How to Reset a Homedics Body Fat Scale
- Hold the "On" button until the LCD screen turns on.
- Press the up or down arrow buttons to choose the memory slot you want to clear.
- Push and hold the up and down arrow button simultaneously to clear all of the information from the memory slot you chose.
- Repeat Steps 1-3 to delete any additional memory slots on the scale.
- Hold the "On" button until the LCD screen turns on. ...
- Press the up or down arrow buttons to choose the memory slot you want to clear. ...
- Push and hold the up and down arrow button simultaneously to clear all of the information from the memory slot you chose.
How do I Reset my HoMedics bathroom scale?
How do I reset my Homedics bathroom scale? Hold the "On" button until the LCD screen turns on. Press the up or down arrow buttons to choose the memory slot you want to clear. Push and hold the up and down arrow button simultaneously to clear all of the information from the memory slot you chose.
How do I Reset my HoMedics body fat scale?
How to Reset a Homedics Body Fat Scale. 1 Hold the "On" button until the LCD screen turns on. 2 Press the up or down arrow buttons to choose the memory slot you want to clear. 3 Push and hold the up and down arrow button simultaneously to clear all of the information from the memory slot you chose.
How do you fix a digital scale that won't weigh?
Make sure to always troubleshoot your device by checking on the batteries at the first sign of an issue. When weighing yourself on the digital scale, you have to make sure that you are centered on its surface and well-balanced. Also, what weighs exactly 500 grams?
How do I reset the memory slot on the scale?
Push and hold the up and down arrow button simultaneously to clear all of the information from the memory slot you chose. This resets the memory slot. Repeat Steps 1-3 to delete any additional memory slots on the scale.
How do you calibrate a Homedics bathroom scale?
4.To calibrate, apply weight on the scale, then step off and wait for the LED screen to display ""0.0"". Then, step back on the scale to weigh with accurate results.May 15, 2020
How do I reset my digital scale?
0:030:53Digital Scale Calibration - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you pick the scale up or store it away you'll need to set the scale on a hard flat surface. PressMoreIf you pick the scale up or store it away you'll need to set the scale on a hard flat surface. Press the scale awake. And wait for the scales display to read zero before weighing yourself otherwise.
How do I reset my body fat scale?
For reset, you may take one battery out, wait for 5 seconds, then put it back in, the scale will automatically reset itself. For re-calibrate the scale, you may step on the scale with one bare foot, then step off, see "CAL" on the screen, step on and weigh yourself.
How do you use a Homedics scale?
Place the scale on a flat, hard surface. Carpeted or uneven floors may affect. accuracy.Step on the scale positioning your feet evenly on the scale platform (Figure 1). Stand still while the scale measures your weight.When your weight stabilizes, the display will flash, and then show your weight. The.
How do I fix scale error?
You need to reset your scale using the instructions below;Remove the batteries.Leave the scale for about 10 minutes after removing the batteries.Re-insert the batteries and confirm the polarity is good.Place your digital scale on a flat surface, and confirm the feet are clear of any dirt or rust particles.More items...•Apr 25, 2021
How do I reset a scale?
Follow these instructions to reset your scale.Remove all batteries from the back of your scale.Leave the scale without its batteries for at least 10 minutes.Reinsert the batteries.Place your scale on a flat, even surface without carpet.Press the center of the scale with one foot to wake it up.May 21, 2020
How do you calibrate a scale?
Set the scale on a flat, level surface and turn it on. Wait a few moments for the scale to stabilize its readings. Locate the calibration switch (some scales require a sequence of numbers on the control panel) and activate the calibration mode. Place the quarter on the center of the scale and check the reading.
How do you change the battery in a HoMedics scale?
Use 1 x CR2032 lithium battery only.Open the battery cover on the back of the scale pushing the tab in the direction of. the “open” arrow. ... Insert a small screwdriver into the slot holding bracket and carefully. ... Place the new battery with the “+” sign up on an angle with one side under the tab. ... Close the battery cover.
How accurate are HoMedics scales?
The Stainless Steel/Glass Digital Bathroom Scale from HoMedics delivers precision functionality in a sleek, modern design worthy of the most style-conscious bath. It features a generously sized 13" x 13" platform, auto on/off, and 0.2 lb. accuracy.
How do I change my HoMedics scale from kg to lbs?
Press and hold the Zero control. After approximately five seconds, as you continue to press the Zero control, press and hold the Weigh control. When you hear a beep, release both controls. The display will be in configuration mode with the current unit setting highlighted: lb or kg.
Step 1
Hold the "On" button until the LCD screen turns on. This will take approximately 2 seconds. The information on the LCD screen is for the first memory setting.
Step 2
Press the up or down arrow buttons to choose the memory slot you want to clear. The number in the bottom right corner of the LCD screen indicates which memory slot is available. There are up to 10 slots available for storage, numbered 0-9.
Step 3
Push and hold the up and down arrow button simultaneously to clear all of the information from the memory slot you chose. This resets the memory slot.