Receiving Helpdesk

how do i reset my bose cinemate

by Omer Reynolds Published 3 years ago Updated 3 years ago

How do I reset my Bose CineMate?

  • Turn the system off.
  • Unplug the Acoustimass® module power cord from the power outlet.
  • Wait 60 seconds.
  • Plug the Acoustimass module power cord into a working power outlet.
  • Turn the system on.

Reset your product by following these steps:
  1. Turn the product off.
  2. Unplug the power cord from the power outlet.
  3. Disconnect the Interface Module from the Acoustimass Module. Wait 30 seconds.
  4. Reconnect the Interface Module.
  5. Reconnect the power cord.
  6. Retest the system.

Full Answer

How do I Reset my Bose CineMate 15?

 · How do I reset my Bose CineMate? Turn the system off. Unplug the Acoustimass® module power cord from the power outlet. Wait 60 seconds. Plug the Acoustimass module power cord into a working power outlet. Turn the system on.

What do I do if I Lost my Bose CineMate remote?

 · How do I reset my Bose remote? Locate the TV section in the universal remote device codes book included with your system. Locate the device code (s) for your brand of TV and select a code from the list. On the remote, press and hold Setup until all five source buttons light. Press TV. On the number ...

How do I Turn On my CineMate Acoustimass?

 · First, make sure that you plug your Bose Cinemate into a working outlet. If your Bose Cinemate is plugged into a surge protector, you might need to replace that. Also, restart …

How do I perform a factory reset on my Samsung soundbar?

 · How To Program a BOSE REMOTE Cinemate*Disclaimer: I am not a licensed electrician or professional repair person. 4K Tech is not responsible for any damage, m...

How do I reset my Bose Cinemate 1Sr?

Turn the product off. Unplug the speaker array power cord from the power outlet. Unplug the Acoustimass Module power cord from the power outlet. Wait 30 seconds.

Why does my Bose Cinemate wont turn on?

Be sure the power cord is connected to a working power outlet. If the outlet is controlled by a wall switch, be sure the switch is on. You can also verify if the outlet works by connecting another electronic device, such as a lamp.

How do I reset my Bose Cinemate Sr remote?

Reset the universal remote.On the remote control, press and hold a source button (i.e., TV or CBL-SAT) until all six source buttons glow, then release. The button that was held remains glowing.On the number keypad, enter 981. The source buttons flash to confirm.Reprogram the remote.

How do I reset my Bose system?

In order to reset your speaker, press and hold the buttons 1 and volume for 10 seconds. After 1 second, all of the lights on the front of your speaker will turn orange. Hold down the buttons for 10 seconds until all of the lights flash white.

How do I turn on my Bose CineMate?

Make sure the correct button is pressed. Be careful to press the On/Off button to turn the system on. If a source button is pressed, or if multiple buttons are pressed at the same time, the system will will not turn on.

How do I fix my Bose CineMate Series 2?

How to Troubleshoot a Bose CineMate Series 2Unplug the Acoustimass unit. ... Unplug the Acoustimass unit. ... Use the remote control to turn on the system. ... Make sure the interface module is properly connected to the Acoustimass module.Make sure the system is turned on. ... Make sure the TV is not muted.More items...

How do I reset my Bose remote to factory settings?

Reset the universal remote.On the remote control, press and hold a source button (i.e., TV or CBL-SAT) until all six source buttons glow, then release. The button that was held remains glowing.On the number keypad, enter 981. The source buttons flash to confirm.Reprogram the remote.

How do I pair my Bose Cinemate remote?

1:163:00Bose CineMate Universal Remote - Programing and Using - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow press and hold the cable Sat source button on the universal remote until six source buttons glowMoreNow press and hold the cable Sat source button on the universal remote until six source buttons glow. Then release only the cable Sat button should stay lit and enter.

Why is my Bose remote not working?

Try new batteries in the remote. In case the battery or batteries in your remote are low or have no power, replace them. Alkaline batteries are recommended over rechargeable batteries, which might output lower voltage.

How do I reset my Bose surround sound system?

Reset your product by following these steps:Turn the product off.Unplug the power cord from the power outlet.Disconnect the Interface Module from the Acoustimass Module. Wait 30 seconds.Reconnect the Interface Module.Reconnect the power cord.Retest the system.

Why is my Bose speaker not connecting?

For Android devices, try clearing stored Bose app data from the device. If using an Android device, you can clear the app data that the device stores for the Bose app. This will erase all Bose app settings so you can start fresh. To do this, go to the device Settings menu and look for the Apps menu.

Why is my Bose speaker not playing music?

Reboot the Bluetooth® device. Electronics might need to be reset on occassion to correct minor issues. This is typically done by shutting down the device, then powering it on again.

What happens if my Bose Cinemate 10 doesn't connect?

If your device fails to connect with the Cinemate 10, it is possible that Bluetooth on your device is turned off. This can happen if you have Bluetooth turned off or your device is in low power or airplane mode. To turn Bluetooth on, go to the settings menu of the device you are attempting to pair with the Bose Cinemate 10, find Bluetooth settings, and ensure that your Bluetooth is turned on.

How long is the Bose Cinemate 10?

The Bose Cinemate 10 is a 12 inch long soundbar, that comes with a four button remote control. It needs to be plugged into a TV, and includes digital optical, coaxial, and analog audio inputs.

How to reset a speaker that is not connected?

Then unplug the device from its power source and wait for 1 minute. Reconnect all of the cords and test the system.

What to do if speaker suddenly cuts off?

If speaker plays sound and then suddenly cuts off, you may need to reconnect the wires. To reconnect wires, unplug all wires associated with the system and reconnect them.

Why does my Bose sound bar pop?

If popping sounds come through the soundbar, it may be caused by switching from a stereo channel to a surround sound channel. To fix this, remove the Bose soundbar wires from the television and run speaker wires to the cable box.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9