How do I remove the head from my Troy Bilt tb32ec?
- Put on leather gloves and safety glasses.
- Insert the straight end of the locking rod into the locking rod slot underneath the trimmer head.
- Grasp the trimmer head with your other hand and turn it clockwise to unscrew it and lift it off the trimmer shaft.
Full Answer
How do I replace the head on my Troy-Bilt Trimmer?
Push down on the bump knob while screwing it in place to ensure it threads properly onto the shaft. To replace the entire trimmer head on your Troy-Bilt trimmer, start by looking for a hole in the shaft and/or on the spindle just above the shaft. If needed, rotate the trimmer head to align a second inner hole with the outer hole.
How do you remove the head from a trimmer head?
If needed, rotate the trimmer head to align a second inner hole with the outer hole. Then, insert a hex key or small screwdriver through these holes to lock the trimmer head in place. This will allow the cutting head to unscrew from the shaft instead of spinning freely.
How do you change the head on a Craftsman power Trimmer?
Pull the engine spark plug wire from the spark plug by hand to prevent accidental engine starting when removing and replacing the trimmer head. Loosen the two trimmer head retaining bolts with a socket wrench, spreading the trimmer head open enough to clear the spindle head and spindle head stops.
How do you take the head off a Troy Bilt trimmer tb32ec?
0:491:58Replacing the Cutting Head (Troy-Bilt Part # 753-08182) - YouTubeYouTubeStart of suggested clipEnd of suggested clipRun it counterclockwise to remove it. Now install the new trimmer head and again remember it is aMoreRun it counterclockwise to remove it. Now install the new trimmer head and again remember it is a reverse thread. I'll lock the spindle in place and tighten up the head.
How do you remove a Troy Bilt head?
Look for tabs on the side of the larger circle and if you find them, push on the top tab with your thumb and depress the bottom tab with a flat-head screwdriver to release it. Repeat on all tabs until the large circle comes free and then push two additional tabs on the knob head.Dec 3, 2021
How do you change the head on a Troy Bilt trimmer?
1:576:13Troy Bilt string trimmer improvements - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhen you line it up there's arrows. When you line these arrows up with the holes here you actuallyMoreWhen you line it up there's arrows. When you line these arrows up with the holes here you actually feed the line right into the head and then you simply crank.
How do you remove a trimmer head?
0:303:58How to Replace a String Trimmer Head - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you can you just you see here I've just got a little screwdriver you can use a nail or some giveMoreAnd you can you just you see here I've just got a little screwdriver you can use a nail or some give me something to put down in that hole. But once you put down in the hole you have to turn the head.
How do you change grass trimmer heads?
1:533:06How to Change a String Trimmer, Weed Eater, Weed Whacker HeadYouTubeStart of suggested clipEnd of suggested clipOff. Here's a speed feed heads not brand new but I'm going to put this on. So I still got theMoreOff. Here's a speed feed heads not brand new but I'm going to put this on. So I still got the screwdriver. Or the nail whatever using down that same hole. And then obviously turn it the opposite way
How do you restring a Troy Bilt tb685ec?
0:101:20Digital Video Project – Troy-Bilt String Trimmer Installation - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst cut about 20 feet of 0.0 95 inch round replacement line then turn the knob on the trimmer headMoreFirst cut about 20 feet of 0.0 95 inch round replacement line then turn the knob on the trimmer head until the arrows on the knob. And the outer reel all point in the same direction push.
Who makes Troy Bilt trimmers?
MTDCraftsman's gasoline-powered string trimmers are based on those of manufacturer MTD, which makes Troy-Bilt and other brands.Oct 14, 2011
How do you take the head off a FSA 56?
0:001:31Replacing AutoCut® 2-2 Trimmer Line on FSA 56 - YouTubeYouTubeStart of suggested clipEnd of suggested clipNext depress these two chaps on the melon head and the cap and spool will release. You can nowMoreNext depress these two chaps on the melon head and the cap and spool will release. You can now remove the old.
What is a fixed line trimmer head?
Fixed head systems use individual lengths of line that are loaded or threaded into the trimmer one at a time as needed. This avoids some of the hassles of winding line onto trimmer heads and makes the overall process of dealing with trimmer line less cumbersome.
How do you remove the head of a Toro trimmer?
Once you have the Toro in your hands, you will see that the process is straightforward. Hold the base of the trimmer with one hand and twist the cap off counterclockwise. Holding the base of the trimmer will keep the cap from spinning on the shaft when you try to remove it.Jul 17, 2017
Which way do Troy Bilt trimmers unscrew?
Advertisement. Note that some Troy-Bilt string trimmer heads have reverse threads; they unscrew clockwise instead of counterclockwise, so try both directions if you don't seem to make headway.
What is a Troy Bilt trimmer?
Troy-Bilt offers multiple trimmer heads for its line of string trimmers, including the SpeedLock trimmer head. Also called cutting heads or bump heads, these parts tend to crack or wear out, even with normal use. Troy-Bilt trimmer heads are designed for easy, user-friendly removal and installation. In some cases, the only tools you might need are ...
How to attach Speedlock trimmer head?
If you want to attach the SpeedLock trimmer head, you only need to remove the bottom half of the current trimmer head. You can leave the upper portion of the cutting head on the shaft. Notice that the bottom of the head consists of two circles: a larger circle with a smaller circular knob (the "bump knob") in the center.
Why do you need to wear eye protection when disassembling a trimmer?
Because the head contains a spring that's under pressure, wear eye protection when disassembling the trim head. Never work on the trimmer while its engine is running. Disconnect the trimmer attachment from the engine to avoid any mishaps should the trimmer turn on unexpectedly. Advertisement. references.
How to get a large circle out of a knob?
Look for tabs on the side of the larger circle and if you find them, push on the top tab with your thumb and depress the bottom tab with a flat-head screwdriver to release it. Repeat on all tabs until the large circle comes free and then push two additional tabs on the knob head.
Where is the head of a Troy Bilt lawn trimmer?
The trimmer head, located at the bottom end of the trimmer body , holds and spins the trimmer string that cuts weeds. Trimmer heads can break, particularly if you repeatedly bang the head against a hard surface to get ...
How to stop a trimmer engine?
Stop the trimmer engine, turn the trimmer engine ignition switch to the off position and remove the key. Pull the engine spark plug wire from the spark plug by hand to prevent accidental engine starting when removing and replacing the trimmer head.
Where are the retaining bolts on a trimmer head?
The retaining bolts are located on each side of the trimmer head, opposite where the trimmer head string protrudes from the trimmer head.
Can a trimmer head break?
Trimmer heads can break, particularly if you repeatedly bang the head against a hard surface to get the head to release new string. Fortunately, the trimmer head is a serviceable and replaceable part that you can fix yourself.
Can you loosen trimmer bolts?
Loosen the trimmer retaining bolts only, but do not loosen or remove the trimmer head retaining bolt nuts. Writer Bio. A former cake decorator and competitive horticulturist, Amelia Allonsy is most at home in the kitchen or with her hands in the dirt. She received her Bachelor's degree from West Virginia University.