Receiving Helpdesk

how do i reset my ge smart outlet

by Dr. Donnell Braun Published 3 years ago Updated 2 years ago

How do I reset my GE smart outlet?

  • Unplug the Lamp Module from the outlet.
  • Press and hold the button in the center of Lamp Module's front.
  • Plug the Lamp Module back into the outlet while holding down the button.
  • Release the button after the Lamp Module is plugged in.

To remove and reset the device Once the controller is ready to remove your device, press and release the button on the smart outlet to remove it from the network. To return to factory defaults Press the button 3 times, then press and hold the button for at least 3 seconds. The LED will blink 5 times to confirm.

Full Answer

What is the best smart outlet?

Best smart outlet strip: Monoprice Stitch ($29.99; target.com) Jacob Krol/CNN. The Monoprice Stitch is akin to the Wyze smart plug — just in a strip form. It offers easy setup, simple controls ...

How do I Reset my GE smart switch?

  • Unplug the Lamp Module from the outlet.
  • Press and hold the button in the center of Lamp Module's front.
  • Plug the Lamp Module back into the outlet while holding down the button.
  • Release the button after the Lamp Module is plugged in.

How do you reset a GE smart bulb?

  • Make sure everything has power and turn on.
  • Fully close your Google Home app (hard close). ...
  • Now you need to reboot all of your Google devices. ...
  • After that, wait for at least 3o seconds to connect all the devices.
  • Finally, you can test the operation by giving a voice command to your C by GE smart bulb.

How to reset GE light bulbs?

To reset the bridge:

  • Unplug your C-Reach from the wall outlet
  • While holding the side button, plug it back into the wall and keep holding the button for at least 10 seconds
  • All three LEDS will start flashing red to show the C-Reach has been reset

How do you reset a GE Z-Wave wall switch?

2:0519:05Z-Wave Pair, Reset, Exclude and Configure Dimmer and Relay ...YouTubeStart of suggested clipEnd of suggested clipI'm going to choose the options i'm going to choose edit. And i'm going to see at the very bottomMoreI'm going to choose the options i'm going to choose edit. And i'm going to see at the very bottom here it says delete. Device i'm going to try to delete. It.

How do I factory reset my GE smart switch?

1 Reset Smart Switch Press and hold your switch's button, toggle, or paddle for 10 seconds. If the reset is successful, the indicator light will begin blinking blue meaning the switch is ready to be set up again.

How do I pair my GE smart outlet?

3:064:1112721: GE Z-Wave In-Wall Smart Outlet - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis is your program button or your manual control button pressing it will add the device to the z-MoreThis is your program button or your manual control button pressing it will add the device to the z-wave Network or allow you to manually control your device this is a regular AC outlet.

How do I reset my smart plug?

Make sure the Smart Plug is plugged into a working power outlet, and press the button on the side of the Smart Plug. Hold the button until the LED light on the Smart Plug turns red. Wait for the LED to start blinking blue. When the LED blinks blue, the plug has been reset.Aug 25, 2021

How do I do a factory reset?

How to perform Factory Reset on Android smartphone?1 Tap Settings2 Tap General Management.3 Tap Reset.4 Tap Factory data reset.5 Tap RESET.6 Tap DELETE ALL. Please be patient as phone resetting takes some time.1 Tap Apps > Settings > Backup and reset.2 Tap Factory data reset > Reset Device > Erase Everything.More items...•Apr 25, 2021

How do I reset my Smart switch?

0:030:23Learn how to Reset Wi–Fi Smart In-Wall Light Switch - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd hold the reset button 10 seconds until you hear the click. Continue to press and hold the resetMoreAnd hold the reset button 10 seconds until you hear the click. Continue to press and hold the reset button another 5 seconds until you hear another click your device is now reset.

How do I get my GE to C in pairing mode?

Set up Cync (C by GE) devices in the Google Home appPlug in your device in the same room as your speaker or display.Set up your speaker or display if you haven't already.Open the Google Home app .At the top left, tap Add Set up device. New device .Follow the in-app instructions to complete setup.

How do I factory reset my GE plug C?

How to factory reset smart light strips from C by GE and CyncStart with the light switched off for at least five seconds.Turn the light on for eight seconds.Turn the light off for two seconds.Repeat this process five more times.The strip will flash three times if the reset has been successful.Jul 16, 2021

How do I connect my Alexa smart plug to GE?

Connecting Your Amazon AlexaIf you haven't already, set up your devices in the C by GE app.Open the Alexa app.Tap the menu icon in the top left corner.Select “Skills & Games”Tap the search icon and type in “C by GE”Select the C by GE skill and tap “Enable to use”Enter your C by GE account login information.More items...

Why can't I reset my smart plug?

If you have restarted your device and it still isn't working, reset your Amazon Smart Plug: Press and hold the button on the device for 12 seconds. Release the button once you see the red LED light. A blue LED blinks when reset is complete.

How do I fix unresponsive smart plug?

If your Amazon Smart Plug stopped working, restart your device.Unplug your Amazon Smart Plug from the outlet, and then plug it back in.Reset your Amazon Smart Plug: press and hold the button on the side of the device for 12 seconds.

Why is my smart plug not responding?

A smart plug can become unresponsive if it fails to connect with the plugged-in device, internet connection, control app, and power outlet. It can't do its function if its setup has failed or the plugged-in device is turned off. Outdated firmware can also cause the smart plug to be unresponsive.Nov 11, 2021

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9
8.3.21PHP Version2.4sRequest Duration2MBMemory UsageGET {post}Route
  • warninglog[14:58:12] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[14:58:12] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[14:58:12] LOG.warning: Callables of the form ["Swift_SmtpTransport", "Swift_Transport_EsmtpTranspor...
  • warninglog[14:58:12] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[14:58:12] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[14:58:12] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[14:58:12] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[14:58:12] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[14:58:12] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[14:58:12] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[14:58:12] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • Booting (15.91ms)
  • Application (2.38s)
  • 1 x Application (99.32%)
    2.38s
    1 x Booting (0.66%)
    15.91ms
    7 templates were rendered
    • themes.DevBlog.content.post (resources/views/themes/DevBlog/content/post.blade.php)34blade
      Params
      0
      post
      1
      postContent
      2
      author
      3
      updated_at
      4
      bing_rich_snippet_text
      5
      bing_rich_snippet_link
      6
      bing_related_keywords
      7
      google_related_keywords
      8
      bing_news_title
      9
      bing_news_description
      10
      bing_videos
      11
      bing_images
      12
      bing_search_result_title
      13
      bing_search_result_description
      14
      bing_search_result_url
      15
      bing_paa_questions
      16
      bing_paa_answers
      17
      bing_slider_faq_questions
      18
      bing_slider_faq_answers
      19
      bing_pop_faq_questions
      20
      bing_pop_faq_answers
      21
      bing_tab_faq_questions
      22
      bing_tab_faq_answers
      23
      google_faq_questions
      24
      google_faq_answers
      25
      google_rich_snippet
      26
      google_search_result
      27
      indexedArray
      28
      total_images
      29
      total_videos
      30
      settings
      31
      url_current
      32
      menus
      33
      sidebar
    • themes.DevBlog.layouts.master (resources/views/themes/DevBlog/layouts/master.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.head (resources/views/themes/DevBlog/panels/head.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.header (resources/views/themes/DevBlog/panels/header.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.navbar (resources/views/themes/DevBlog/panels/navbar.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.footer (resources/views/themes/DevBlog/panels/footer.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.scripts (resources/views/themes/DevBlog/panels/scripts.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    uri
    GET {post}
    middleware
    web, checkdate
    as
    post.show
    controller
    App\Http\Controllers\Frontend\json_data\PostController@show
    namespace
    where
    file
    app/Http/Controllers/Frontend/json_data/PostController.php:18-166
    7 statements were executed2.36s
    • select * from `posts` where `published_at` <= '2025-06-13 14:58:12' and `slug` = 'how-do-i-reset-my-ge-smart-outlet' and `posts`.`deleted_at` is null limit 1
      2.34ms/app/Providers/RouteServiceProvider.php:54receivinghelpdeskask
      Metadata
      Bindings
      • 0. 2025-06-13 14:58:12
      • 1. how-do-i-reset-my-ge-smart-outlet
      Backtrace
      • 15. /app/Providers/RouteServiceProvider.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/Router.php:842
      • 19. Route binding:39
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/framework/src/Illuminate/Foundation/Http/Middleware/VerifyCsrfToken.php:78
    • select * from `json_post_contents` where `json_post_contents`.`post_id` = 148922 and `json_post_contents`.`post_id` is not null and `rewrite_id` = 0
      7.26msmiddleware::checkdate:30receivinghelpdeskask
      Metadata
      Bindings
      • 0. 148922
      • 1. 0
      Backtrace
      • 19. middleware::checkdate:30
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/jetstream/src/Http/Middleware/ShareInertiaData.php:61
      • 22. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/Middleware/SubstituteBindings.php:50
    • select * from `nova_menu_menus` where `slug` = 'header' limit 1
      560μs/vendor/outl1ne/nova-menu-builder/src/helpers.php:32receivinghelpdeskask
      Metadata
      Bindings
      • 0. header
      Backtrace
      • 15. /vendor/outl1ne/nova-menu-builder/src/helpers.php:32
      • 17. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 19. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
      • 20. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:205
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`menu_id` = 1 and `nova_menu_menu_items`.`menu_id` is not null and `parent_id` is null order by `parent_id` asc, `order` asc, `name` asc
      390μs/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Bindings
      • 0. 1
      Backtrace
      • 19. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 20. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 22. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 24. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`parent_id` in (1) order by `order` asc
      620μs/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Backtrace
      • 24. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 25. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 27. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 28. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 29. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select `id`, `post_title`, `slug` from `posts` where `status` = 'publish' and `posts`.`deleted_at` is null order by RAND() limit 10
      2.35s/app/View/Composers/SidebarView.php:22receivinghelpdeskask
      Metadata
      Bindings
      • 0. publish
      Backtrace
      • 14. /app/View/Composers/SidebarView.php:22
      • 15. /app/View/Composers/SidebarView.php:12
      • 16. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:124
      • 17. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:162
      • 20. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:177
    • select * from `fake_users` where `fake_users`.`id` = 29629 limit 1
      820μsview::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15receivinghelpdeskask
      Metadata
      Bindings
      • 0. 29629
      Backtrace
      • 21. view::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15
      • 23. /vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:108
      • 24. /vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
      • 25. /vendor/livewire/livewire/src/ComponentConcerns/RendersLivewireComponents.php:69
      • 26. /vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:61
    App\Models\FakeUser
    1
    Outl1ne\MenuBuilder\Models\MenuItem
    1
    Outl1ne\MenuBuilder\Models\Menu
    1
    App\Models\JsonPostContent
    1
    App\Models\Post
    11
        _token
        yfmgkHktYXbgOYNuyZXcSvUzrMTBVtb80R4MuFW6
        _previous
        array:1 [ "url" => "https://receivinghelpdesk.com/ask/how-do-i-reset-my-ge-smart-outlet" ]
        _flash
        array:2 [ "old" => [] "new" => [] ]
        PHPDEBUGBAR_STACK_DATA
        []
        path_info
        /how-do-i-reset-my-ge-smart-outlet
        status_code
        200
        
        status_text
        OK
        format
        html
        content_type
        text/html; charset=UTF-8
        request_query
        []
        
        request_request
        []
        
        request_headers
        0 of 0
        array:24 [ "cf-ipcountry" => array:1 [ 0 => "US" ] "cf-connecting-ip" => array:1 [ 0 => "216.73.216.230" ] "cdn-loop" => array:1 [ 0 => "cloudflare; loops=1" ] "sec-fetch-site" => array:1 [ 0 => "none" ] "accept" => array:1 [ 0 => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" ] "user-agent" => array:1 [ 0 => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" ] "upgrade-insecure-requests" => array:1 [ 0 => "1" ] "sec-ch-ua-platform" => array:1 [ 0 => ""Windows"" ] "sec-ch-ua-mobile" => array:1 [ 0 => "?0" ] "sec-ch-ua" => array:1 [ 0 => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" ] "cache-control" => array:1 [ 0 => "no-cache" ] "pragma" => array:1 [ 0 => "no-cache" ] "sec-fetch-dest" => array:1 [ 0 => "document" ] "cf-ray" => array:1 [ 0 => "94f08e780fe3f861-ORD" ] "accept-encoding" => array:1 [ 0 => "gzip, br" ] "priority" => array:1 [ 0 => "u=0, i" ] "sec-fetch-user" => array:1 [ 0 => "?1" ] "sec-fetch-mode" => array:1 [ 0 => "navigate" ] "cf-visitor" => array:1 [ 0 => "{"scheme":"https"}" ] "connection" => array:1 [ 0 => "close" ] "x-forwarded-proto" => array:1 [ 0 => "https" ] "x-forwarded-for" => array:1 [ 0 => "216.73.216.230, 172.70.131.119" ] "x-server-addr" => array:1 [ 0 => "154.12.239.204" ] "host" => array:1 [ 0 => "receivinghelpdesk.com" ] ]
        request_server
        0 of 0
        array:55 [ "USER" => "runcloud" "HOME" => "/home/runcloud" "SCRIPT_NAME" => "/ask/index.php" "REQUEST_URI" => "/ask/how-do-i-reset-my-ge-smart-outlet" "QUERY_STRING" => "" "REQUEST_METHOD" => "GET" "SERVER_PROTOCOL" => "HTTP/1.0" "GATEWAY_INTERFACE" => "CGI/1.1" "REDIRECT_URL" => "/ask/how-do-i-reset-my-ge-smart-outlet" "REMOTE_PORT" => "45988" "SCRIPT_FILENAME" => "/home/runcloud/webapps/ReceivingHelpDesk/ask/index.php" "SERVER_ADMIN" => "you@example.com" "CONTEXT_DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "CONTEXT_PREFIX" => "" "REQUEST_SCHEME" => "http" "DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "REMOTE_ADDR" => "172.70.131.119" "SERVER_PORT" => "80" "SERVER_ADDR" => "127.0.0.1" "SERVER_NAME" => "receivinghelpdesk.com" "SERVER_SOFTWARE" => "Apache/2.4.63 (Unix) OpenSSL/1.1.1f" "SERVER_SIGNATURE" => "" "LD_LIBRARY_PATH" => "/RunCloud/Packages/apache2-rc/lib" "PATH" => "/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" "HTTP_CF_IPCOUNTRY" => "US" "HTTP_CF_CONNECTING_IP" => "216.73.216.230" "HTTP_CDN_LOOP" => "cloudflare; loops=1" "HTTP_SEC_FETCH_SITE" => "none" "HTTP_ACCEPT" => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" "HTTP_USER_AGENT" => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" "HTTP_UPGRADE_INSECURE_REQUESTS" => "1" "HTTP_SEC_CH_UA_PLATFORM" => ""Windows"" "HTTP_SEC_CH_UA_MOBILE" => "?0" "HTTP_SEC_CH_UA" => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" "HTTP_CACHE_CONTROL" => "no-cache" "HTTP_PRAGMA" => "no-cache" "HTTP_SEC_FETCH_DEST" => "document" "HTTP_CF_RAY" => "94f08e780fe3f861-ORD" "HTTP_ACCEPT_ENCODING" => "gzip, br" "HTTP_PRIORITY" => "u=0, i" "HTTP_SEC_FETCH_USER" => "?1" "HTTP_SEC_FETCH_MODE" => "navigate" "HTTP_CF_VISITOR" => "{"scheme":"https"}" "HTTP_CONNECTION" => "close" "HTTP_X_FORWARDED_PROTO" => "https" "HTTP_X_FORWARDED_FOR" => "216.73.216.230, 172.70.131.119" "HTTP_X_SERVER_ADDR" => "154.12.239.204" "HTTP_HOST" => "receivinghelpdesk.com" "HTTPS" => "on" "REDIRECT_STATUS" => "200" "REDIRECT_HTTPS" => "on" "FCGI_ROLE" => "RESPONDER" "PHP_SELF" => "/ask/index.php" "REQUEST_TIME_FLOAT" => 1749806892.9054 "REQUEST_TIME" => 1749806892 ]
        request_cookies
        []
        
        response_headers
        0 of 0
        array:7 [ "content-type" => array:1 [ 0 => "text/html; charset=UTF-8" ] "cache-control" => array:1 [ 0 => "private, must-revalidate" ] "date" => array:1 [ 0 => "Fri, 13 Jun 2025 09:28:12 GMT" ] "pragma" => array:1 [ 0 => "no-cache" ] "expires" => array:1 [ 0 => -1 ] "set-cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6IjN4VGNsdEE3V0lGU0JXUDB5K3pIZlE9PSIsInZhbHVlIjoiSU9JcnNjT2NmSmQzZUtqNldQYjZQd2NhTlNlNTk5TDN0Ry9Ea3NqZDJwT1RxaVpJSU9zQlRPSDVkTmxMb2FRbE9UajNpa0xPZzdRS3RPWjZQQ1hocWNkQ09Cd1NQUFVPaTlLa2NGZG9nRklHcE1OTEJ5TVIwUmpJU2lTakMybFkiLCJtYWMiOiIwNmQ4YTRkYWQzYzgyNWMyNjkzMjI4MTM2MGJmNDkyMjAyNDQyZTc5YTEyZDExNzk0ZTY3ZTllYTI0MDdmZDE5IiwidGFnIjoiIn0%3D; expires=Fri, 13-Jun-2025 11:28:15 GMT; Max-Age=7200; path=/; samesite=laxXSRF-TOKEN=eyJpdiI6IjN4VGNsdEE3V0lGU0JXUDB5K3pIZlE9PSIsInZhbHVlIjoiSU9JcnNjT2NmSmQzZUtqNldQYjZQd2NhTlNlNTk5TDN0Ry9Ea3NqZDJwT1RxaVpJSU9zQlRPSDVkTmxMb2FRbE9UajNpa" 1 => "askhelpdesk_session=eyJpdiI6IkpjSXNqS05KWFcrZnNLQmd6NUZodXc9PSIsInZhbHVlIjoicTZZSlFMZ1ZEOTRYdllEL01PZk9sN3kxY0w0U2NPYjFPL3FxYWxnRGNUOFRqSm5yTWFMcG5WU3dNVW1tbFdCVmJMbGdOdk1BTFB3b3p3YlJGVndtQndYRnUwMEV0R0psTHB4OFNmb0xhdzRnQUg5RitEU2hXdnJsNU81Z0VuUlAiLCJtYWMiOiI3NWQ0MjM5N2VjMWM1ZjFjMGFlM2MxNmVlYmMwNDQ0YzFlNjFkMmMyMjBhMjgyNDdlYmRjOWUxNWNlMTI5NmQ1IiwidGFnIjoiIn0%3D; expires=Fri, 13-Jun-2025 11:28:15 GMT; Max-Age=7200; path=/; httponly; samesite=laxaskhelpdesk_session=eyJpdiI6IkpjSXNqS05KWFcrZnNLQmd6NUZodXc9PSIsInZhbHVlIjoicTZZSlFMZ1ZEOTRYdllEL01PZk9sN3kxY0w0U2NPYjFPL3FxYWxnRGNUOFRqSm5yTWFMcG5WU3dNVW1tbFdC" ] "Set-Cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6IjN4VGNsdEE3V0lGU0JXUDB5K3pIZlE9PSIsInZhbHVlIjoiSU9JcnNjT2NmSmQzZUtqNldQYjZQd2NhTlNlNTk5TDN0Ry9Ea3NqZDJwT1RxaVpJSU9zQlRPSDVkTmxMb2FRbE9UajNpa0xPZzdRS3RPWjZQQ1hocWNkQ09Cd1NQUFVPaTlLa2NGZG9nRklHcE1OTEJ5TVIwUmpJU2lTakMybFkiLCJtYWMiOiIwNmQ4YTRkYWQzYzgyNWMyNjkzMjI4MTM2MGJmNDkyMjAyNDQyZTc5YTEyZDExNzk0ZTY3ZTllYTI0MDdmZDE5IiwidGFnIjoiIn0%3D; expires=Fri, 13-Jun-2025 11:28:15 GMT; path=/XSRF-TOKEN=eyJpdiI6IjN4VGNsdEE3V0lGU0JXUDB5K3pIZlE9PSIsInZhbHVlIjoiSU9JcnNjT2NmSmQzZUtqNldQYjZQd2NhTlNlNTk5TDN0Ry9Ea3NqZDJwT1RxaVpJSU9zQlRPSDVkTmxMb2FRbE9UajNpa" 1 => "askhelpdesk_session=eyJpdiI6IkpjSXNqS05KWFcrZnNLQmd6NUZodXc9PSIsInZhbHVlIjoicTZZSlFMZ1ZEOTRYdllEL01PZk9sN3kxY0w0U2NPYjFPL3FxYWxnRGNUOFRqSm5yTWFMcG5WU3dNVW1tbFdCVmJMbGdOdk1BTFB3b3p3YlJGVndtQndYRnUwMEV0R0psTHB4OFNmb0xhdzRnQUg5RitEU2hXdnJsNU81Z0VuUlAiLCJtYWMiOiI3NWQ0MjM5N2VjMWM1ZjFjMGFlM2MxNmVlYmMwNDQ0YzFlNjFkMmMyMjBhMjgyNDdlYmRjOWUxNWNlMTI5NmQ1IiwidGFnIjoiIn0%3D; expires=Fri, 13-Jun-2025 11:28:15 GMT; path=/; httponlyaskhelpdesk_session=eyJpdiI6IkpjSXNqS05KWFcrZnNLQmd6NUZodXc9PSIsInZhbHVlIjoicTZZSlFMZ1ZEOTRYdllEL01PZk9sN3kxY0w0U2NPYjFPL3FxYWxnRGNUOFRqSm5yTWFMcG5WU3dNVW1tbFdC" ] ]
        session_attributes
        0 of 0
        array:4 [ "_token" => "yfmgkHktYXbgOYNuyZXcSvUzrMTBVtb80R4MuFW6" "_previous" => array:1 [ "url" => "https://receivinghelpdesk.com/ask/how-do-i-reset-my-ge-smart-outlet" ] "_flash" => array:2 [ "old" => [] "new" => [] ] "PHPDEBUGBAR_STACK_DATA" => [] ]