How do I refill my Aspire breeze vape?
- Pop off the mouthpiece with a fingernail and use the underside of the mouthpiece as a tool to unscrew the chimney.
- Thread the coil head to the bottom of the chimney, then fill the tank with juice until it reaches the fill mark line.
- Insert the chimney/coil head back into the device and screw it in.
How to use the breeze vape?
Fill the Breeze from the top, pull off the drip tip section, unscrew and remove the cartridge, you can add your preferred e-juice into the tank. Be aware of the max fill line when filling the breeze. The Breeze employs U-tech coil to ensure a flavorful vape (Breeze U-tech coils are not interchangeable with Nautilus X U-tech coils.)
How do I Clean my aspire vape tank?
If you need a bit of extra cleaning power, you can use a paper towel or flexible pipe cleaner. Blot away excess water with a paper towel and reassemble the tank. You can also clean the atomizer coils for your Aspire tank by swishing them in warm water or vodka. Cleaning a coil removes some of the crust and can prolong the coil’s life.
How do you use aspire Breeze automatic on/off?
Aspire Breeze Automatic On/Off In addition to its simplicity and good looking in design, the Breeze is also super easy to use, just inhale from the drip tip without pressing the fire button, the breeze will work for you. Make sure the Breeze has been filled with e-juice before taking a inhale.
How do I replace the coil on my aspire Revvo atomizer?
Twist the atomizer coil out of the base and twist in a new coil. Prime the coil with a bit of e-liquid before using it for the first time. The Aspire Revvo tank has a unique design and an unusual method for replacing coils. To get started, twist off the tank’s top hardware. You’ll see the cone-shaped retaining nut that holds the coil in place.
How do you fill an Aspire Breeze 2 tank?
7:1110:38How to replace the coil and fill the tank on the Aspire Breeze 2. - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you're gonna pop as you you got a flipped over you still put it back in you're gonna pop this topMoreSo you're gonna pop as you you got a flipped over you still put it back in you're gonna pop this top off. And just fill it right up BAM.
How do I load my Aspire vape?
0:132:52How to fill an aspire tank - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou take a couple of drops take the top off the bottle you're going to take a couple of drops. AndMoreYou take a couple of drops take the top off the bottle you're going to take a couple of drops. And drop two drops into the reservoir so that's going to sit there for a minute. And steep.
How do I refill my Aspire k2 vape?
0:201:26How to use your Aspire K2 Kit - YouTubeYouTubeStart of suggested clipEnd of suggested clipSimply unscrew it from its housing and screw a new one in a finger tight. To fill up the tank simplyMoreSimply unscrew it from its housing and screw a new one in a finger tight. To fill up the tank simply insert the juice bottle done one of the sides. And squeeze.
How do I change the settings on my Aspire vape?
3:025:28Aspire Rover X30 Starter Kit - Overview & User Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipPress the plus button and five Dainius li to change the annex 32 voltage mode as shown by a V in theMorePress the plus button and five Dainius li to change the annex 32 voltage mode as shown by a V in the left corner of the display. This will simply send the desired volts to the tank.
How to replace coil on Aspire atomizer?
In most Aspire tanks, the atomizer coil is connected to the tank’s bottom hardware. To replace the coil, twist the bottom hardware to remove it from the tank. Twist the atomizer coil out of the base and twist in a new coil. Prime the coil with a bit of e-liquid before using it for the first time.
How to clean coils on Aspire tank?
You can also clean the atomizer coils for your Aspire tank by swishing them in warm water or vodka. Cleaning a coil removes some of the crust and can prolong the coil’s life. It will not, however, fully restore the coil’s original flavor. After cleaning an atomizer coil, allow it to dry for about 24 hours.
How to get a good mouth to lung vape experience?
By replacing the mouthpiece and adjusting the airflow collar, you can get a good mouth-to-lung vaping experience with almost any tank. Don’t forget that reducing the tank’s airflow will cause the coil to run hotter. You may need to lower your device’s wattage setting to compensate.
What to do if your Aspire tank leaks?
The first thing that you should do is disassemble and reassemble your tank.
What is the wattage of an Aspire coil?
Wattage Range. On the side of most Aspire atomizer coils, you’ll see a set of numbers – such as "40-60W” – indicating the coil’s suggested wattage range. Although the range is only a suggestion, you’ll generally have the best experience if you set your device’s power within that range.
Why does my Aspire tank gurgle?
If your Aspire tank is gurgling and spitting, the most likely reason is that your device’s wattage setting is too low. As a result, the air pressure from your puffs is drawing more e-liquid toward the coil than the coil can vaporize. The excess e-liquid pools and spits out through the mouthpiece.
How to replace glass in Aspire Triton?
To replace the glass, disassemble your tank and remove any glass fragments with tweezers. Push gently to get the replacement glass sleeve into position and reassemble the tank. Note that in the Aspire Triton, the glass is a permanent part of the upper hardware.
