- The first thing you will need to do is to disconnect the device from the internet. ...
- The next step is quite simply to just press and hold in the on button for a few seconds. After a few seconds, your Magic Home should switch off. ...
- Unfortunately, you will need to repeat this process four or five times before the device will factory reset for you. ...
- After the fourth of fifth repetition, the bulb will give off a bright strobe to confirm that it has reset. There will be no mistaking this.
- In the final step, all you will need to do is confirm that the LED has indeed strobed. ...
How do I download Magic home pro on a Mac?
Magic Home Pro on the App Store Open the Mac App Store to buy and download apps. Magic Home Pro is a wifi controller APP for smart led lighting. 1. Faster Start without scanning 2.
What is MagicMagic home pro?
Magic Home Pro is a wifi controller APP for smart led lighting. 1. Faster Start without scanning 2. Easier to set light to router 3. Different type of device can be added to same group 4. One device can be added to multi-group 5. Local and remote control can be displayed automatically 6. List shows the light status and color 7. New UI design
Are Your Magic home shortcuts not working anymore?
Oddly, a few Magic Home shortcuts remain unaffected, and continue to work as normal, while others, ironically my favorite/most used Shortcuts just refuse to work anymore, even when I delete and totally rebuild them from scratch. I’ve attempted to rebuild them from the Magic Home app and within the Shortcuts app, but neither work.
How do you connect Magic home lights to a new WIFI?
1:546:04MagicLight WiFi Light Strip Setup Video - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo let's go ahead and create one and then log in now what it wants me to do is open my Wi-FiMoreSo let's go ahead and create one and then log in now what it wants me to do is open my Wi-Fi settings. So I'm going to click on that and in my Wi-Fi settings.
How do I connect my magic home to network?
If this is your first time to configure smart devices through the App, please register your Magic Home Pro cloud account first, Please refer to: How to create a Magic Home App cloud account? Open the App and click the "+" button in the upper right corner, then select "connect device to Wi-Fi network".
How do I reset my wireless LED strip?
Insert a paper clip, or a similar sized object, into the reset hole on the controller (depicted below). Using the paper clip, press and hold the reset button inside the reset hole for eight (8) seconds. If done successfully, the light strip will flash five times then cycle through the colors blue, green and red.
How do I reconnect my magic home led lights?
0:574:39How to Connect a MAGIC HOME LED Strip - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd after that we just change the name of the light toward the sign name. And now we're shaking thatMoreAnd after that we just change the name of the light toward the sign name. And now we're shaking that it works to turn off and turn on the light and change the brightness.
Why are my magic home lights offline?
Please check if there are too many Wi-Fi connections. Please try to restart the router, wait 3 minutes and observe the status of the device. If all of the above are normal, but the device is still offline, Please reset the Smart Device and reconnect it to your Wi-Fi network.
How do I connect my smart device to my WiFi?
General steps:Find your device's wireless settings menu and select "Enable" or "On" to turn WiFi on.Select your network (SSID) from the list, then enter the network key/passphrase when prompted and select "Connect" or "Join."More items...
How do I reset my magic home lamp?
1:302:09How To Factory Reset Your MagicLight Wi-Fi Bulb - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo to factory reset your bulb you're going to want to turn it on and off a total of four times andMoreSo to factory reset your bulb you're going to want to turn it on and off a total of four times and each time you turn it on you want to leave it on for about three seconds so let's count to three two.
How do I factory reset my LED lights?
There is no way to reset it other than unplugging and plugging back in again, usually after a power outage. If you have LED lights that turn on at random times during the day, then this likely needs to be done. Other reasons that you may need to reset your LED strip is if it does not work after being installed.
Where is the reset button on my LED light remote?
3:595:59How to reset Any RGB LED light Remote - YouTubeYouTubeStart of suggested clipEnd of suggested clipHow this one is going to work you just turn the remote control off. And then press the fade or aMoreHow this one is going to work you just turn the remote control off. And then press the fade or a smooth button normally is the one at the far bottom right corner. And you just press that and that.
Why won't my LED light connect to my phone?
Led Light Is Powered Off If the led light is powered off, your phone will not be able to connect to it. This happens because the led light needs power in order to communicate with your phone. So check if the led light is connected to the power source and if it is, make sure the power is turned on.
Why are my LED lights offline?
Smart lights are offline due to technological difficulties. These issues commonly include poor wi-fi signal strength, a power outage, or equipment failures. When smart lights will not come back online, do a factory reset. By doing so, it will allow the lights to reboot and reconnect to a device.
1.8.2 Update broke Shortcuts (Fixed)
This update (v1.8.2) has seemingly broken a number of my Magic Home shortcuts. Oddly, a few Magic Home shortcuts remain unaffected, and continue to work as normal, while others, ironically my favorite/most used Shortcuts just refuse to work anymore, even when I delete and totally rebuild them from scratch.
Developer Response ,
Hello, sorry for the inconvenience. But we want to know what happened. If Siri cannot execute the scene, can you execute it successfully in the APP? If the app still cannot be executed, it may be that the device is currently offline.
It works, but needs improvements
I have 20 fixtures in my setup. There is a learning curve. This one is pretty simple and flexible, HOWEVER, it’s not perfect.
Developer Response ,
Hi, thanks for your feedback! We will record and submit it to the technical team.
Data Not Linked to You
Privacy practices may vary, for example, based on the features you use or your age. Learn More