If the Inspect Cell Light is the only LED light flashing, then you can reset it by simply holding down the diagnostic button for 3 seconds, then release. The Inspect Cell indicator will now reset and will later come back on after another 500 hours of use. How Much Salt Belongs In Your Pool
How to change the salt memory on AquaLogic?
With the Aqualogic it's much easer. Go to diagnostics menu, hit right arrow until you see 'instant salt' (or 'instant minerals', depending on how your unit is set up), and then hit the + to save the new setting and erase the old memory. It won't affect the instant salt readings you are getting but will change the average salt reading.
How do I Reset my aquarite salt chlorination inspect cell?
Reset AquaRite Salt Chlorination Inspect Cell Light If the Inspect Cell Light is the only LED light flashing, then you can reset it by simply holding down the diagnostic button for 3 seconds, then release. The Inspect Cell indicator will now reset and will later come back on after another 500 hours of use. How Much Salt Belongs In Your Pool
What should I do if my AquaLogic display fuse is not working?
AquaLogic main boards had a 3amp violet ATO style fuse that protected the local display circuit. With power OFF, test the 2amp fuse integrated into the board. IF this fuse is not present, go to step 2D. IF fuse has continuity, proceed to step 2E. IF the fuse is damaged, replace the main board (see pg. 17).
How do I Reset my saltwater pool?
Salt only leaves the pool from backwashing a filter, splash out, leak or removing water from the pool. If the Inspect Cell Light is the only LED light flashing, then you can reset it by simply holding down the diagnostic button for 3 seconds, then release.
How do you reset an aqualogic salt cell?
Press the 'Menu' until, 'Default Menu' appears on the display. This menu is where the 'Inspect Cell' message is stored. Press the (>) key, repeatedly, until 'Inspect Cell, Hold + to reset' appears on the display.
How do I reset my aqua plus check system?
You must reset the system by entering the 'Diagnostic Menu' and then hitting the right arrow key once and then pushing the plus key once. This should reset the light and message.
How do I reset my Hayward chlorinator?
Reset AquaRite Salt Chlorination Inspect Cell Light If the Inspect Cell Light is the only LED light flashing, then you can reset it by simply holding down the diagnostic button for 3 seconds, then release. The Inspect Cell indicator will now reset and will later come back on after another 500 hours of use.
How do you program aqualogic?
0:3410:31Programming - Basic Configuration - Aqua Plus and Pro Logic - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo unlock a configuration menu press and hold the left and right arrow button simultaneously forMoreTo unlock a configuration menu press and hold the left and right arrow button simultaneously for approximately 5 seconds. Then press the right arrow key to enter the configuration menu.
How do I know if my salt chlorinator is working?
1:252:22Tip 3 - How to check if your salt cell is working - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhat we're doing here and we turn it on is we're looking for bubbles or a fizzing. Effect. Once weMoreWhat we're doing here and we turn it on is we're looking for bubbles or a fizzing. Effect. Once we see the bubbles. And the fizzing. We know that it's actually working.
How do I reset my Aqua Rite chlorine generator?
To reset, turn the unit to Off and then back to Auto. Wait for the relay to click (5 to 10 seconds).
How do I reset my pool chlorinator?
1:021:31Chlorinator reset. Having electrical issues with your Hayward unit. Pure ...YouTubeStart of suggested clipEnd of suggested clipThing press and hold the up and down button that will give it a reset that's going to fix a lot ofMoreThing press and hold the up and down button that will give it a reset that's going to fix a lot of those little electrical gremlin problems get you going.
How do I reset my Hayward Aqua Rite salt chlorine generator?
1:052:17Recalibrating an Aquarite Salt Chlorine Generator - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst step slide the main switch to the auto. Position. Second step push the diagnostic button untilMoreFirst step slide the main switch to the auto. Position. Second step push the diagnostic button until a T number appears on the display.
What should my Hayward salt chlorinator be set at?
Salt Systems work best with approximately 3200 parts per million (ppm) of salt, which is roughly the equivalent to a teaspoon of salt per gallon. However, all Hayward Salt Systems are designed to operate with salt levels anywhere from 2700 ppm to 3400 ppm.
What does chlorinator off no cell power mean?
'No Cell Power' means the current chlorinator cycle has been interrupted due to no voltage being detected when the cell power relay was turned on. Page 4. Turn off power to the controller.
How do I program my Hayward Pro Logic?
1:594:18ProLogic: Programming Timers - YouTubeYouTubeStart of suggested clipEnd of suggested clipPress the plus or minus button to set the start time during the programmed time the system willMorePress the plus or minus button to set the start time during the programmed time the system will automatically switch to the spa mode and turn on the filter pump.
How do you set the timer on a Hayward Aqua Plus?
0:280:51How to set time and the timer on a Hayward Aqua Plus or Aqua LogicYouTubeStart of suggested clipEnd of suggested clipButton timer menus right arrow key over adjust the time up or down. On that side adjust the time upMoreButton timer menus right arrow key over adjust the time up or down. On that side adjust the time up or down on this side this one runs seven to seven hope that was helpful thank you.
How long does it take for an inspection cell light to reset?
If the Inspect Cell Light is the only LED light flashing, then you can reset it by simply holding down the diagnostic button for 3 seconds, then release. The Inspect Cell indicator will now reset and will later come back on after another 500 hours of use.
What does the check salt light on a Hayward Aqua Rite mean?
If the “check salt” light is lit on a Hayward Aqua Rite salt chlorinator, it could mean a number of things. First, check the display salt reading – if it’s 2,700 ppm or lower, the check salt light will come on. We always recommend an independent salt level test. If the salt level is fine, inspect the Cell and clean if necessary.
Can you add salt to an Aqua Rite pool?
If the salt level is fine, inspect the Cell and clean if necessary. Never add salt without first having the water tested independent of the Aqua Rite reading. Salt only leaves the pool from backwashing a filter, splash out, leak or removing water from the pool.