controller, try pulling the WiFi module out of the controller and re-inserting it, allowing it to boot back up again. It should be blinking green when you try to connect in the Rain Bird app.
How do I reset my Rain Bird controller?
0:040:23How To Reset A Rain Bird ESP-Me Irrigation Controller - YouTubeYouTubeStart of suggested clipEnd of suggested clipHold the left and the right buttons down until it pops up with cleared. You've reset your controllerMoreHold the left and the right buttons down until it pops up with cleared. You've reset your controller.
How do I connect my Rain Bird st8 to WiFi?
1:385:30Rain Bird ST8-WiFi Timer: Installation and Set-up - YouTubeYouTubeStart of suggested clipEnd of suggested clipWi-Fi. Open the Wi-Fi connection menu. On your smartphone or tablet. These settings will varyMoreWi-Fi. Open the Wi-Fi connection menu. On your smartphone or tablet. These settings will vary depending on the device. You should see a Wi-Fi network with Rainbird in the name connect to this network.
How do I reset my Rain Bird WiFi password?
Open the Rain Bird App.Tap on the controller image that needs to be updated with the new WiFi name and password.Tap on the settings icon in the bottom right corner.Tap on “Network Settings”Tap on “Change WiFi Settings”More items...
How do you connect Rain Bird ESP tm2 to WiFi?
0:371:28Rain Bird ESP-TM2 WiFi Enabled Irrigation Controller - YouTubeYouTubeStart of suggested clipEnd of suggested clipDownload the Rainbird app for Android or iOS devices. And then use your device's Wi-Fi settings toMoreDownload the Rainbird app for Android or iOS devices. And then use your device's Wi-Fi settings to connect the app to the controller.
How do I reset my sprinkler controller?
0:071:27Reset a Hunter X-Core irrigation controller - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo okay I'm using a screwdriver you can use whatever you can and what I need to do is I need to holdMoreSo okay I'm using a screwdriver you can use whatever you can and what I need to do is I need to hold down this program button and then hold this side button the reset button for three seconds.
How do I reset my old Rainbird sprinkler system?
Turn the dial to Seasonal Adjust. Press and hold the left and right arrow buttons at the same time for at least 3 seconds. Until you see the word "CLEARED" on the screen. Your ESP-Me is now restored to the factory default settings.
How do I reprogram my sprinkler system?
3:237:47How to Program Your Lawn Sprinkler Controller - YouTubeYouTubeStart of suggested clipEnd of suggested clipStart times. So the start water and start watering times is for what time of day you want to come onMoreStart times. So the start water and start watering times is for what time of day you want to come on.
How do I change WiFi password on Rain Bird app?
You can reset the controller password while connected to the Rain Bird WiFi controller in AP hotspot mode. Press the button on the LNK WiFi Module in the controller for 1 second. The light should change from blinking green to blinking green and red.
How do you set up a Rain Bird controller?
0:342:06Rain Bird ESP-ME3 Basic Programming - YouTubeYouTubeStart of suggested clipEnd of suggested clipProgram press the left or right arrow buttons to select a station. Press the minus or plus buttonsMoreProgram press the left or right arrow buttons to select a station. Press the minus or plus buttons to set the run time for that selected station press.
How do you program the Rain Bird app?
0:004:22Programming the ST8-WiFi Timer Using the Rain Bird Mobile AppYouTubeStart of suggested clipEnd of suggested clipThe first thing you'll see is a card for your specific timer at the bottom of the card you'll seeMoreThe first thing you'll see is a card for your specific timer at the bottom of the card you'll see four icons tap. The water droplet icon to water is owned manually. Tap the email icon.
How to reset LNK controller?
Follow these steps to reset your controller password (you must be physically at the location of the controller): 1. Press the button on the LNK WiFi Module in the controller for 1 second. The light should change from blinking green to blinking green and red. 2.
What is hotspot mode?
Hotspot Mode is a simple remote access mode to your controller with the Rain Bird mobile app. To use this product in Hotspot Mode without programming the LNK WiFi Module to a local WiFi network, complete the following steps: +2-11
Why is the Rain Bird controller password not kept?
Rain Bird WiFi Controller passwords are not kept anywhere except locally in the controller for the best level of security, so they are not recoverable when lost, they must be reset.
How to change password on a controller?
Press on “Controller Info” down arrow and enter a new password. The controller password is restricted to letters and numbers, 4-8 digits in length. No special characters.
Does Rain Bird have a password?
During the setup of a Rain Bird WiFi controller users are asked to enter a controller password. This password is specific to the controller and protects access to the following areas of the controller: Connected Home Settings Notifications Network Info Network Settings Controller Info Settings Sharing Access with others invitations This password protection is important … Continue reading
What to do if your sprinkler is erratic?
If you are unsure about the programming settings or are experiencing erratic behavior that might have been caused by lightning or a power surge, you may want to clear all the programming and restore your ESP-Me sprinkler timer back to the factory default settings. The following steps will show you how.
How to reset ESP Me?
Step 1. Turn the dial to Seasonal Adjust. Step 2. Press and hold the left and right arrow buttons at the same time for at least 3 seconds. Until you see the word "CLEARED" on the screen. Step 3. Turn the dial back to AUTO RUN. Your ESP-Me is now restored to the factory default settings.
How to Adjust Your Spray Head
Adjusting your system's spray heads is as easy as following a few steps.
How Do I Connect My System to WiFi?
This guide walks you through how to use your Rain Bird Wi-Fi enabled controller with the Amazon Alexa voice assistant.
