How do I remove Holloway House Quick Shine?
- In a bucket, dilute the Deep Cleaner in HOT water as HOT water is more effective.
- Using a sponge mop or our Hardwood Floor Mop, apply to the floor surface.
- Allow the Deep Cleaner solution to remain on the floor for a few minutes.
How do you use quick shine deep cleaner?
Quick Shine Deep Cleaner was specifically developed to remove Quick Shine Floor Finish and imperfections such as trapped pet hair, dust, scuffing and ground-in dirt without harming hardwood floors or their polyurethane seal or any other type of floor surface. Dilute the Deep Cleaner in hot water and apply it to the floor.
How do you clean over-splash after hardwood luster?
Spray it on the area, let it sit for a minute or so then wipe it up with a damp cloth or sponge. This method also works for customers who might have any over-splash on the bottom of their walls or appliances when applying the Floor Finish or Hardwood Luster on their floors.
Can you use quick shine floor cleaner on wood floors?
If you are looking for a floor cleaner, you can use our Quick Shine® Floor Cleaner or Quick Shine® Hardwood Floor Cleaner as a regular cleaning agent. If you are looking to give your floors a shine or to revive your hardwoods, you can use our Quick Shine® Floor Finish or Quick Shine® Hardwood Floor Luster to give your floors that WOW factor.
Does Quick Shine wear off?
Quick Shine is not a wax; it's a polymer finish which means you never have to strip it off the floor. You literally walk it off. If you have lots of traffic in the house you might want to reapply every few weeks, but if it's just you in the house, the finish will last for months.
How do you get the shine off hardwood floors?
Sand the gloss by hand using 240-grit sandpaper. Sand it very lightly, buffing it in quick, small strokes. Sand it just enough to take off the shine of the gloss so the next coat will stick. Vacuum up the dust.
How do you remove polymer floor finish?
1:193:04Basic Coatings Acrylic Polish Removal Process - YouTubeYouTubeStart of suggested clipEnd of suggested clipSolution manual agitation with a non abrasive scrubbing pad may be needed for heavy polish buildup.MoreSolution manual agitation with a non abrasive scrubbing pad may be needed for heavy polish buildup. Repeat this process in small areas until all polish has been removed before moving on to the next.
How do you remove polish from laminate flooring?
Cleaning laminate floors with vinegar helps to remove the wax residue without harming the floor's finish. Mix a solution of 2 cups vinegar per gallon of hot water, dip a cloth in the solution, wring it well and rub along the planks in one direction only, not back and forth.
Does Quick Shine ruin hardwood floors?
We often receive calls from customers asking if our Finish and Cleaners are compatible with certain floor types. The answer is YES! You can use our Quick Shine® Multi-Surface Floor Finish and Cleaner on a variety of sealed hard surface flooring, including; hardwood, laminate, tile, vinyl, linoleum, stone and more!
How do you remove gloss from a floor?
1:142:11How to Remove Bona Floor Polish - YouTubeYouTubeStart of suggested clipEnd of suggested clipThen put a damp cleaning pad on the bottom of your mop. And clean up the residue from this sectionMoreThen put a damp cleaning pad on the bottom of your mop. And clean up the residue from this section rinsing or changing the pad is necessary.
How do you remove Rejuvenate floor shine?
Combine 1 cup white vinegar with 1 gallon warm water in a bucket. The solution can be used on wood floors or vinyl. The acidic vinegar will cut through the chemicals in the Rejuvenate and lift it from the surfaces.
Does vinegar remove floor polish?
Since vinegar is an acid, it will actually break down the finish on the surface of your floor, and over time it will reduce the shine, and leave a dull appearance.
How do you remove polish from vinyl flooring?
0:100:56Removing Buildup on Vinyl Flooring - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll you need is a spray bottle you're gonna mix equal parts water ammonia. And simple dishwashingMoreAll you need is a spray bottle you're gonna mix equal parts water ammonia. And simple dishwashing detergent spray it on let it sit for a few minutes rub.
Can you use vinegar on laminate floors?
Yes, it is safe to clean most laminate floors with a solution of vinegar and water, which is yet another reason to love vinegar! Mix 1 cup household vinegar with 1 gallon warm water. Use a slightly damp mop. Do not overwet the floor — water is laminate floors' enemy, as it can cause water spots or even warping.
How do you remove rejuvenate from laminate flooring?
Fill your bucket with one gallon of warm water and ½ cup of white vinegar. Use a mop to thoroughly scrub the affected area, making sure to apply pressure. Rinse the floor by mopping again with just water.
How do you remove haze from laminate floors?
If there is a light haze on the face of your laminate, use a vinegar and water mixture to mop it clean. A 50/50 solution will remove most hazes, on laminate as well as on tile and natural stone, that are a result of improper cleaning after the installation.
Product Description
Holloway House® Protection & Shine Quick Shine® Floor Finish. Quality floor care since 1962. 50 years! Design for the environment U.S. EPA. It's like a new floor in a Bottle®. Hardwood, laminate, tile, vinyl & stone. Restore your floor with a deep, rich, protective glow. Environmentally friendly.
Important information
Warning: eye irritant. Read back label carefully.Caution: eye irritant.Avoid contact with eyes. In case of eye contact, flush with water thoroughly and call a doctor. Do not take internally.Keep out of reach of children.
What other items do customers buy after viewing this item?
Disclaimer: While we work to ensure that product information is correct, on occasion manufacturers may alter their ingredient lists. Actual product packaging and materials may contain more and/or different information than that shown on our Web site.
