How do I program my orbit sprinkler timer model 57894?
- Turn the dial to "Cycle Start Times."
- Press the "+" or "-" to set the start time.
- Press "Enter" to confirm the start time.
- Press "Next" to set the start time for each additional program, following the same procedure.
Full Answer
How to program an orbit sprinkler timer?
Twist the dial to "Auto" to program a rain delay into the Orbit timer. Push the "Rain Delay" button (located on the lower-left corner) to prevent the system from watering for a day. Push the "Rain Delay" button again to prolong watering for two days and again for three days. Push "Enter" to save the delay settings.
How to turn on orbit sprinkler system manually?
- Turn the dial to the MANUAL position.
- Station run time will flash in the display. Use the button to move to the desired station.
- Turn the dial to the RUN position to run the station (only the designated station will water, then controller will return to automatic mode with no change in the previously ...
How to install an orbit sprinkler?
How To Install And Program An Orbit Easy Set Sprinkler Timer – Youtube – Orbit Sprinkler Wiring Diagram. You can usually depend on Wiring Diagram as an crucial reference that may help you preserve time and cash. Using the help of this book, you can easily do your personal wiring tasks.
How to hardwire an orbit sprinkler timer?
Step-by-Step Guide to Harwide An Orbit Sprinkler Timer
- Pick Your Spot and Check the Power. The very first step is to pick out your location. ...
- Scope Out the Packaging. You should have already purchased your sprinkler timer; now is the time to unbox it. ...
- Removing the Face. Next, it is time to take the face of the timer off. ...
- Drilling Extra Mounting Holes. ...
- Cut the Power. ...
- Mounting the Cabinet. ...
- Mount and Re-Mount. ...
How do you set the orbit model 57894?
0:496:41How to Program an Orbit Easy Set Logic Timer - YouTubeYouTubeStart of suggested clipEnd of suggested clipAfter you've got the year you'll set them on. Press the right arrow again and then you'll set theMoreAfter you've got the year you'll set them on. Press the right arrow again and then you'll set the date. After you've got the date set up turn the dial to start time to enter your start.
How do you program an orbit sprinkler system?
2:154:56How to Program an Orbit Easy Dial Timer - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo do this press the plus or minus buttons until you reach the desired number of watering minutesMoreTo do this press the plus or minus buttons until you reach the desired number of watering minutes each station on your easy dial timer can be programmed to water from 1 up to 240.
How do I reset my orbit sprinkler controller?
Reset to Factory Default – Orbit Irrigation B-hyve Help. To reset your timer back to factory settings: Turn the timer to the OFF position by rotating the dial. Open the front panel and press the reset button for 10 seconds.
How do I set my orbit sprinkler timer to manual?
0:282:41Manual Running on Orbit Sprinkler Timer - YouTubeYouTubeStart of suggested clipEnd of suggested clipRight now in addition to whatever else is scheduled to run so the way that I would do that is IMoreRight now in addition to whatever else is scheduled to run so the way that I would do that is I would there's this inter manual button down here I would hit the pit that button.
How do I program my orbit faucet timer?
0:097:21How To Program An Orbit 2-Outlet Hose Faucet Timer (24713)YouTubeStart of suggested clipEnd of suggested clipYou'll need to set the current time. Turn the dial to set o'clock. Use the plus and minus buttons toMoreYou'll need to set the current time. Turn the dial to set o'clock. Use the plus and minus buttons to select the current time of day. Hold down the buttons to scroll more quickly to the desired. Time.
How do you set a water timer?
0:042:27How to Set Up an Electronic Water Timer - YouTubeYouTubeStart of suggested clipEnd of suggested clipStart by rotating the dial to set o'clock and pushing the plus or minus button to set the time. HoldMoreStart by rotating the dial to set o'clock and pushing the plus or minus button to set the time. Hold to advance. Quickly. Next rotate the dial to start time and choose when you want your watering to.
Why does my sprinkler timer not work?
If your sprinklers aren't working but the timer is on, the problem could be a fuse. (Not all timers have fuses, but some older ones do.) Open the sprinkler timer box to check the fuses; if any are broken, replace them. The problem could also be the sprinkler system's antenna, which is often powered by a 9-volt battery.Jul 21, 2017
How do you test an orbit sprinkler controller?
Turn the dial to the "Auto" position and move the slide switch for the desired valve up to the "Manual On" position to test valves on Orbit's "Individual Station Slide" timers. To test all the valves in sequence, simply press the "Manual" key and press "Enter."
Why isn't my orbit sprinkler timer working?
Check the connection to the docking port to ensure the timer is plugged in properly. Try removing the timer and reinserting it into the docking port, pushing down until you hear a click. If you are still not getting power, the timer may be defective.
How do I program my orbit 4 outlet timer?
0:327:56How to Program an Orbit 4 Outlet Hose Faucet Timer (56545)YouTubeStart of suggested clipEnd of suggested clipUse the plus and minus buttons to select the current time of day. Hold down the buttons to scrollMoreUse the plus and minus buttons to select the current time of day. Hold down the buttons to scroll more quickly to the desired time. Pay particular attention to the a.m. and p.m..
Orbit 57894 Irrigation Controllers download instruction manual pdf
Orbit 57894 4 Station Easy Set Logic Indoor Outdoor Sprinkler Timer 57894202314176 download pdf instruction manual and user guide
Step 1
Push the "Reset" button (located in the bottom-right corner) to clear all previously programmed data if you're programming the Orbit sprinkler timer for the first time.
Step 2
Twist the dial to "Time/Date" to set the date. "12:00 PM" appears on the display (located at the top of the Orbit face) with arrows pointing to the day, month and year. Use the "Up" and "Down" buttons (located to the right of the display) to adjust the current time, and push "Enter" (located below the Up and Down buttons).
Step 3
Twist the dial to "Start Times (A)" to adjust the watering schedule for program A. The display shows an "A" and a flashing cursor beside "Cycle Start Time 1." Use the Up and Down buttons to set the time you desire and push "Enter." Continue to set up to three more start times.
Step 4
Twist the dial to the "Station Duraton (A)" to set the watering duration for program A. The display shows an "A" and "Mins." Push the "Next" button (located to the left of the dial). Hold the Up or Down button until the watering duration you desire is displayed. Push "Next" and continue to set water duration times for each start time.
Step 5
Twist the dial to "Days of the Week (A)" to specify watering days. An "A" appears on the display and the cursor blinks below the days of the week. Push "Enter" to activate a watering day. An arrow appears under the specified day and the cursor moves to the next day of the week. Push "Next" to skip a watering day until all days are programmed.
Step 6
Twist the dial to "Auto" to program a rain delay into the Orbit timer. Push the "Rain Delay" button (located on the lower-left corner) to prevent the system from watering for a day. Push the "Rain Delay" button again to prolong watering for two days and again for three days. Push "Enter" to save the delay settings.