How do I replace the line in my Yardworks trimmer?
- Grip the cutter knob and turn it counter-clockwise to remove it. Remove any excess yard debris.
- Remove any excess line still wrapped around the previous spool.
- Insert the spring within the replacement spool.
- Pull the replacement line through the slots of the outer hub.
How do you attach a line to a Yardworks Trimmer?
Insert the tip of the trimmer line, and wind in the direction of the arrows. Wrap the line in neat, straight rows, to prevent jams later on. When there are about 5” or 6” of line remaining, snap it into the retainer on the spool to hold it in place. Furthermore, how do I replace the line in my Yardworks trimmer?
How do I change the string on my Yardworks Trimmer?
It's easy to replace your Yardworks trimmer string. Grip the cutter knob and turn it counter-clockwise to remove it. Remove any excess yard debris. Remove any excess line still wrapped around the previous spool. Insert the spring within the replacement spool. Pull the replacement line through the slots of the outer hub. Click to see full answer.
How do I replace the line on my trimmer head?
Removing the spool is the first step in replacing trimmer line in any conventional trimmer head, but trimmer head spools can disassemble in different ways. The trimmer head pictured above and below disassembles by simply unscrewing the knob around its arbor bolt.
How do I replace the line on my lawn mower blade?
Grip the cutter knob and turn it counter-clockwise to remove it. Remove any excess yard debris. Remove any excess line still wrapped around the previous spool. Take the spring off of the inner spool.
How to replace trimmer line in single line?
How to feed extra line to a trimmer?
How does a trimmer retainer work?
How long does it take to reload a double string trimmer?
How many channels does a double line trimmer have?
Is my single line trimmer reloaded?
See more
How do you fill a Yardworks dual trimmer line?
How do I change the trimmer line?
Insert the tip of the trimmer line, and wind in the direction of the arrows. Wrap the line in neat, straight rows, to prevent jams later on. When there are about 5" or 6" of line remaining, snap it into the retainer on the spool to hold it in place.Jan 9, 2022
How do I change the string on my grass trimmer?
How do you install lawn trimmer line?
How do you change a Bosch Easytrim spool?
How do you put string on a Weedeater?
- First, check your string supply. ...
- Choose the right replacement string. ...
- Turn off and unplug your weed eater. ...
- Twist off the head of the spool. ...
- Remove any excess string. ...
- Find the hole where the string is installed. ...
- Snip the string when you stop.
How do you remove the head of a clipper?
How do you change the trimmer line in a shindaiwa string...
I have a Shindaiwa T230 trimmer with a tap and go head. There's a tab on the side of the head. Push that in and then turn the top of the head to your left to get the cover off.
Step 1
Grip the cutter knob and turn it counter-clockwise to remove it. Remove any excess yard debris.
Step 2
Remove any excess line still wrapped around the previous spool. Take the spring off of the inner spool.
Step 3
Insert the spring within the replacement spool. Thread the replacement string through the eyelets of the outer hub. Place the replacement spool within the outer hub.
Step 4
Pull the replacement line through the slots of the outer hub. Reattach the cutter knob by turning it clockwise.
How to replace trimmer line in single line?
1. Remove the Trimmer Head Spool. Removing the spool is the first step in replacing trimmer line in any conventional trimmer head, but trimmer head spools can disassemble in different ways.
How to feed extra line to a trimmer?
First feed the extra trimmer line through the trimmer head eyelet. Make sure to release the line from the retainer before completely securing the spool into position. Replace any knobs, bolts, or other trimmer head pieces removed during disassembly.
How does a trimmer retainer work?
A conventional trimmer head will have a retainer on its spool. Snap the end of the trimmer line into the retainer after it is wound around the spool. The retainer will hold the line in place as the spool is replaced in the trimmer head assembly.
How long does it take to reload a double string trimmer?
Even with the second line to wind, reloading a conventional double string trimmer only takes about five minutes with a little practice.
How many channels does a double line trimmer have?
Insert Trimmer Line and Wind the Line. Double line trimmer heads will have two channels for winding line. Each channel will also have its own starter hole. Because there are two lines, this step will have to be performed for each line. Both lines will wind the same way as indicated on the trimmer head spool.
Is my single line trimmer reloaded?
Your single line trimmer line is now reloaded, and your trimmer should be ready to get back to work. Although there are many steps to reloading line the conventional way, a little practice and familiarity with your trimmer will speed the process up a great deal.
How to replace trimmer line in single line?
1. Remove the Trimmer Head Spool. Removing the spool is the first step in replacing trimmer line in any conventional trimmer head, but trimmer head spools can disassemble in different ways.
How to feed extra line to a trimmer?
First feed the extra trimmer line through the trimmer head eyelet. Make sure to release the line from the retainer before completely securing the spool into position. Replace any knobs, bolts, or other trimmer head pieces removed during disassembly.
How does a trimmer retainer work?
A conventional trimmer head will have a retainer on its spool. Snap the end of the trimmer line into the retainer after it is wound around the spool. The retainer will hold the line in place as the spool is replaced in the trimmer head assembly.
How long does it take to reload a double string trimmer?
Even with the second line to wind, reloading a conventional double string trimmer only takes about five minutes with a little practice.
How many channels does a double line trimmer have?
Insert Trimmer Line and Wind the Line. Double line trimmer heads will have two channels for winding line. Each channel will also have its own starter hole. Because there are two lines, this step will have to be performed for each line. Both lines will wind the same way as indicated on the trimmer head spool.
Is my single line trimmer reloaded?
Your single line trimmer line is now reloaded, and your trimmer should be ready to get back to work. Although there are many steps to reloading line the conventional way, a little practice and familiarity with your trimmer will speed the process up a great deal.
