How do I replace the drain hose on my Maytag washer? To gain access to the drain hose, you'll need to take the front panel off the washer. Using a Phillips screwdriver, remove the two screws located at the bottom of the front panel.
How do you fix a Maytag washer?
· Need help replacing the Drain Hose (Part # WP22003410) in your Maytag Washer? Watch this how-to video with simple, step-by-step instructions for a successful...
Why does my Maytag washer not drain?
VIDEO: How to Install Washer Drain Hose. Table of contents. Installing a Maytag Washer Drain Hose.
How to repair Maytag Neptune washer?
· Remove the hose clamp securing the drain hose to the pump by unscrewing it with a flat-head screwdriver. If the hose has a spring clamp, squeeze the legs of the clamp with a pair of adjustable pliers and move the clamp a few inches down the hose. Place a towel under the pump and pull the hose off the pump's outlet.
How do I Clean my Maytag maxima steam washer?
· Need help replacing the Drain Pump (Part WP6-2022030) in your Maytag Washer? Watch this how to video with simple, step-by-step instructions for a successful ...
How do I remove the drain hose from my washing machine?
0:042:20Whirlpool Washer Repair - How to Replace the Drain Hose ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipThen using a pair of pliers we're simply going to squeeze that spring clamp. And just slide it up onMoreThen using a pair of pliers we're simply going to squeeze that spring clamp. And just slide it up on the hose. Bit. And twist that hoe to pull it off of the pump.
How do you check the drain hose on a Maytag washer?
0:575:31How to UNCLOG Maytag washing machine DRAIN HOSE - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you will shift it out of these little grooves here as well as at the bottom after removing theMoreAnd you will shift it out of these little grooves here as well as at the bottom after removing the Phillips screws about this bottom portion out. And they should just be able to slide right off.
How do you replace a drain hose?
1:404:19How to Change the Drain Hose on a Washing Machine (Zanussi)YouTubeStart of suggested clipEnd of suggested clipFollowing the hose up to the drain pump you can see there is a metal clamp holding it into place. I'MoreFollowing the hose up to the drain pump you can see there is a metal clamp holding it into place. I'm just going to release that so that I can remove the hose from the. Pump. With the hose clamp.
How do you install a drain hose on a washing machine?
Insert the end of the drain hose into the standpipe. Use a tie strap to secure the drain hose in place. If the drain is built into the wall, fasten the drain hose to one of the water inlet hoses with a tie strap. DO NOT install the end of the drain hose higher than 96 inches above the bottom of the washer.
How do you know if your washing machine drain hose is clogged?
An easy way to check that the drain hose is clear is to blow air through it. If nothing is obstructing the drain tube, the problem is most likely at the washing machine pump. If the hose is worn or badly kinked, replacing the hose may improve the ability of the machine to pump water.
Where is the drain pump filter on a Maytag washer?
0:462:10Cleaning the Drain Pump Filter on a Front-Load Washer with no Access ...YouTubeStart of suggested clipEnd of suggested clipNext remove the screws from the bottom of the top panel. Pull the bottom away from the washer slideMoreNext remove the screws from the bottom of the top panel. Pull the bottom away from the washer slide the panel down and set it aside.
Are washer drain hoses Universal?
The drain hose is designed for a universal fit and connects your washing machine drain outlet directly to the drain.
When should I replace washing machine drain hose?
We recommend that you replace your washing machine hoses every 5 years or anytime you notice any of the signs above. Rubber washing machine hoses should be replaced with stainless steel braided hoses. They are much more resistant to bursting and are fairly inexpensive compared to the potential cost of a flood.
Where is the drain hose on a washer?
The drain hose for your washer probably points toward a floor drain or a drain in the wall. Unhook it from the usual spot and point it downward into a bucket. Allow any water inside the washer’s drain hose to drain completely out, if it will come.
How to get water out of a washer?
If the washer is full of water that isn’t draining away, you’ll need to bail it out. Use a bucket, bowls, or tupperware to scoop water out of your washer. Pull out any wet clothes and mop up the bottom with towels. This will make the rest of your repair much cleaner and lighter-weight.
What to do if your washer doesn't leak?
Run a small or even empty load of laundry to see what happens. If the washer doesn’t leak or flood and the basket drains like it’s supposed to, then pat yourself on the back.
Where is the clog on the tub drain hose?
IF the clog isn’t near the pump-side of the drain hose, it might be near the tub-side. Disconnect the other side of the internal drain hose, towel ready to catch any falling water. Then check inside both ends of the drain hose, and the aperture where the drain hose disconnected from. In one of these places, you should find the clogging small article of clothing.
How to unclog a drain pump?
If something is caught in the drain pump, you’ll need to unhook the belt from the drain pulley underneath. Grasp the clogging item with your needle-nose pliers and twist the pulley to unwind the item from the drain assembly. Pull the clogging item out from the top of the pump, where the drain hose was connected.
How to unhook a washer panel?
Look to the top of the panel and unhook it from the top of the washer housing. Then pull away the panel and set it aside, out of your way.
How to stop a non draining washer?
Look for the two water valves in the wall behind or next to your washer and twist them shut. This will shut off the water so that no new water from the wall can add to your non-draining washer mess. The good news is that you don’t have to disconnect the water line hoses.
How to remove drain pump filter from washer?
Open the dispenser drawer by pulling on the handle at the base of the washer. This will reveal the drain pump filter. Remove the drawer by releasing the tab on each side. With your finger, push down on tab on right side of drawer, and up on tab on left side of drawer.
How to drain a black hose?
Release the black hose from the hose clip, remove the plug, and drain the hose into the container. Empty the container. Repeat this procedure if necessary until all the water has drained. Make sure that the black hose is completely dry, replace the plug, and secure the hose in the clip.
How to remove lint from a filter?
Remove large clumps of lint by hand from the filter and place lint in a suitable waste container. Remove remaining residue from the filter by rinsing with water.
