- One way to remove a spinning toilet bolt is to use a pipe wrench. Place the wrench over the bolt and twist it until the bolt loosens.
- Another way to remove a spinning toilet bolt is to use a vise grip. Place the vise grip over the bolt and tighten it until the bolt loosens. ...
- If the bolt is stripped, you will need a drill to remove it. Dig a hole in the middle of the bolt and use a screwdriver to remove it. ...
Full Answer
How to stop toilet bolts from spinning?
How to Stop Toilet Bolts from Spinning? 1 Remove the Anchor Bolt Whether it is rusted or in a good condition, you need to remove the bolts from its place for fixing. ... 2 Check the Hole Now it is the time for checking the hole for the bolts. ... 3 Drill the Hole
How do you remove rusted bolts from a toilet?
The only way to remove rusted toilet bolts and nuts is slicing through the toilet bolt. Once you buy your new toilet, then your toilet bolt replacement is a simple task, just use the nut and bolt kits supplied with the toilet, and you'll have no more toilet bolts spinning.
How to remove a spinning bolt?
How to Remove a Spinning Bolt . From basic toolbox items to the tools of serious handymen, there are a number of methods you can try to remove a bolt that keeps spinning in place. Aim to get the nut out of place, especially if the bolt and nut are spinning together. Once you can pry the nut out of place, the bolt will come loose too. Use a Magnet
How do you get a loose bolt out of a screw?
Aim to get the nut out of place, especially if the bolt and nut are spinning together. Once you can pry the nut out of place, the bolt will come loose too. If you have a magnet handy in your toolbox, you can use it to attract the spinning screw to force it out of place.
How do I stop my toilet bolts from spinning?
0:251:54Toilet bolts that spin! How to stop them even if the toilet is already installed.YouTubeStart of suggested clipEnd of suggested clipYou see I was able to just drive the deck screw down beside. The bolt itself there. And this doesMoreYou see I was able to just drive the deck screw down beside. The bolt itself there. And this does stabilizing it so now it won't rotate. Now that's in theory.
How do you get rusted bolts off a toilet?
0:131:25How To Remove Rusted Toilet Bowl Tank Bolts - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe bottom pull yeah bottom part of the bolt there and then I'll use a wrench I'll use a wrench toMoreThe bottom pull yeah bottom part of the bolt there and then I'll use a wrench I'll use a wrench to get on in there and loosen the bolt.
How do you remove a metal ring from a toilet flange?
0:082:23Bathroom Plumbing : How to Replace a Corroded Toilet Ring - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd removed all the old wax that is around it you're going to take these bolts off these are whatMoreAnd removed all the old wax that is around it you're going to take these bolts off these are what hold your toilet down you want to save those. And your imagine this being a corroded metal ring.
How do you remove a toilet mounting nut without a wrench?
Removing the plastic nut from the toilet tank is easy if you have the right tools and follow these steps:Step 1: Close the water supply line.Step 2: Place a towel under the toilet tank.Step 3: Take the lid off the top of the tank.Step 4: Drain the water from the tank.Step 5: Remove the plastic coupling.More items...•10-Nov-2021
What is The Function of The Toilet Anchor Bolt?
The main function of the toilet anchor bolts is to hold the toilet seat to the ground. These bolts hold the toilet seat to the ground by attaching it to the floor’s toilet flange. These bolts are smaller in size, but they perform a great function.
Why Do My Toilet Bolts Keep Coming Loose?
One of the common issues with toilet anchor bolts is spinning issues. There are several reasons why toilet anchor bolts spin; the most common is rusted bolts. When the bolts are exposed to oxygen and moisture, they become rusted and decaying.
How to Stop Toilet Bolts from Spinning?
Several reasons cause toilet anchor bolts spinning issues. When you notice this issue, the next thing that you need to do is to fix it immediately before it leads to serious damage. If the issue is not fixed immediately, the toilet will not be comfortable for use.
Conclusion
Fixing toilet bolts spinning issue is very easy, and you can do it yourself if you have the essential tools. Fixing this issue yourself will also cost you less than hiring a plumber to fix it for you.
Why do toilet floor bolts spin?
Another common reason for toilet floor bolts spinning is a smaller hole for the anchor bolts. When a plumber installs the toilet seat with the anchor bolts, the hole needs to be in the accurate size. If for any reason, the drilling hole remains small compared to the bolt size, after a few months or years, the bolts will spin.
What happens if you don't fix the bolts on a toilet?
If you don’t fix the bolts initially, it may crack the bolts entirely and may damage the toilet seat as well. You may consider calling a professional plumber to fix it.
How to fix a rusted anchor bolt?
So, here you will have to use the pliers or the adjustable wrench. First of all, place a screwdriver inside the bolt hole to give it a fixed position.
Why does my toilet seat spin?
When the bolts are rusted, it starts decaying the metal. As a result, it can’t hold the weight of the toilet seat and starts spinning inside the hole.
How to clean rust off of bolts?
Use the lubricant spray on the bolts and let it soak for a few minutes. Now use a piece of fabric to clean the rust from the bolts. If there is too much rust, we would suggest using new bolts. To install the new bolts or cleaned old bolts, check the bolts hole again. Make it clean.
What to use to fix spinning bolts?
Things you need to fix spinning bolts –. Spray lubricant. Adjustable pliers. Rubber gloves. Toilet bolts, nuts, and washers. Plastic cap and cap holder. Steps to Follow. Before you get into the whole procedure, wear the rubber gloves on hand for safety and avoiding too much mess. Then follow the following steps.
Where are the anchor bolts on a toilet?
Toilet anchor bolts are located in the ground that keeps holding the toilet seat in place by connecting it with the flange and the floor. Depending on the type of toilet seat, the bolts sizing may vary. The anchor bolt is often carriage bolts.
How to get a spinning screw out of place?
Use a Magnet. If you have a magnet handy in your toolbox, you can use it to attract the spinning screw to force it out of place. This is probably the simplest trick you can try before you bring out the big guns.
How to get a nut out of a bolt?
Use a Flat Screw Driver. Push the flat end of the screwdriver under the nut and try and release the nut out of its place. If you can manage to get the nut out, you can repeat this process with the bolt.
What to do if a bolt doesn't work?
If it doesn’t work, try a 12-point wrench to force the bolt out. Apart from a wrench, a vice grip is also a tool that you can use to try and pry the spinning nut and bolt out. Another way is to use a pair of pliers or some other mechanism to hold the head of the bolt while you screw the nut out of place.
What to use to cut bolt head off?
An angle grinder cutter should ideally be your last resort. It can be used to cut the bolt head off if the nut and bolt keep spinning together. Grind the nut and bolt until you’ve completely grinded through the nut and you can easily pull the bolt out. Grinders can be a bit tricky and dangerous to use, so just make sure that you stay in control ...
How to stop a nut from spinning?
If the spinning is driving you crazy, you need to stop worrying about protecting the nut and bolt. Use a drill bit and drill straight through the bolt. Alternatively, you can apply a bit of glue on top of the nut, and while it’s still liquid, stick the top of the drill bit on it. Once it’s dry, try pulling the nut out.
Can You Remove a Bolt That Keeps Spinning Without Cutting It?
One question that many people have is whether or not removing a bolt that keeps spinning is possible without cutting or breaking the bolt. The answer here is that it is technically possible to remove a bolt that keeps spinning without cutting it. That said, it really depends on the situation and how stuck onto the bolt the nut is.
9 Ways to Remove a Bolt That Keeps Spinning
As far as we can tell, there are nine different ways to remove a bolt that keeps spinning. First, we will attempt to loosen the nut on the bolt. If that’s not possible, we will remove the nut from the bolt. If that is not possible, then we will have to break the bolt.
What Is the Best Way to Remove a Spinning Bolt?
Personally, we would recommend adding some lubrication to the mix, some penetrating fluid, and then using a good breaker bar along with a good secondary socket wrench. However, if simply loosening the nut is not an option, then the next viable option is to break the nut, and if that doesn’t work, the last resort is to cut the bolt.
Summary
As you can see, there are plenty of ways to remove bolts that keep spinning. Which method you use really depends on the items and tools that you have at your disposal.
