How do I program my Xfinity xr5 remote?
- Press and hold SETUP until the LED turns GREEN.
- Press the Xfinity button.
- Follow the on-screen instructions to enter the 3-digit code that appears.
- The remote is now paired and the cable box should now respond to any keypress, even when hidden in a cabinet.
How do you set up a Xfinity remote?
Troubleshooting Common Problems
- Make sure you have an active Internet connection.
- Make sure the TV Box you are trying to tune is turned on and compatible with the Xfinity TV Remote app for TV control.
- Learn more about the Xfinity TV Remote app with these tips.
Where is the setup button on Xfinity remote?
- Voice remotes: XR11, XR15, XR16
- XR2, XR5
- Silver with red or gray OK-select button
How to set up a Xfinity remote?
There are several ways you can tune to a TV show using the Xfinity TV Remote app:
- In TV Listings, tap Watch on TV to tune your TV to the selected program in TV Listings.
- In TV Listings, tap Watch Channel or the channel number/logo to tune directly to that channel.
- In TV Listings, tap Filter in the upper right-hand side of the grid. ...
- In Xfinity On Demand, select Watch XOD to tune your TV to the On Demand program information screen. ...
How to sync Xfinity remote to TV?
Without a button for setup and without number buttons then:
- The TV box and your receiver should be on.
- Remove the pull tab which you will find at the back of the remote to activate it.
- Press the Voice button on the remote when aiming the remote at the receiver.
- To finish the setup, follow the directions on your TV’s screen.
- The Microphone button will appear when you choose the Voice option. ...
How do I setup my Xfinity XR5 remote?
RF Pairing Method A:Put STB or adapter to enter pairing mode (refer to RF PAIRING instructions supplied with STB or adapter).Press and hold the SETUP key on the remote until the LED blinks twice.Press the MENU key on the remote and the remote will begin blinking as it attempts to pair.More items...
How do I reset my Xfinity XR5 remote?
Factory Reset the Xfinity Voice Remote without a Setup Button (XR15)Press and hold the A (triangle) and D (diamond) buttons at the same time for three seconds until the status light changes from red to green.Press 9-8-1.The LED will blink blue three times to indicate that the remote was reset.
How do I sync my Xfinity remote to my TV?
If it has a Setup button:Turn on your TV.Press and hold Setup until the light at the top of the remote changes from red to green.Enter 9-9-1. The light should flash green twice.Keep pressing CH ^ until the TV turns off.Once the TV turns off, press Setup to lock in the code.Press the TV power button on the remote.
How do I program my Comcast remote without a code?
4:535:42How to Program Your Xfinity Remote Without the Code - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt looks for it tests. Another code when your TV turns off stop pressing this button.MoreIt looks for it tests. Another code when your TV turns off stop pressing this button.
How do I pair my XR16 remote?
Pair the XR16 Flex Remote to a TV Go to the Remote Settings menu. Press and hold the Voice (Microphone) button and say “Remote settings.” Choose “Voice remote pairing.” Follow the instructions on the TV to select your TV and audio devices.
Whats the Setup button on Xfinity remote?
There is no setup button on voice-controlled Xfinity remotes. The XR15 and XR16 remotes use vocal commands to change channels or access the content you want. To get your XR15 or XR16 to work with your TV or streaming box, you'll need to pair the remote with it.Sep 15, 2021
How do I program my Comcast remote to my soundbar?
Programming an Xfinity X1 Remote to Your SoundbarMake the Soundbar the Receiver Output. ... Press the Setup Button on Your Xfinity X1 Remote. ... Wait Until the LED Light at the Top Turns Green. ... Enter the Soundbar's Manufacturer Code. ... Wait for the Led Light to Flash Twice (in Green) ... Test the Remote.
What are the codes for Xfinity remote?
Want to program your Xfinity remote control? Here's how!LG 10178, 11265.Panasonic 10051, 10250.Samsung 10812, 10060.Sanyo 10154, 10159.Sony 10000, 11100.Sharp 10093, 10165.Toshiba 10156, 11156.Vizio 11758, 11756.More items...
How do I pair my xr15 remote to my soundbar?
Follow the instructions to pair your Remote for Voice Control. Be sure to point the remote at your equipment during setup. Press and hold Xfinity and Info (i) buttons together for 5 seconds until the LED turns GREEN. Follow the TV on-screen instructions to enter the 3-digit code that appears.
How do you reset an Xfinity remote?
Factory Reset the Xfinity Remote with a Setup ButtonPress and hold the Setup button. In about 5 seconds, the color of the LED on the remote will turn green from red.Press 9-8-1. You will see that the LED will blink twice in green color. Now, your remote has been reset.Mar 14, 2022
How to remove aim anywhere from Xfinity remote?
If you would like to use your remote to control multiple Xfinity set-top boxes simultaneously, you can remove Aim Anywhere pairing by following the steps below: Step 1: Press and hold the "Setup" button on the remote until the status LED changes from red to green. Step 2: Press "A" on the remote. If the status LED blinks green twice, you have ...
How to find the TV code on my AVR?
If you can't find a working code for your TV and/or AVR, follow the steps below: Step 1: Turn on your TV and AVR. Step 2: Press and hold the "Setup" button on your remote until the status LED changes from red to green. Step 3: To search for a TV code, enter 9 9 1 on the remote. To search for an AVR code, enter 9 9 2.
Can Xfinity remote be used with Aim Anywhere?
Your Xfinity remote can be paired with Aim Anywhere devices, including select set-top boxes, allowing you to control your devices even when they are placed out of line-of-sight (up to 50 feet away).
How to reset XR16 voice remote?
If you’re still having issues (XR16 Voice Remote for Flex without number buttons), perform a factory reset: Simultaneously press and hold the Info (i) button and the Home button (house icon) until the status light on the remote blinks.
How to program a voice remote to a TV?
Programming Your Voice Remote to Control Your TV or Audio Device. Press and hold the Microphone (Voice) button and say, "Program remote.". You can also get there by navigating to the Settings page, selecting Remote Settings and then Voice remote pairing.
How to set up a remote to a TV?
Make sure your TV and TV Box are on. Activate the remote by removing the pull tab on the back. Aim the remote at the TV Box and press the Microphone (Voice) button. Follow the on-screen instructions that come up on your TV to finish setup.
What to do if your remote doesn't work?
If you cannot adjust the volume with your remote, select It Doesn’t Work , and repeat the process again. Once your Voice Remote is paired, follow the on-screen instructions to set up power, volume and input control for your TV and audio equipment.
How to pair Xfinity remote to Xfinity box?
Here's how: Press and hold the Xfinity and Info (the lowercase i button to the right of the microphone button) buttons at the same time for about five seconds.
How to find the code on a remote?
To control audio or some other type of component, select Audio/Other, select the manufacturer, and then find the code (s) in the second section.
What happens if you don't accept Xfinity code?
If the code is accepted, the light at the top will flash green twice. If this happens, you can start controlling your TV or component with your Xfinity remote. If the code is not accepted, the light will flash red. If the Xfinity website provided multiple codes, try those.
Can you use Xfinity remote to control soundbar?
Depending on your remote model, you may also be able to use it to control other components like soundbars and DVD players. Steps.
