how do i reset my access master garage door opener

by Adan Howell Published 3 years ago Updated 2 years ago

^{How do I reset my access Master garage door opener?}

Press and release the "learn" button on the motor unit.
Within 30 seconds, press and hold the button on the hand-held remote that you wish to operate your garage door.
Release the button when the motor unit light blinks.

If you must reset or clear the memory from your garage door opener, follow these steps:

Access your garage door opener.
Find the “Learn” button.
Push the button for around six seconds.
Wait for the LED light to blink or go out.
Reprogram the necessary codes.

Aug 31, 2021

Full Answer

How to program access master garage door?

Instructions are described below:

Press and release the "learn" button on the motor unit. This can be found where you see the antenna wire hanging from the motor head (you may have to take ...
Within 30 seconds, press and hold the button on the hand-held remote that you wish to operate your garage door.
Release the button when the motor unit light blinks. It has learned the code. ...

How do I reset my garage door opener?

Reset Garage Door using Opener Unit

What you need to do first is find the button inside the newer garage opening units named ‘Home’ or ‘Learn.’ Use the button for resetting the opener.
You will see another button next to it; the LED has different colors depending on the brand. ...
You need to open the door of the opener unit to use the ‘Learn’ button. ...

How to reset garage door opener after manually opening?

This puts your opener into Programming Mode, which allows you to reset the device.
The positions of your buttons may differ in certain Genie models. ...
Keep in mind that the opener is the boxed device attached to your garage ceiling, while the remote refers to the smaller, pocket-sized device with 1-2 buttons.

How to setup garage door opener?

Prepare your garage door for opener installation.

The weight of a garage door is supported by the door springs, cables, and pulleys, not the opener. ...
Remove all ropes or cords attached to the garage door so you won't get tangled in them during installation.
Deactivate or remove all existing garage door locks, so they won't accidentally engage and either damage the opener or cause personal injury.

How do I reset my access master garage opener?

Resetting your Access Master garage door opener will delete all access codes from the opener's memory....To reset your garage door opener:Locate the 'Learn' button at the back of the motor unit.Next, press and hold the 'Learn' button for about six seconds. ... When the LED Learn light goes out, release the 'Learn' button.More items...•

Is there a reset button on a garage door opener?

Resetting Newer Openers To reset the system, you will need to locate the button on the motor that reads “Learn” or “Home.” In many cases, this button will be located on the same side as the device's antenna and next to an LED. LED colors range by brand and model.

How do I reprogram my access Master garage door opener keypad?

Programming a Keypad PINBe sure to clear the garage door area of any obstructions.Locate the LEARN button on the door control.Press the LEARN button twice. The LED will flash.Enter a 4-digit PIN of your choice on the keypad, and press ENTER.The opener lights will blink, indicating the PIN programming is complete.

Does unplugging your garage door opener reset it?

Reset Garage Door Opener The first thing you will likely need to do in order to reset your garage door is to unplug it or shut off the breaker that it is connected to. This will shut off power to the door entirely. From there, you should wait at least ten seconds before turning the power to the door itself back on.

Why is my garage door opener not working?

If the garage door won't open or close, begin with these garage door troubleshooting steps: Make sure the opener is plugged in and the garage circuit breaker is in the correct place. Make sure your door has not been manually locked by mistake. Replace the batteries of the keypad or remote control.

Where is the Learn button on access master?

The "Learn" button on your garage door opener is located above the antenna wire that hangs from the motorhead, it may also be under a light cover. The "Learn" button will be either green, red/orange, purple or yellow.

How do you reset the code on a LiftMaster keypad?

0:010:56How to Change the PIN for Your LiftMaster Keyless Entry, Model ...YouTubeStart of suggested clipEnd of suggested clipPress and hold the pound sign button the light on your garage door opener will flash twice. NowMorePress and hold the pound sign button the light on your garage door opener will flash twice. Now enter a new pin on the keypad. You may use any four digits you like press and hold the enter.

Where is the Learn button on Access Master garage door opener?

0:000:42How to locate the learn/program button on your garage door openerYouTubeStart of suggested clipEnd of suggested clipSimply open up the light cover if it has one. And then getting up at eye level. You. Can look andMoreSimply open up the light cover if it has one. And then getting up at eye level. You. Can look and find the program button on this unit we see it here on the right side near the group of wires.

Why Need to Reset Garage Door Opener?

Resetting your garage door opener from time to time is crucial. It could be helpful if you lost your garage door opener.

Reset Garage Door using Opener Unit

You can reset your garage door opener using the garage opener unit installed in your garage.

How does Garage Door Opener Works?

Previously, the old garage door openers rely on radio frequencies and DIP switches. There are the latest wireless garage door openers today. So, they can work through programming. Besides, multiple openers can open all doors in one home. Suppose the frequency or wireless signal of your garage door opener interferes with any other household devices.

How to Reset Garage Door Opener with DIP System?

The DIP system has a remote to connect the garage door opener with switches on the small and the central unit. You can check the switch position to see if it matches by removing the outer cover. If they do not match, you can use a pen or pencil to make them identical by sliding the switches on the remote.

Resetting your Garage Door Opener is Easy

Your garage door opener is part of your home security system. Suppose you are facing a security issue with your opener. In that case, you should reset it immediately to protect yourself from any potential damage. Garage door openers have many benefits that ensure easy access, control, and high security.

Take Away

Resetting an electrical garage door opener is essential to increasing your security and gives you complete peace of mind. It is easy to reset and allows complete control while improving security. Garage door openers have different features, so you must consider all features thoroughly before choosing the best for you.

How to make sure garage door doesn't open?

Safely climb down from the ladder. Then, fetch your garage door’s remote control opener. Click the button to check and make sure that the garage door does not open. If you de-linked any smart devices, double check those to make sure they can’t still open your garage door either.

Can a Liftmaster garage door opener be used on a new garage door?

However, if you move homes, get a new garage door, or install a new garage door opener on your existing garage doors, the remote door opener will no longer work.

How to program AccessMaster Contractor Series door opener?

To program from the door opener, press the "Learn" button on the opener, which may be in various locations depending upon the model. A nearby light will illuminate. Press and hold the "Open" button on the remote within 30 seconds, letting go after the opener clicks twice or its lights blink.

How to program AccessMaster remote to control garage lights?

To program the remote, make sure the garage door is closed, then press the remote button you've designated to control the lights. While holding the designated remote button, press and hold the "Light" button on the door-control panel as well as its "Lock" button. Release all three buttons once the door opener clicks twice or flashes its lights.

How to code a remote for a garage door opener?

To code the remote from the opener itself, place a sturdy step ladder beneath the opener. Climb the ladder, then push and quickly release the "Learn" button on the opener housing. A light next to the button should illuminate after pressing the button. Within 30 seconds, press and hold the desired "Open" button on the remote.

What is the yellow button on a garage door opener?

Some AccessMaster garage door openers have both a yellow antenna and a yellow "Learn" button. These models may be programmed from the opener itself or from the door-control panel. In either case, make sure the remote has functional batteries installed.

Access the door motor

The very first step in resetting the garage door opener starts with accessing the motor. Take a ladder and put it in front of the garage door. Climb the ladder to make easy access to the door-motor.

Erase machine memory for all saved records

In this step, you are going to erase the motor’s memory to get all data related to remotes and other non-key methods.

Test the remotes

Well after doing all this hard job you must test the remote to make sure it’s delinked.

Reset Chamberlain Garage Door Opener

Reset your Chamberlain garage door opener by pressing and holding the LEARN button on your motor housing for 6 seconds, until the LED light goes out. When the LED goes out, all remote control and keyless entry codes will be erased. To confirm, try using your remote. It shouldn’t work.

Support and Manuals

If you’re stuck on any of the steps above you’ll want to reference the manual for your specific Chamberlain garage door opener.

Conclusion

If your Chamberlain garage door opener is malfunctioning or if you’ve lost a remote or it was stolen, you should reset your opener.

Popular Posts:

1. ejemplos de estrofas en un poema

2. 30 cent to sq ft

3. what size water lines are in rv

4. is destiny 2 a 2 player game

5. failed nclex 10 times

6. how long can a frozen dinner sit out

7. accidentes recientes cerca de mi

8. how long can you leave bleach on a shirt

9. ikea helpline number india

10. where can i find newsmax on tv

Params
0	`post`
1	`postContent`
2	`author`
3	`updated_at`
4	`bing_rich_snippet_text`
5	`bing_rich_snippet_link`
6	`bing_related_keywords`
7	`google_related_keywords`
8	`bing_news_title`
9	`bing_news_description`
10	`bing_videos`
11	`bing_images`
12	`bing_search_result_title`
13	`bing_search_result_description`
14	`bing_search_result_url`
15	`bing_paa_questions`
16	`bing_paa_answers`
17	`bing_slider_faq_questions`
18	`bing_slider_faq_answers`
19	`bing_pop_faq_questions`
20	`bing_pop_faq_answers`
21	`bing_tab_faq_questions`
22	`bing_tab_faq_answers`
23	`google_faq_questions`
24	`google_faq_answers`
25	`google_rich_snippet`
26	`google_search_result`
27	`indexedArray`
28	`total_images`
29	`total_videos`
30	`settings`
31	`url_current`
32	`menus`
33	`sidebar`

Params

post

postContent

author

updated_at

bing_rich_snippet_text

bing_rich_snippet_link

bing_related_keywords

google_related_keywords

bing_news_title

bing_news_description

bing_videos

bing_images

bing_search_result_title

bing_search_result_description

bing_search_result_url

bing_paa_questions

bing_paa_answers

bing_slider_faq_questions

bing_slider_faq_answers

bing_pop_faq_questions

bing_pop_faq_answers

bing_tab_faq_questions

bing_tab_faq_answers

google_faq_questions

google_faq_answers

google_rich_snippet

google_search_result

indexedArray

total_images

total_videos

settings

url_current

menus

sidebar

Params
0	`__env`
1	`app`
2	`errors`
3	`post`
4	`postContent`
5	`author`
6	`updated_at`
7	`bing_rich_snippet_text`
8	`bing_rich_snippet_link`
9	`bing_related_keywords`
10	`google_related_keywords`
11	`bing_news_title`
12	`bing_news_description`
13	`bing_videos`
14	`bing_images`
15	`bing_search_result_title`
16	`bing_search_result_description`
17	`bing_search_result_url`
18	`bing_paa_questions`
19	`bing_paa_answers`
20	`bing_slider_faq_questions`
21	`bing_slider_faq_answers`
22	`bing_pop_faq_questions`
23	`bing_pop_faq_answers`
24	`bing_tab_faq_questions`
25	`bing_tab_faq_answers`
26	`google_faq_questions`
27	`google_faq_answers`
28	`google_rich_snippet`
29	`google_search_result`
30	`indexedArray`
31	`total_images`
32	`total_videos`
33	`settings`
34	`url_current`
35	`menus`
36	`sidebar`
37	`i`
38	`__currentLoopData`
39	`loop`
40	`item`

Params

__env

app

errors

post

postContent

author

updated_at

bing_rich_snippet_text

bing_rich_snippet_link

bing_related_keywords

google_related_keywords

bing_news_title

bing_news_description

bing_videos

bing_images

bing_search_result_title

bing_search_result_description

bing_search_result_url

bing_paa_questions

bing_paa_answers

bing_slider_faq_questions

bing_slider_faq_answers

bing_pop_faq_questions

bing_pop_faq_answers

bing_tab_faq_questions

bing_tab_faq_answers

google_faq_questions

google_faq_answers

google_rich_snippet

google_search_result

indexedArray

total_images

total_videos

settings

url_current

menus

sidebar

__currentLoopData

loop

item

Params
0	`__env`
1	`app`
2	`errors`
3	`post`
4	`postContent`
5	`author`
6	`updated_at`
7	`bing_rich_snippet_text`
8	`bing_rich_snippet_link`
9	`bing_related_keywords`
10	`google_related_keywords`
11	`bing_news_title`
12	`bing_news_description`
13	`bing_videos`
14	`bing_images`
15	`bing_search_result_title`
16	`bing_search_result_description`
17	`bing_search_result_url`
18	`bing_paa_questions`
19	`bing_paa_answers`
20	`bing_slider_faq_questions`
21	`bing_slider_faq_answers`
22	`bing_pop_faq_questions`
23	`bing_pop_faq_answers`
24	`bing_tab_faq_questions`
25	`bing_tab_faq_answers`
26	`google_faq_questions`
27	`google_faq_answers`
28	`google_rich_snippet`
29	`google_search_result`
30	`indexedArray`
31	`total_images`
32	`total_videos`
33	`settings`
34	`url_current`
35	`menus`
36	`sidebar`
37	`i`
38	`__currentLoopData`
39	`loop`
40	`item`

Params

__env

app

errors

post

postContent

author

updated_at

bing_rich_snippet_text

bing_rich_snippet_link

bing_related_keywords

google_related_keywords

bing_news_title

bing_news_description

bing_videos

bing_images

bing_search_result_title

bing_search_result_description

bing_search_result_url

bing_paa_questions

bing_paa_answers

bing_slider_faq_questions

bing_slider_faq_answers

bing_pop_faq_questions

bing_pop_faq_answers

bing_tab_faq_questions

bing_tab_faq_answers

google_faq_questions

google_faq_answers

google_rich_snippet

google_search_result

indexedArray

total_images

total_videos

settings

url_current

menus

sidebar

__currentLoopData

loop

item

Params
0	`__env`
1	`app`
2	`errors`
3	`post`
4	`postContent`
5	`author`
6	`updated_at`
7	`bing_rich_snippet_text`
8	`bing_rich_snippet_link`
9	`bing_related_keywords`
10	`google_related_keywords`
11	`bing_news_title`
12	`bing_news_description`
13	`bing_videos`
14	`bing_images`
15	`bing_search_result_title`
16	`bing_search_result_description`
17	`bing_search_result_url`
18	`bing_paa_questions`
19	`bing_paa_answers`
20	`bing_slider_faq_questions`
21	`bing_slider_faq_answers`
22	`bing_pop_faq_questions`
23	`bing_pop_faq_answers`
24	`bing_tab_faq_questions`
25	`bing_tab_faq_answers`
26	`google_faq_questions`
27	`google_faq_answers`
28	`google_rich_snippet`
29	`google_search_result`
30	`indexedArray`
31	`total_images`
32	`total_videos`
33	`settings`
34	`url_current`
35	`menus`
36	`sidebar`
37	`i`
38	`__currentLoopData`
39	`loop`
40	`item`

Params

__env

app

errors

post

postContent

author

updated_at

bing_rich_snippet_text

bing_rich_snippet_link

bing_related_keywords

google_related_keywords

bing_news_title

bing_news_description

bing_videos

bing_images

bing_search_result_title

bing_search_result_description

bing_search_result_url

bing_paa_questions

bing_paa_answers

bing_slider_faq_questions

bing_slider_faq_answers

bing_pop_faq_questions

bing_pop_faq_answers

bing_tab_faq_questions

bing_tab_faq_answers

google_faq_questions

google_faq_answers

google_rich_snippet

google_search_result

indexedArray

total_images

total_videos

settings

url_current

menus

sidebar

__currentLoopData

loop

item

Params
0	`__env`
1	`app`
2	`errors`
3	`post`
4	`postContent`
5	`author`
6	`updated_at`
7	`bing_rich_snippet_text`
8	`bing_rich_snippet_link`
9	`bing_related_keywords`
10	`google_related_keywords`
11	`bing_news_title`
12	`bing_news_description`
13	`bing_videos`
14	`bing_images`
15	`bing_search_result_title`
16	`bing_search_result_description`
17	`bing_search_result_url`
18	`bing_paa_questions`
19	`bing_paa_answers`
20	`bing_slider_faq_questions`
21	`bing_slider_faq_answers`
22	`bing_pop_faq_questions`
23	`bing_pop_faq_answers`
24	`bing_tab_faq_questions`
25	`bing_tab_faq_answers`
26	`google_faq_questions`
27	`google_faq_answers`
28	`google_rich_snippet`
29	`google_search_result`
30	`indexedArray`
31	`total_images`
32	`total_videos`
33	`settings`
34	`url_current`
35	`menus`
36	`sidebar`
37	`i`
38	`__currentLoopData`
39	`loop`
40	`item`

Params

__env

app

errors

post

postContent

author

updated_at

bing_rich_snippet_text

bing_rich_snippet_link

bing_related_keywords

google_related_keywords

bing_news_title

bing_news_description

bing_videos

bing_images

bing_search_result_title

bing_search_result_description

bing_search_result_url

bing_paa_questions

bing_paa_answers

bing_slider_faq_questions

bing_slider_faq_answers

bing_pop_faq_questions

bing_pop_faq_answers

bing_tab_faq_questions

bing_tab_faq_answers

google_faq_questions

google_faq_answers

google_rich_snippet

google_search_result

indexedArray

total_images

total_videos

settings

url_current

menus

sidebar

__currentLoopData

loop

item

Params
0	`__env`
1	`app`
2	`errors`
3	`post`
4	`postContent`
5	`author`
6	`updated_at`
7	`bing_rich_snippet_text`
8	`bing_rich_snippet_link`
9	`bing_related_keywords`
10	`google_related_keywords`
11	`bing_news_title`
12	`bing_news_description`
13	`bing_videos`
14	`bing_images`
15	`bing_search_result_title`
16	`bing_search_result_description`
17	`bing_search_result_url`
18	`bing_paa_questions`
19	`bing_paa_answers`
20	`bing_slider_faq_questions`
21	`bing_slider_faq_answers`
22	`bing_pop_faq_questions`
23	`bing_pop_faq_answers`
24	`bing_tab_faq_questions`
25	`bing_tab_faq_answers`
26	`google_faq_questions`
27	`google_faq_answers`
28	`google_rich_snippet`
29	`google_search_result`
30	`indexedArray`
31	`total_images`
32	`total_videos`
33	`settings`
34	`url_current`
35	`menus`
36	`sidebar`
37	`i`
38	`__currentLoopData`
39	`loop`
40	`item`

Params

__env

app

errors

post

postContent

author

updated_at

bing_rich_snippet_text

bing_rich_snippet_link

bing_related_keywords

google_related_keywords

bing_news_title

bing_news_description

bing_videos

bing_images

bing_search_result_title

bing_search_result_description

bing_search_result_url

bing_paa_questions

bing_paa_answers

bing_slider_faq_questions

bing_slider_faq_answers

bing_pop_faq_questions

bing_pop_faq_answers

bing_tab_faq_questions

bing_tab_faq_answers

google_faq_questions

google_faq_answers

google_rich_snippet

google_search_result

indexedArray

total_images

total_videos

settings

url_current

menus

sidebar

__currentLoopData

loop

item

Params
0	`__env`
1	`app`
2	`errors`
3	`post`
4	`postContent`
5	`author`
6	`updated_at`
7	`bing_rich_snippet_text`
8	`bing_rich_snippet_link`
9	`bing_related_keywords`
10	`google_related_keywords`
11	`bing_news_title`
12	`bing_news_description`
13	`bing_videos`
14	`bing_images`
15	`bing_search_result_title`
16	`bing_search_result_description`
17	`bing_search_result_url`
18	`bing_paa_questions`
19	`bing_paa_answers`
20	`bing_slider_faq_questions`
21	`bing_slider_faq_answers`
22	`bing_pop_faq_questions`
23	`bing_pop_faq_answers`
24	`bing_tab_faq_questions`
25	`bing_tab_faq_answers`
26	`google_faq_questions`
27	`google_faq_answers`
28	`google_rich_snippet`
29	`google_search_result`
30	`indexedArray`
31	`total_images`
32	`total_videos`
33	`settings`
34	`url_current`
35	`menus`
36	`sidebar`
37	`i`
38	`__currentLoopData`
39	`loop`
40	`item`

Params

__env

app

errors

post

postContent

author

updated_at

bing_rich_snippet_text

bing_rich_snippet_link

bing_related_keywords

google_related_keywords

bing_news_title

bing_news_description

bing_videos

bing_images

bing_search_result_title

bing_search_result_description

bing_search_result_url

bing_paa_questions

bing_paa_answers

bing_slider_faq_questions

bing_slider_faq_answers

bing_pop_faq_questions

bing_pop_faq_answers

bing_tab_faq_questions

bing_tab_faq_answers

google_faq_questions

google_faq_answers

google_rich_snippet

google_search_result

indexedArray

total_images

total_videos

settings

url_current

menus

sidebar

__currentLoopData

loop

item

Metadata
Bindings	0. 2025-06-18 03:44:05 1. how-do-i-reset-my-access-master-garage-door-opener
Backtrace	15. /app/Providers/RouteServiceProvider.php:54 18. /vendor/laravel/framework/src/Illuminate/Routing/Router.php:842 19. Route binding:39 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167 21. /vendor/laravel/framework/src/Illuminate/Foundation/Http/Middleware/VerifyCsrfToken.php:78

Metadata

Bindings

0. 2025-06-18 03:44:05
1. how-do-i-reset-my-access-master-garage-door-opener

Backtrace

15. /app/Providers/RouteServiceProvider.php:54
18. /vendor/laravel/framework/src/Illuminate/Routing/Router.php:842
19. Route binding:39
20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
21. /vendor/laravel/framework/src/Illuminate/Foundation/Http/Middleware/VerifyCsrfToken.php:78

Metadata
Bindings	0. 164245 1. 0
Backtrace	19. middleware::checkdate:30 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167 21. /vendor/laravel/jetstream/src/Http/Middleware/ShareInertiaData.php:61 22. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167 23. /vendor/laravel/framework/src/Illuminate/Routing/Middleware/SubstituteBindings.php:50

Metadata

Bindings

0. 164245
1. 0

Backtrace

19. middleware::checkdate:30
20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
21. /vendor/laravel/jetstream/src/Http/Middleware/ShareInertiaData.php:61
22. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
23. /vendor/laravel/framework/src/Illuminate/Routing/Middleware/SubstituteBindings.php:50

Metadata
Bindings	0. header
Backtrace	15. /vendor/outl1ne/nova-menu-builder/src/helpers.php:32 17. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54 18. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45 19. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261 20. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:205

Metadata

Bindings

0. header

Backtrace

15. /vendor/outl1ne/nova-menu-builder/src/helpers.php:32
17. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
18. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
19. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
20. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:205

Metadata
Bindings	0. 1
Backtrace	19. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35 20. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33 22. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54 23. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45 24. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261

Metadata

Bindings

0. 1

Backtrace

19. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
20. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
22. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
23. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
24. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261

Metadata
Backtrace	24. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35 25. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33 27. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54 28. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45 29. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261

Metadata

Backtrace

24. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
25. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
27. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
28. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
29. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261

Metadata
Bindings	0. publish
Backtrace	14. /app/View/Composers/SidebarView.php:22 15. /app/View/Composers/SidebarView.php:12 16. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:124 17. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:162 20. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:177

Metadata

Bindings

0. publish

Backtrace

14. /app/View/Composers/SidebarView.php:22
15. /app/View/Composers/SidebarView.php:12
16. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:124
17. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:162
20. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:177

Metadata
Bindings	0. 8802
Backtrace	21. view::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15 23. /vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:108 24. /vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58 25. /vendor/livewire/livewire/src/ComponentConcerns/RendersLivewireComponents.php:69 26. /vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:61

Metadata

Bindings

0. 8802

Backtrace

21. view::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15
23. /vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:108
24. /vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
25. /vendor/livewire/livewire/src/ComponentConcerns/RendersLivewireComponents.php:69
26. /vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:61

0 of 0

array:25 [▼"cookie" => array:1 [▶ 0 => "_pk_id.64.7c30=0dedeb432428012a.1750198439.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6IlkzeFU4TFpvaXQwYS9IcGw4VFJMTGc9PSIsInZhbHVlIjoiSFZmVFVVQ2J2ZkJhcjVRR1djNW91WEx2aGRvZmh4SklVZWI1dWlZMGtiOVROYUFJSjFZM3A4K2lINi9abTJKbzJkdk90RTJJSlRiM29ubHB6c1Z4Nk5oZEU1SkQxTVhtZXVvTU1VSTFuU0tGRSsySFZ4a3FkZSt2emd5TCtMalkiLCJtYWMiOiIxMjgwNDNlYWFjNDk5YWFmNTc4YzhiNDlmZTQ1ZDhlZGNmNjk4NjY1NTJjNmM3NGY3MjI5YTQxMjk2NjMyMjIxIiwidGFnIjoiIn0%3D; askhelpdesk_session=eyJpdiI6ImsvN3Z1NXBldkpWeWhkcnUydlBWZFE9PSIsInZhbHVlIjoicFhVOGw2Z0s4ZVhOZHNpNE41ZlJHMGE1TExWQmhDU0dzOEVjMXVkOEJZM0kxUmtGbjdxajQwbFQ4T3JjR0V1VjkwenZYaEN5ZE9jemwrTVR2UExnb1ZQQnAxM2ExZ0t4T0RlS0lQQVlraWpwQjJnTWpxWE5kaGloczNjaDkyTzgiLCJtYWMiOiI0ZDIzYTI4YjAwNjI5ZDIxMzQ1YmVlNTMwZmE4ZmNjNjY3MDU3MTQ4MWVkZGUzODcwMmJkM2ZiOWU1ZjNlZDM3IiwidGFnIjoiIn0%3D ◀_pk_id.64.7c30=0dedeb432428012a.1750198439.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6IlkzeFU4TFpvaXQwYS9IcGw4VFJMTGc9PSIsInZhbHVlIjoiSFZmVFVVQ2J2ZkJhcjVRR1djNW91W ▶" ] "cf-ipcountry" => array:1 [▶ 0 => "US" ] "cf-connecting-ip" => array:1 [▶ 0 => "216.73.216.186" ] "cdn-loop" => array:1 [▶ 0 => "cloudflare; loops=1" ] "sec-fetch-mode" => array:1 [▶ 0 => "navigate" ] "sec-fetch-site" => array:1 [▶ 0 => "none" ] "accept" => array:1 [▶ 0 => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" ] "user-agent" => array:1 [▶ 0 => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" ] "upgrade-insecure-requests" => array:1 [▶ 0 => "1" ] "sec-ch-ua-platform" => array:1 [▶ 0 => ""Windows"" ] "sec-ch-ua-mobile" => array:1 [▶ 0 => "?0" ] "sec-ch-ua" => array:1 [▶ 0 => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" ] "cache-control" => array:1 [▶ 0 => "no-cache" ] "pragma" => array:1 [▶ 0 => "no-cache" ] "accept-encoding" => array:1 [▶ 0 => "gzip, br" ] "cf-ray" => array:1 [▶ 0 => "9515e5deaf76f92b-ORD" ] "priority" => array:1 [▶ 0 => "u=0, i" ] "sec-fetch-dest" => array:1 [▶ 0 => "document" ] "sec-fetch-user" => array:1 [▶ 0 => "?1" ] "cf-visitor" => array:1 [▶ 0 => "{"scheme":"https"}" ] "connection" => array:1 [▶ 0 => "close" ] "x-forwarded-proto" => array:1 [▶ 0 => "https" ] "x-forwarded-for" => array:1 [▶ 0 => "216.73.216.186, 172.69.6.206" ] "x-server-addr" => array:1 [▶ 0 => "154.12.239.204" ] "host" => array:1 [▶ 0 => "receivinghelpdesk.com" ]]

0 of 0

array:56 [▼"USER" => "runcloud" "HOME" => "/home/runcloud" "SCRIPT_NAME" => "/ask/index.php" "REQUEST_URI" => "/ask/how-do-i-reset-my-access-master-garage-door-opener" "QUERY_STRING" => "" "REQUEST_METHOD" => "GET" "SERVER_PROTOCOL" => "HTTP/1.0" "GATEWAY_INTERFACE" => "CGI/1.1" "REDIRECT_URL" => "/ask/how-do-i-reset-my-access-master-garage-door-opener" "REMOTE_PORT" => "56242" "SCRIPT_FILENAME" => "/home/runcloud/webapps/ReceivingHelpDesk/ask/index.php" "SERVER_ADMIN" => "you@example.com" "CONTEXT_DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "CONTEXT_PREFIX" => "" "REQUEST_SCHEME" => "http" "DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "REMOTE_ADDR" => "172.69.6.206" "SERVER_PORT" => "80" "SERVER_ADDR" => "127.0.0.1" "SERVER_NAME" => "receivinghelpdesk.com" "SERVER_SOFTWARE" => "Apache/2.4.63 (Unix) OpenSSL/1.1.1f" "SERVER_SIGNATURE" => "" "LD_LIBRARY_PATH" => "/RunCloud/Packages/apache2-rc/lib" "PATH" => "/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" "HTTP_COOKIE" => "_pk_id.64.7c30=0dedeb432428012a.1750198439.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6IlkzeFU4TFpvaXQwYS9IcGw4VFJMTGc9PSIsInZhbHVlIjoiSFZmVFVVQ2J2ZkJhcjVRR1djNW91WEx2aGRvZmh4SklVZWI1dWlZMGtiOVROYUFJSjFZM3A4K2lINi9abTJKbzJkdk90RTJJSlRiM29ubHB6c1Z4Nk5oZEU1SkQxTVhtZXVvTU1VSTFuU0tGRSsySFZ4a3FkZSt2emd5TCtMalkiLCJtYWMiOiIxMjgwNDNlYWFjNDk5YWFmNTc4YzhiNDlmZTQ1ZDhlZGNmNjk4NjY1NTJjNmM3NGY3MjI5YTQxMjk2NjMyMjIxIiwidGFnIjoiIn0%3D; askhelpdesk_session=eyJpdiI6ImsvN3Z1NXBldkpWeWhkcnUydlBWZFE9PSIsInZhbHVlIjoicFhVOGw2Z0s4ZVhOZHNpNE41ZlJHMGE1TExWQmhDU0dzOEVjMXVkOEJZM0kxUmtGbjdxajQwbFQ4T3JjR0V1VjkwenZYaEN5ZE9jemwrTVR2UExnb1ZQQnAxM2ExZ0t4T0RlS0lQQVlraWpwQjJnTWpxWE5kaGloczNjaDkyTzgiLCJtYWMiOiI0ZDIzYTI4YjAwNjI5ZDIxMzQ1YmVlNTMwZmE4ZmNjNjY3MDU3MTQ4MWVkZGUzODcwMmJkM2ZiOWU1ZjNlZDM3IiwidGFnIjoiIn0%3D ◀_pk_id.64.7c30=0dedeb432428012a.1750198439.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6IlkzeFU4TFpvaXQwYS9IcGw4VFJMTGc9PSIsInZhbHVlIjoiSFZmVFVVQ2J2ZkJhcjVRR1djNW91W ▶" "HTTP_CF_IPCOUNTRY" => "US" "HTTP_CF_CONNECTING_IP" => "216.73.216.186" "HTTP_CDN_LOOP" => "cloudflare; loops=1" "HTTP_SEC_FETCH_MODE" => "navigate" "HTTP_SEC_FETCH_SITE" => "none" "HTTP_ACCEPT" => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" "HTTP_USER_AGENT" => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" "HTTP_UPGRADE_INSECURE_REQUESTS" => "1" "HTTP_SEC_CH_UA_PLATFORM" => ""Windows"" "HTTP_SEC_CH_UA_MOBILE" => "?0" "HTTP_SEC_CH_UA" => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" "HTTP_CACHE_CONTROL" => "no-cache" "HTTP_PRAGMA" => "no-cache" "HTTP_ACCEPT_ENCODING" => "gzip, br" "HTTP_CF_RAY" => "9515e5deaf76f92b-ORD" "HTTP_PRIORITY" => "u=0, i" "HTTP_SEC_FETCH_DEST" => "document" "HTTP_SEC_FETCH_USER" => "?1" "HTTP_CF_VISITOR" => "{"scheme":"https"}" "HTTP_CONNECTION" => "close" "HTTP_X_FORWARDED_PROTO" => "https" "HTTP_X_FORWARDED_FOR" => "216.73.216.186, 172.69.6.206" "HTTP_X_SERVER_ADDR" => "154.12.239.204" "HTTP_HOST" => "receivinghelpdesk.com" "HTTPS" => "on" "REDIRECT_STATUS" => "200" "REDIRECT_HTTPS" => "on" "FCGI_ROLE" => "RESPONDER" "PHP_SELF" => "/ask/index.php" "REQUEST_TIME_FLOAT" => 1750198445.8818 "REQUEST_TIME" => 1750198445]

0 of 0

array:4 [▼"_pk_id_64_7c30" => null "_pk_ses_64_7c30" => null "XSRF-TOKEN" => "QOUJDT4XS4icYRFXb0TfPvROOH0TnwYcyE1qQxpS" "askhelpdesk_session" => "QIPwTtbASuVQvG3RF9IDl7ZBvgTyOtCQu0GQ4K0s"]

0 of 0

array:7 [▼"content-type" => array:1 [▶ 0 => "text/html; charset=UTF-8" ] "cache-control" => array:1 [▶ 0 => "private, must-revalidate" ] "date" => array:1 [▶ 0 => "Tue, 17 Jun 2025 22:14:06 GMT" ] "pragma" => array:1 [▶ 0 => "no-cache" ] "expires" => array:1 [▶ 0 => -1 ] "set-cookie" => array:2 [▶ 0 => "XSRF-TOKEN=eyJpdiI6Ik1zSnhtaEpWN3NLOWtTdy83Tjdpb0E9PSIsInZhbHVlIjoiSVpXMWpoUnl5R01hanQrWEI1UXFNZ25ZSUpFc3d3ZGVtVU9pQ3BrVXBKWHZoQ2NOdThKeUNnenZMZzZlbFNHeTRab2E1TWY3eGZZMTNFSHFKS0QrdmdkZkdBaXBzL0hjNXE5MEZYM3FGZnBKUUFZWDBteklwRFVsZm8wRWpSek8iLCJtYWMiOiIxNGMwMGRjYjIwODhjNWNjMjNmYTkxNzAyOTVhNmE1NjlmNTVjMTU3N2VhMTE4MmRhOGQ2OTc0OTU2YzBmNDExIiwidGFnIjoiIn0%3D; expires=Wed, 18-Jun-2025 00:14:06 GMT; Max-Age=7200; path=/; samesite=lax ◀XSRF-TOKEN=eyJpdiI6Ik1zSnhtaEpWN3NLOWtTdy83Tjdpb0E9PSIsInZhbHVlIjoiSVpXMWpoUnl5R01hanQrWEI1UXFNZ25ZSUpFc3d3ZGVtVU9pQ3BrVXBKWHZoQ2NOdThKeUNnenZMZzZlbFNHeTRab2E1T ▶" 1 => "askhelpdesk_session=eyJpdiI6IjZPVVlyS2lYTUxEVDY1T3BadGN6Nmc9PSIsInZhbHVlIjoiNWNoVHdxN2ZGRkd5ckZMVnYxVktFOVc2NERNOElYN2IzUCtaMGNrc0JpTk00TUZ2cEhHNkl4d25hK1VkbXZBSmNYclR0aE0xKzMwSzFBM0ZOUSt5VlRPZmhidW1qckkrc2djWklLZnArcWN2ZlhPUHhsY0hvWUlGWlRrK0lsb2giLCJtYWMiOiI2YTliYTdmMTgwZDNjMTY4YTk3NmRkYTQwNTAwNWFkNzIyMDJkOGRmYWJmMWY1ZmQwNjg0ZjBiMDYyYzI1ZWZlIiwidGFnIjoiIn0%3D; expires=Wed, 18-Jun-2025 00:14:06 GMT; Max-Age=7200; path=/; httponly; samesite=lax ◀askhelpdesk_session=eyJpdiI6IjZPVVlyS2lYTUxEVDY1T3BadGN6Nmc9PSIsInZhbHVlIjoiNWNoVHdxN2ZGRkd5ckZMVnYxVktFOVc2NERNOElYN2IzUCtaMGNrc0JpTk00TUZ2cEhHNkl4d25hK1VkbXZB ▶" ] "Set-Cookie" => array:2 [▶ 0 => "XSRF-TOKEN=eyJpdiI6Ik1zSnhtaEpWN3NLOWtTdy83Tjdpb0E9PSIsInZhbHVlIjoiSVpXMWpoUnl5R01hanQrWEI1UXFNZ25ZSUpFc3d3ZGVtVU9pQ3BrVXBKWHZoQ2NOdThKeUNnenZMZzZlbFNHeTRab2E1TWY3eGZZMTNFSHFKS0QrdmdkZkdBaXBzL0hjNXE5MEZYM3FGZnBKUUFZWDBteklwRFVsZm8wRWpSek8iLCJtYWMiOiIxNGMwMGRjYjIwODhjNWNjMjNmYTkxNzAyOTVhNmE1NjlmNTVjMTU3N2VhMTE4MmRhOGQ2OTc0OTU2YzBmNDExIiwidGFnIjoiIn0%3D; expires=Wed, 18-Jun-2025 00:14:06 GMT; path=/ ◀XSRF-TOKEN=eyJpdiI6Ik1zSnhtaEpWN3NLOWtTdy83Tjdpb0E9PSIsInZhbHVlIjoiSVpXMWpoUnl5R01hanQrWEI1UXFNZ25ZSUpFc3d3ZGVtVU9pQ3BrVXBKWHZoQ2NOdThKeUNnenZMZzZlbFNHeTRab2E1T ▶" 1 => "askhelpdesk_session=eyJpdiI6IjZPVVlyS2lYTUxEVDY1T3BadGN6Nmc9PSIsInZhbHVlIjoiNWNoVHdxN2ZGRkd5ckZMVnYxVktFOVc2NERNOElYN2IzUCtaMGNrc0JpTk00TUZ2cEhHNkl4d25hK1VkbXZBSmNYclR0aE0xKzMwSzFBM0ZOUSt5VlRPZmhidW1qckkrc2djWklLZnArcWN2ZlhPUHhsY0hvWUlGWlRrK0lsb2giLCJtYWMiOiI2YTliYTdmMTgwZDNjMTY4YTk3NmRkYTQwNTAwNWFkNzIyMDJkOGRmYWJmMWY1ZmQwNjg0ZjBiMDYyYzI1ZWZlIiwidGFnIjoiIn0%3D; expires=Wed, 18-Jun-2025 00:14:06 GMT; path=/; httponly ◀askhelpdesk_session=eyJpdiI6IjZPVVlyS2lYTUxEVDY1T3BadGN6Nmc9PSIsInZhbHVlIjoiNWNoVHdxN2ZGRkd5ckZMVnYxVktFOVc2NERNOElYN2IzUCtaMGNrc0JpTk00TUZ2cEhHNkl4d25hK1VkbXZB ▶" ]]

0 of 0

array:4 [▼"_token" => "QOUJDT4XS4icYRFXb0TfPvROOH0TnwYcyE1qQxpS" "_previous" => array:1 [▶ "url" => "https://receivinghelpdesk.com/ask/how-do-i-reset-my-access-master-garage-door-opener" ] "_flash" => array:2 [▶ "old" => [] "new" => [] ] "PHPDEBUGBAR_STACK_DATA" => []]

1 x Application (96.51%)	382.27ms
1 x Booting (3.38%)	13.39ms