How do I reset my Aprilaire humidifier control? Purchase only Genuine Aprilaire Water Panels to maintain performance. If your humidifier is equipped with an automatic control , after replacing the Water Panel, turn the control knob to the “Test/ Reset ” position until the “Change Water Panel” light blinks to reset the Water Panel change indicator timer.
How do I Set my Aprilaire humidifier control?
Your Aprilaire Humidifier Control is installed in the cold air return duct. During the first heating season,your Humidifier Control needs to be set initially to match your home’s condition. Please follow these steps when adjusting your control (refer to Figure A). 1. Turn the dial setting knob to “5,” which is within the normal range.
What is the warranty on my Aprilaire® humidifier?
10MODEL 550 Your Research Products Corporation Aprilaire®Humidifier unit is expressly warranted for one (1) year from date of installation to be free from defects except, however, for the disposable Water Panel which will have to be replaced from time to time depending upon the amount of use.
How do I reset the running time on my humidifier?
This running time is preset by the installer based on the humidifier model and water hardness. Refer to the Annual Maintenance section for instructions on changing the Water Panel or call your heating and air conditioning dealer for service. After the Water Panel is replaced, turn the Control knob to the “Test/Reset”
What do the lights on The Aprilaire digital humidifier control mean?
The Aprilaire digital humidifier control includes three indicator lights. A flashing yellow light (the change water panel indicator) means it is time to change the water panel in your Aprilaire humidifier.
How long does an Aprilaire humidifier last?
Why is my Aprilaire humidifier not getting water?
How to tell if humidity is too high?
How do I reset my Aprilaire auto humidifier Model 60?
Turn knob to “OFF.” • Set switch to Blower Activation “ON.” Turn the knob to “Test/Reset.” The “Humidifier On” light will illuminate. After 5 seconds, the green “Humidifier On” light will blink, indicating a system reset.
How do I reset my home humidifier?
Things You Will NeedSet the power dial to the “Reset” position.Unplug the device, remove the water tank and lift the tray from the base of the humidifier. ... Refill the water tank and reassemble the humidifier. ... Plug in the humidifier and set the power dial to “High.” The “Reset” light should turn off automatically.
Why is my Aprilaire not working?
If the water inlet valve is clogged or defective, the humidifer will not fill with water. Use a multimeter to test the valve for continuity. If the water inlet valve does not have continuity, replace it. In addition, test the incoming power to the valve.
How do I calibrate my Aprilaire humidifier?
Turn the control dial setting to the “Off” position. Then, slowly turn the dial clockwise until you hear the solenoid valve on the humidifier “click on.” Next, slowly turn the dial counter clockwise until you hear the solenoid valve “click off.” At this point, read the RH on the dial.
What is reset on humidifier?
NOTE: When the water tank is empty and the water in the Heating Chamber is almost empty, the Automatic Shut off will activate. The RESET Light will illuminate and the unit will not operate again until you refill the water tank and reset the humidifier. 1. Turn the power knob to RESET.
How do I know if my Aprilaire humidifier is working?
The click sound at the solenoid valve indicates there is electricity to the solenoid valve. By turning the dial of your manual humidistat to a setting above the “click point” you should see water coming out of the drain line within a few minutes which would indicate your humidifier is working.
How do I reset my aprilaire thermostat?
The thermostat has a memory backup that saves the thermostat's settings in case of a power interruption . The reset button located under the battery cover can be used to reset the thermostat back to factory defaults.
Why does my humidifier stop working?
When your humidifier stops vaporizing, even though it's still in working condition otherwise, It is most likely the presence of mold or mineral deposits that are affecting a humidifier's ability to vaporize. There is an almost fool-proof way to clean it out and get it working again!
Why is my humidistat not working?
Check The Control Panel Voltage Check the voltage on your humidistat control panel by turning your humidity settings very high or all the way up and use an ohm-meter to check the voltage. A voltage of zero means your humidistat is likely broken and it's time to replace your control panel.
What number should my Aprilaire humidifier be set at?
Your Aprilaire humidifier has a maximum relative humidity setting of 45 percent and a minimum of 10 percent. To go beyond these settings, you'll have to add room humidifiers or turn the system off, respectively.
What should my Aprilaire humidifier be set at in winter?
Your that's attached to your furnace or HVAC system is set based on relative humidity. A comfortable relative humidity for most homes throughout the summer, spring, and fall is between 30% and 50%. If you set your humidifier to this level, it should be comfortable for your home and family most of the year.
How do I set my humidifier thermostat?
0:412:15Adjusting Residential Humidifiers - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou should err on the side of a lower setting. Although it's ideal to maintain a relative humidityMoreYou should err on the side of a lower setting. Although it's ideal to maintain a relative humidity above 30 percent that level may lead to condensation.
Aprilaire Humidifier Troubleshooting & Repair | Repair Clinic
Don't call a repair professional. Instead, use Repair Clinic's troubleshooting guide to fix the problem with your Aprilaire Humidifier. We've got step-by-step instructions to get your humidifier working again.
Arnold’s Service - My Aprilaire 700 humidifier will not turn on ...
Posted on December 7, 2014 October 23, 2015 by Steve Arnold My Aprilaire 700 humidifier will not turn on. Water will not run or the power fan will not turn on. What could be the problem?
Troubleshooting Guide for Installers and Call Center
3 b. Verify internal wiring per Appendix A. c. Turn ON; ensure the On/Off green LED is lit. Humidifier will not produce steam unless there is a call for humidity.
Why is my Aprilaire humidifier not getting water?
The water inlet valve is an electrically-controlled valve that opens to allow water to enter the humidifier. If the water inlet valve is clogged or defective, the humidifer will not fill with water. Over time, the saddle valve can become clogged with sediment or calcium deposits.
How to tell if a humidifier is working?
First and foremost, when the humidifier turns on an audible click, followed by the sound of the humidifier fan should be heard. Additionally, water should be seen running through the drain tube at the bottom of the humidifier. Secondly, what should my aprilaire be set ...
How long does it take to connect to Aprilaire thermostat?
You may be able to connect to your thermostat remotely by logging into your account at my.aprilaire.com. This initial connection may take 2-3 minutes. Please contact your expert support team at Aprilaire at (800)-334-6011 or support@aprilaire.com for any additional assistance. Other popular Humidifier FAQs.
Where to put a Model 360 humidifier?
The Model 360 is our through-the-wall humidifier and can be placed in a central location of the home in a closet or laundry room where electricity, water and a drain are available. Humidified air is distributed through a grille on the humidifier into a hallway where the vapor will migrate throughout the home.
How to tell if a water solenoid valve is working?
Provided the humidity level in the home is not 45% or higher you can determine if the fan and water solenoid valve are working by simply make a call for humidity from the humidifier control while the HVAC system is making a heat call. If the humidity level is 45% or higher in the home the humidifier will not operate.
What is a Model 8476 thermostat?
The Model 8476 is a thermostat which in addition to controlling the temperature will operate the HVAC system fan for a specific schedule. The schedule options are: On -24/7, Circ (circulate), Event/3 hour, Allergy/24 hour and Auto.
Why is hot water needed in a humidifier?
When the humidifier is wired to operate on a heat or HVAC fan call, hot water is required as it is the only heat source for the evaporation process during an HVAC fan call. In addition hot water is required when the humidifier is connected to a heat pump. This is due to the lower plenum temperature in a heat pump.
Why is my water solenoid not making a click sound?
If the water solenoid valve does not making a click sound when the humidity level is increased while the HVAC system fan is operating, the solenoid valve may require replacement by the HVAC installer. The water solenoid valve may be tested by the HVAC installer by applying 24 volts to the water solenoid valve leeds.
Does Aprilaire have a food source?
None of the materials in Aprilaire humidifiers provide a food source. Even the paper Water Panel in Model 400 is treated with an anti-microbial agent. Most significantly however, the drain-through technology in Aprilaire evaporative humidifiers leaves no standing water once the humidifier turns off.
What is the difference between a digital humidistat and an analog humidistat?
The only difference is that the digital humidistat has the ability to bring on the furnace fan on a call for humidity whereas the analog humidistat must wait for a call for heat from the thermostat for the furnace fan to engage and then humidity can be automatically added to the home.
Can Aprilaire humidifiers be used in Oswego?
Aprilaire humidifiers can preserve many of the wood products in your Oswego, IL. home during the dry winter months. However, if not set properly, they may produce more moisture than your home needs and if left unchecked for too long may eventually cause damage.
How long does an Aprilaire humidifier last?
The model 400 and 400M models require replacing the water panel every 3 months during the humidifier season.
Why is my Aprilaire humidifier not getting water?
The water inlet valve is an electrically-controlled valve that opens to allow water to enter the humidifier. If the water inlet valve is clogged or defective, the humidifer will not fill with water. Over time, the saddle valve can become clogged with sediment or calcium deposits.
How to tell if humidity is too high?
Check the humidity and reduce it immediately if the room feels particularly dense and moist, curtains and pillows feel damp, or condensation is building up on windows or window sills , which are all signs that the humidity is too high in the room.