How do I reset my Mini Cooper?
- Put the key into the ignition. Press in the trip odometer knob.
- Turn the ignition key to the first or "I" position while still depressing the trip odometer knob.
- Release the trip odometer knob and wait about three seconds.
- Depress the trip odometer knob again and wait about 10 seconds.
How to fix Mini Cooper?
How to fix a Mini Cooper fan blower not working? Click to expand… fixed my MINI Cooper S R56 fan blower not working in 5 min !!!! – remove the side panel on the driver foot side, 2 x to 20 screws. – put switch back on place, start motor, all working as before.
How do you reset alarm system on Mini Cooper's?
- Locate the reset button positioned in front cabin on the emergency brake handle.
- Turn the ignition to position 2, press and hold the reset button until the yellow indicator on the dash lights up for a few seconds.
- The vehicle is now ready to recalibrate the TPS system on your next drive. ...
How to reset Mini Cooper computer?
Step 2 – Resetting the BCU
- With the key in the "on" position (2), hold down the "trip reset" button for 3 seconds and "1. ...
- Press the "trip reset" button until you reach test #19, and it will alternate between "19 L-on" and "19 L-off" a few times.
- Once it displays "19 L-off" again, press the "trip reset" button. ...
How do you reset service reminder on Mini Cooper's?
- Press and hold the trip button, your mileage will display.
- Insert key and turn to position 1
- Watch for “RESET” to appear where the mileage was displayed.
- Continue to hold the button.
- Watch for “51A” to appear below.
- Continue to hold the button (5-8 seconds) for “RST” to replace the “51A”.
- Release the button, and 15000 will appear as new service interval.
How do I reset my Mini Cooper computer?
Press and hold the "trip reset" button for three seconds to navigate up through the menu until you reach "21. rESEt." Run this test to reset the computer, then it will return you to normal operating mode. Navigate back to "0. tEST" and press the trip reset button.
Where is the reset button on a Mini Cooper?
Locate the reset button positioned in front cabin on the emergency brake handle. Turn the ignition to position 2, press and hold the reset button until the yellow indicator on the dash lights up for a few seconds.
How do I reset my MINI car?
0:112:18How To Reset MINI Service Light (06-13) - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow I'm gonna use his thumb stock and hold it. Down. Let go press and hold again.MoreNow I'm gonna use his thumb stock and hold it. Down. Let go press and hold again.
How do you reset the computer on a 2008 Mini Cooper?
How to Reset the ECU:With the key in the ignition, but in the off position, press and hold down the odometer reset button with one hand.While holding the button down, switch the key in the ignition to position 1 (first click) with the other hand.More items...•
How do I reset my 2007 Mini Cooper?
0:111:07How to reset oil change reminder on 2007 Mini Cooper - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce you land on the service item that you want to reset. Press. And hold the BC button until theMoreOnce you land on the service item that you want to reset. Press. And hold the BC button until the reset option appears. Then press the BC button again to confirm the reset.
How do you reset a Mini Cooper 2005?
0:171:16Service Reset Mini Cooper R52 - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd I'm gonna press and hold the button I'm gonna have to switch hands here. So I got to turn theMoreAnd I'm gonna press and hold the button I'm gonna have to switch hands here. So I got to turn the key at the same time. Best and hold the button. Key in the first. Position.
How do I get my MINI Cooper out of limp mode?
How to get a car out of limp mode:Park your vehicle in a safe location.Move the shifter to the “PARK” position.Turn off the ignition or press STOP if the vehicle is equipped with Start/Stop button.Wait at least 60 seconds.Next, turn on the engine.Start driving.
What would cause a MINI Cooper to not start?
The most common three reasons being that your Mini Cooper is suffering from some type of alternator problem, your battery is dead, or the starter has gone bad. Of the three main reasons for your Mini Cooper not starting, a dead battery is the most common, followed by a bad alternator and then a bad starter.
Why does my MINI Cooper go into limp mode?
When one of the signals is abnormal, the car will revert to limp mode to prevent further damage. Problems which cause signals like this are usually faulty engine sensors/components/wiring, transmission issues, dysfunctional brakes and clutch, or even low fluid levels.
How do I reset my ECU?
0:191:33How to reset your ECU in less than 1 minute - YouTubeYouTubeStart of suggested clipEnd of suggested clipThen once you've opened the hood you need to find on the fuse box the fuse that says ECU. Which isMoreThen once you've opened the hood you need to find on the fuse box the fuse that says ECU. Which is this one. And now that you found it the only thing you need to do is remove.
How do I reset my 2013 Mini Cooper?
0:203:49How to Reset the Service Light on a 2013 Mini Cooper SD - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo now we're not going to put our foot down on the clutch because we don't want to actually startMoreSo now we're not going to put our foot down on the clutch because we don't want to actually start the engine we're just going to tap the stop start button. And you can see now is come up with service.
Step 1 – Remove the battery tray cover
Pop the hood of your Mini and locate the battery/rain tray cover in the far-left corner, near the top edge of the fender, hood and windshield. We need to access the battery to reset the car's computer, so removing these covers will be our first step.
Step 2 – Unhook the negative terminal from the battery
We are going to reset the ECU by disconnecting the battery long enough for it to go into "sleep" mode, commonly called a soft reset. To do so, we need to use our 13mm socket and disconnect the negative (black) terminal from the battery. You can remove the positive terminal as well if you're so inclined, but that's completely optional.
Step 3 – Reassembly
Okay, you're back, and sated with your beverage of choice? Excellent. This is the home stretch, and waiting was the hardest part.
How to reset TPMS on a MINI?
Here’s how to do it: Make sure to adjust the tire pressure recommended on the tire placard. Start the engine. From the main menu select MY MINI. Select VEHICLE STATUS.
Why does MINI use TPMS?
To help drivers know the condition of their car’s tire pressure, MINI applies the TPMS system to their vehicles. The appropriate tire pressure is needed to provide comfort while driving, reduce the level of friction, and significantly improve safety while driving. Table of Contents [ hide]
Do you reset the TPMS system after adjusting the tire pressure?
You must reset the TPMS system after adjusting the tire pressure. Depending on the vehicle model you have, here are a few ways to reset the TPMS on Mini Cooper:

Step 1 – Remove The Battery Tray Cover
Step 2 – Unhook The Negative Terminal from The Battery
- We are going to reset the ECU by disconnecting the battery long enough for it to go into "sleep" mode, commonly called a soft reset. To do so, we need to use our 13mm socket and disconnect the negative (black) terminal from the battery. You can remove the positive terminal as well if you're so inclined, but that's completely optional. If you have a rag or something similar, we reco…
Step 3 – Reassembly
- Okay, you're back, and sated with your beverage of choice? Excellent. This is the home stretch, and waiting was the hardest part. All that remains is to reconnect the negative terminal, and positive if you opted to remove it, and then reassemble the cowl covers by popping the cover back into the clips, refitting the weatherstripping and tightening down the two 13mm bolts. You're don…
Related Discussions