How do I reset my Elkay ezH2O?
- Remove the top cover of the bottle filling station by unscrewing the two Torx screws.
- Depress the program button for approximately two seconds until the display changes and then release.
Full Answer
How do I Reset my Elkay EZH2O filter status?
How do I reset my Elkay ezH2O bottle filler filter status? *The directions below are for units with an LED bottle filler counter. Remove the top cover of your ezH2O unit. Press the black reset button located in the top right side, holding for about two seconds before releasing.
How do I Clean my Elkay EZH2O cooler?
Elkay recommends using a soft cloth (we think microfiber would work well) along with mild dishwashing soap to spray and wipe down the unit. We recommend paying extra attention to the bubbler, push buttons, and other areas of the cooler that are often touched by users. How do I change the filter on my Elkay ezH2O cooler?
Why choose Elkay EZH2O?
The seamless design of Elkay ezH2O makes them easy to install, keep clean, and properly maintained, with a little bit of attention and care.
How do I Reset my EZH2O water fountain?
Follow these steps to reset your water fountain if it has an LED bottle filler counter. Remove the top cover of your ezH2O water fountain. Then press the black reset button located on the top right side and hold it for at least two seconds before releasing. Different messages will flash across the LED interface.
How do you reset an Elkay ezH2O?
1:132:18How to Replace a Filter and Reset Filter Status on Elkay ezH2O Bottle ...YouTubeStart of suggested clipEnd of suggested clipNow the display will change to show filter equals depress. The button again and the display willMoreNow the display will change to show filter equals depress. The button again and the display will show filter equals zero. When the green LED is illuminated the filter monitor has been reset replace.
What does the yellow light mean on a Elkay water fountain?
What does the yellow light mean on the bottle filling station? Is the water still safe to drink? The LED lights on the bottle filling station indicate the status of the filter. Green indicates the filter needs no attention. Yellow is to alert the maintenance or repair group that a new filter will be needed shortly.
How do I fix my Elkay water fountain?
Restore power to outlet.Find correct wire & replace on to solenoid.Replace power cord.Open shut off valve.Replace regulator.Locate affected line & remove kink.Refer to freeze up section of "water won't flow intermittently"
What does ot mean when the Elkay filter status is yellow?
When the filter light on your Elkay ezH2O bottle filler is illuminating the yellow light, then your bottle filler is supplying filtered water from the unit. The yellow light indicates that the filter has between 20-1% of its filter life left.
What does a yellow water filter status mean?
Yellow [indicates] the water is still being filtered but will need to be replaced shortly. Red [indicates] the filter has reached 100% of its usable life and should be replaced promptly.”
How do I turn off my Elkay ezh2o water supply?
Shut off the water supply using the shut-off valve. Turn water shut-off valve handle to the OFF position (clockwise). The handle will be facing up when closed. Activate the water dispenser using a water bottle to relieve pressure in the water line.
Why is my water fountain not working?
Check the fountain pump's impeller by placing a hand on top of the running pump. If you feel a mechanical piece whirring inside, the impeller is working. If this piece isn't working, it's likely jammed with debris. Run water backward through the pump to remove any blockages in the impeller.
How do you troubleshoot a drinking fountain?
Clogs are the number one reason drinking fountains don't work. Look at the bubbler (where the water comes out of) and see if there are any obstructions. Sometimes dirt or other gunk gets stuck making drinking from the fountain impossible. Use a sharp stick to see if the system has been clogged.
How do I fix my water fountain?
0:0016:06How to fix and replace a water fountain pump (a Tetra pump)YouTubeStart of suggested clipEnd of suggested clipRight here it's a little black plug. That goes in the hole on top here that goes in here I made aMoreRight here it's a little black plug. That goes in the hole on top here that goes in here I made a little extra length of hose and got a second adapter but yours will be basically the same here.
How long do Elkay water filters last?
1 yearFilter should be replaced every 3,000 gallons or 1 year after installation. Equipped with quick-disconnect, 1/4 turn installation, as well as automatic inlet shut-off valve that closes when filter is removed. Designed to reduce lead, particles and chlorine. Also reduces odors and discoloration from incoming water.
How do I change the filter on my Elkay ezh2o?
0:182:50How to Replace an Elkay ezH2O Water Filter - YouTubeYouTubeStart of suggested clipEnd of suggested clipTurn off the water supply. Then dispense water to relieve pressure through either the bubbler or theMoreTurn off the water supply. Then dispense water to relieve pressure through either the bubbler or the bottle filler. Turn the use filter clockwise a quarter turn to remove the filter head and dispose.
How long do water fountain filters last?
As a general rule, many water filters last anywhere from 6-12 months before they need to be replaced.
How to clean Elkay cooler?
Elkay recommends using a soft cloth (we think microfiber would work well) along with mild dishwashing soap to spray and wipe down the unit . We recommend paying extra attention to the bubbler, push buttons, and other areas of the cooler that are often touched by users.
What time does Elkay water cooler work?
Phone hours are Monday through Friday, 7:30 AM - 5:00 PM EST. Hopefully, this article helps you identify the cause of issue for your water cooler, along with how to fix it and get your Elkay unit back in proper working order.
What causes back pressure in bubbler stream?
Bubbler stream waterway is partially restricted causing back pressure or less space to flow through the bubbler causing back pressure. Clean or replace bubbler.
How to clean a strainer valve?
To clean the strainer, unscrew the solenoid valve cap. Remove the screen and rinse thoroughly with water. Insert screen back onto solenoid valve and make sure o-ring is placed properly.
What happens if you add a water filter to a stream?
If a new water filter is added and the stream becomes low, that filter may cause the water flow to lessen. If this occurs, then you will need to replace the filter.
Why does water run even after power cord is unplugged?
Water continues to run even after the power cord is unplugged. This means that the solenoid or solenoid diaphragm is defective. Replace the solenoid. You will know the solenoid is the issue is you unplug the power cord and the water flow does not immediately stop.
Why is my water stream low?
The solenoid may also be the cause of low water stream. This occurs when the solenoid will not open up all the way. The models this is applicable to are EZ, HTV, and electronic eye models. If this is the case, the solenoid needs to be replaced.
What does the green light on an Elkay EzH20 mean?
The green light indicates that the filter has between 100-21% of its filter life left. No action is needed when an Elkay bottle filler filter light is green.
How to change a filter in a bottle?
Remove the red cap from the new filter, and insert the filter into the bottle filler. Turn the filter clockwise until you cannot turn it any further.
How to check if filter is properly installed?
Checking that the filter is properly installed - Is the label facing forward, white tag facing back, filter in the right orientation, etc.
Does Elkay EzH2O reset filter?
Older Models: Older Elkay ezH2O bottle fillers will not automatically reset with a new filter installation. Here are step-by-step directions for resetting the filter state on older Elkay bottle filling stations, directly from Elkay.
Can you add videos to your watch history?
Videos you watch may be added to the TV's watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.
How do I make my Elkay water fountain colder?
To adjust the cold feature, unscrew the top part of the water fountain and adjust the toggle switch to the colder setting. The LED display will display the cold setting enabling you to adjust as needed. Refer to your manual for more directions.
How to relieve pressure on water fountain?
Unplug the the water fountain or Turn off the water supply; then dispense water to relieve pressure (through either the bubbler or the bottle filler).
Why is my water fountain flashing red?
Flashing Red: (only applies to P-SKU’s) Filter is installed backward or an issue with the NFC board in the water fountain or tag on the filter. Remove the filter and reinstall 1800 from the original position. See also the troubleshooting guide.
Why isn't my fountain draining?
If the fountain does not drain after this , the push button may be defective and needs to be replaced. Alternatively, the drain hole opening mechanism may be damaged and need to be replaced or fixed.
How to remove top cover of bottle filling station?
Remove the top cover of the bottle filling station by unscrewing the two Torx screws.
Why is my fountain not getting cold?
If the water in the fountain is not getting cold, there is an issue with the compressor. Here are some common compressor issues and how to fix them;
What to do if water fountain is not cold?
If the water fountain’s water is not very cold, check to see if the compressor is low on refrigerant and refill the refrigerant or contact a service agent to do it. Additionally, clean the condenser fins in front of the fan, causing the compressor to malfunction.
Models
Elkay offers two built-in filtered water dispensers to meet your needs and preferences, one offering chilled water, and one offering ambient water. Designed to seamlessly fit any space, it’s a sleek, convenient addition to any room, from your entertaining space to the master suite, and even the kitchen.
Filtration
Our WaterSentry® Plus residential filter is a carbon block filter with a polypropylene prefilter that is rated to NSF 42 and 53 for lead, class 1 particulate, chlorine, taste and odor reduction. It is rated for 750 gallons.
Installation
Elkay’s ezH2O® Liv™ is designed for residential, indoor use only and should not be installed outdoors or in humid environments. This water dispenser should not be installed on exterior walls.
Lead
For centuries, lead has been widely used in plumbing systems that transport water. Despite changes in plumbing codes making it illegal to use lead pipes or solder, lead is still found in older pipes, solder and brass fittings in existing plumbing systems.
Operation
Please see the ezH2O Liv Built-in Filtered Water Dispenser (Clean & Care) article.
What happens if the program button is not pushed again?
If the program button is not pushed again the display will scroll through the two messages above for three cycles and then default back to bottle count and be back in run mode.
How many pages are in the installation manual for EZWSRK?
Here is the full 19-page Installation and Use Manual for EZWSRK and LZWSRK ezH2O Bottle Filling Stations. These control board instructions as well as additional instructions concerning the control board can be found on page 17 including:
How long does it take to see the bottle counter on a Refrig?
REFRIG units: Place bottle or hand in front of sensor for approximately 9 seconds to see bottle counter count 00000001, (This is based on filling a 20 oz. bottle).
Who is the distributor of Elkay fountains?
Equiparts has been a master distributor of Elkay units and repair parts for over 25 years. Work with us to get expert support for your Elkay drinking fountain and bottle filler needs.
Who sells Elkay filters?
Equiparts is a master distributor of Elkay. We sell all of the units, repair parts, and filters Elkay makes, with many of them in stock and ready to ship. Listed below are related parts and filters for EZWSR and LZWSR units:
Can you find repair parts for Elkay?
If you cannot find the repair parts or units you need, give us a call to place your order. Elkay makes many variations of their bottle fillers and we do not have every configuration listed online. Know that when you call in for help with Elkay units or parts, we will connect you with an Elkay repair parts specialist. We have worked with Elkay for many years, and know their units very well.
What is Elkay Get Lead Out?
Elkay provides products, programs and resources to help you bring cleaner, healthier water to your facility. The Elkay Get Lead Out campaign kit includes product information, video and photo assets, educational opportunities and more.
What is an Elkay filtered water bottle filling station?
Elkay filtered ezH2O bottle filling stations reduce lead and other harmful contaminants, putting cleaner, healthier water within everyone's reach. We continue to expand our ezH2O bottle filling station offerings. This innovative and award-winning product line upholds our commitment to delivering clean water and sustainable design. It provides a rapid fill of drinking water to quench thirst and minimize plastic bottle waste in the environment.
What is Elkay water?
Elkay is your one-stop shop for all things water delivery. From selecting the perfect unit that meets the needs of your facility, to making sure the unit is installed right and running smooth. From plumbing to electrical, and HVAC to construction, we’ve got it covered!
What does the red light on a filter mean?
Green, yellow and red LED lights indicate filter status and when a filter needs to be replaced.
How many gallon is a Watersentry Plus filter?
Uses our industry-leading WaterSentry Plus filter rated for 3,000-gallon capacity and NSF certified to NSF/ANSI 42 and 53 for reduction of lead, Class 1 particulate, chlorine, taste and odor.
What is a vandal resistant bubbler?
Vandal Resistant: One-piece bubblers have a chrome-plated hood guard that prevents contamination
What is heavy gauge construction?
Heavy-gauge Construction: Made with tamper-resistant screws that withstand stains and corrosion.
