Receiving Helpdesk

how do i program my dico thermostat

by Mrs. Emmy Heathcote Jr. Published 3 years ago Updated 2 years ago

  1. Change your Dico thermostat to program mode by pressing the button that says, “PROGRAM/MODE” or “MODE,” depending on your Dico thermostat.
  2. Use the up and down buttons to set the waking time and temperature, time first and then temperature.
  3. Set your daytime temperature. This is the temperature your house will maintain from two hours after you wake up until the evening.
  4. Set the time and temperature for your desired evening and night settings, as you did for morning and daytime.

How to Program a Dico Thermostat
  1. Change your Dico thermostat to program mode by pressing the button that says, “PROGRAM/MODE” or “MODE,” depending on your Dico thermostat.
  2. Use the up and down buttons to set the waking time and temperature, time first and then temperature. ...
  3. Set your daytime temperature.

Full Answer

How do I program my Dico thermostat to save money?

Programming the device properly helps you save money on heating bills, as you can set it to produce just the amount of heating or cooling you need throughout the day. Change your Dico thermostat to program mode by pressing the button that says, “PROGRAM/MODE” or “MODE,” depending on your Dico thermostat.

How do I program my thermostat when I'm away from home?

When you’re away from home, program the thermostat five degrees lower than your normal temperature. Set your programmable thermostat to bring the temperature back to 68 degrees 30 minutes before you arrive at home.

What temperature should I Set my Dico thermostat to?

Your ideal house temperature will vary, depending up on the local climate. If your Dico thermostat allows for daily settings, adjust your waking and night temperature schedule for the weekends. Setting your thermostat to lower than 62 degrees in the winter can cause your pipes to freeze and burst.

How do I set the temperature on my thermostat?

Use the up and down buttons to set the waking time and temperature, time first and then temperature. The ideal waking temperature is between 70 and 78 degrees Fahrenheit, according to ENERGY STAR. Set your daytime temperature.

How do I reset the program on my thermostat?

Reset the Thermostat Common methods for resetting a thermostat include installing the battery backward for five seconds, pushing a recessed reset button with a pin or paper clip, or shutting off the breaker to the thermostat for 30 seconds.

How do I change my thermostat settings?

0:153:29Using Household Electronics : Setting Your Thermostat - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe go press down to go down in temp. As. Far as the fan. This is another big deal that a lot ofMoreWe go press down to go down in temp. As. Far as the fan. This is another big deal that a lot of people don't always understand. You have auto and you have on auto of course will let the thermostat.

How do you reprogram a White Rodgers thermostat?

To program your White-Rodgers thermostat, press the PRGM button on the thermostat for a basic thermostat. For the touchscreen White-Rodgers models, press the SYSTEM button to the mode you want to program and use the buttons to adjust the parameters.

How do I reset my White Rodgers thermostat?

How to Reset the Classic 80 & 70 Series White Rodgers ThermostatLong press the Up or Down arrow and the Time button together.Keep pressing until the display goes blank and then comes back alive. This might take 15 seconds.The configurations have now been reset.

Should my thermostat be on auto or on?

If you want to keep the energy bills low, you should set the thermostat to 'Auto'. However, if you prefer more even distribution of heat inside the house, it's better that you set the thermostat setting to 'On'.

Why does my thermostat setting not match my home's temperature?

Poor air flow, bad sensors, or other broken components can also cause room temperatures to be different than your thermostat setting. The biggest clue that your furnace is the culprit is your heating bill.

What does the hold button do on a thermostat?

This is where the “Hold” button on your thermostat comes into play. By pressing “Hold”, your thermostat will lock in the temperature it's currently at until you change it again. When you are ready for your normal schedule to resume, simply press the “Run” button and return to your typical programming.

How do you reset a White Rodgers thermostat Model 1f80 361?

0:040:20Classic 80 Series - 1F80-361 - How Do I Reset My Thermostat - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo reset your thermostat to factory settings press and hold the up down and time buttons at the sameMoreTo reset your thermostat to factory settings press and hold the up down and time buttons at the same time until the screen goes.

How do you use an old White Rodgers thermostat?

0:030:46The White Rodgers 1F56N-444 Thermostat - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe current temperature. There are two switches above the face of the thermostat. One on the left toMoreThe current temperature. There are two switches above the face of the thermostat. One on the left to control the fan operation. And one on the right to switch between heating.

Why is my White Rodgers thermostat not working?

Check the Batteries Most White-Rodgers digital thermostats run on AA batteries, which can cause the unit to malfunction if they're low or dead. Look for a low battery indicator on the screen if you have an electronic thermostat.

How do I get my White Rodgers thermostat off hold?

If you can't set the hold on your thermostat, try to set it in heat or cool mode. Regardless of the user schedule, a permanent hold on White Rodger remains. Press the RUN button if you want to reset a permanent hold.

What is common low-cost setting for cooling on thermostat?

The common low temperature setting for regions where it gets in the 90s is 78 degrees.

When I set the temperature for air conditioning, does a higher temperature lead to less cooling?

Yes, when setting a higher temperature, this will lead to less cooling.

How should you set your thermostat in the winter?

When you’re at home during the daytime, try to keep the thermostat set between 68° and 72° F (20-22° C). At night or when you’re away, set it to 62...

What’s a good temperature setting for a thermostat in the summer?

The U.S. Department of Energy recommends keeping your thermostat at 78° F (26° C) while you’re at home to stay cool and save money and energy. To b...

How to cool a home thermostat?

You can prep the system to cool the home by moving the switch or pressing the button until you reach the “cool” setting. You will see a number on the thermostat display. This number is the ambient temperature in your home. Use the up and down arrows on the thermostat to set the temperature you want the home to reach.

How to set the temperature on a thermostat?

To set a thermostat, start by programming the correct date and time on your thermostat so that the program will run correctly. Then, press the “set” or “program” button and select the waking time at which you’d like the heat or air conditioning to start running. Next, press “set” again to set the temperature.

How many times can you set the thermostat?

Once you finish setting the weekday schedule, the thermostat will prompt you to set the same four times—wake, leave, return, and sleep—for the weekend. As with the other settings, keep using the “set” or “program” button in order to advance the menu and keep using the arrows to adjust the times and temperatures.

Why do you need a thermostat?

Learn more... A thermostat activates your furnace or air conditioner to come on at pre-set times determined by temperature changes in your home or office. Energy experts agree that setting your thermostat to adjust to different temperatures when you're home and away helps to save money on utility bills.

How to lower temperature at night?

Lower the temperature at night by 1-2 degrees no matter the season. For example, if you set your thermostat to 68 °F (20 °C), lower it to 66 °F (19 °C). This helps you save on your electric bill, and it can also help you sleep more comfortably.

How to turn on a fan?

With fan options, you will most likely have “on” or “auto.” By choosing “on,” you will engage the fan on your system to circulate air through the home without heating or cooling it. The fan will run for as long as the “on” option is engaged. The “auto” option will only engage the fan when either the heat or air conditioning turns on and needs to be circulated.

What does EM mean on a thermostat?

This setting corresponds to a separate electric heating unit in the home in the event that the larger system breaks or freezes over during winter. While it does not hurt to test the emergency heating option periodically, you should stick to the standard heat setting for day-to-day use.

What to Keep in Mind When Installing and Programming Your Thermostat

Here are some basic recommendations to consider before you choose a new programmable thermostat or change your existing thermostat setting:

Summer Thermostat Programming

It’s challenging to keep your air conditioning system efficient and use it in moderation during the sweltering hot summer months. The smaller the difference between the outside and indoor temperature, the more energy—and money—you'll save. Keep these tips in mind when cooling your home:

Winter Thermostat Programming

When the colder months send you shivering into your home, you don’t want to walk into a freezer, and you definitely want a comfort setting at home. Follow these tips for programming your thermostat in the winter to lower your heating bill.

Thermostat Settings While You're Away From Home

One of the most useful features of a programmable thermostat is the ability to program the thermostat for when you’ll be away from home for longer periods of time. The exact options for programming vary by thermostat model—read your user manual to take advantage of all the "away" options your thermostat offers.

Remote Programming for Smart Thermostats

Today's thermostats offer even more options to help you increase your home's energy efficiency and energy savings. A digital thermostat has multiple options for adjustments and programming, but can be difficult to program without an instruction manual. A smart thermostat is Wi-Fi-enabled and a wise, energy saving addition to your smart home.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9
8.3.21PHP Version1.54sRequest Duration2MBMemory UsageGET {post}Route
  • warninglog[09:14:51] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[09:14:51] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[09:14:51] LOG.warning: Callables of the form ["Swift_SmtpTransport", "Swift_Transport_EsmtpTranspor...
  • warninglog[09:14:51] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[09:14:51] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[09:14:51] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[09:14:51] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[09:14:51] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[09:14:51] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[09:14:51] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[09:14:51] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[09:14:51] LOG.warning: mt_rand(): Passing null to parameter #2 ($max) of type int is deprecated in ...
  • Booting (14.69ms)
  • Application (1.53s)
  • 1 x Application (99.02%)
    1.53s
    1 x Booting (0.95%)
    14.69ms
    7 templates were rendered
    • themes.DevBlog.content.post (resources/views/themes/DevBlog/content/post.blade.php)34blade
      Params
      0
      post
      1
      postContent
      2
      author
      3
      updated_at
      4
      bing_rich_snippet_text
      5
      bing_rich_snippet_link
      6
      bing_related_keywords
      7
      google_related_keywords
      8
      bing_news_title
      9
      bing_news_description
      10
      bing_videos
      11
      bing_images
      12
      bing_search_result_title
      13
      bing_search_result_description
      14
      bing_search_result_url
      15
      bing_paa_questions
      16
      bing_paa_answers
      17
      bing_slider_faq_questions
      18
      bing_slider_faq_answers
      19
      bing_pop_faq_questions
      20
      bing_pop_faq_answers
      21
      bing_tab_faq_questions
      22
      bing_tab_faq_answers
      23
      google_faq_questions
      24
      google_faq_answers
      25
      google_rich_snippet
      26
      google_search_result
      27
      indexedArray
      28
      total_images
      29
      total_videos
      30
      settings
      31
      url_current
      32
      menus
      33
      sidebar
    • themes.DevBlog.layouts.master (resources/views/themes/DevBlog/layouts/master.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.head (resources/views/themes/DevBlog/panels/head.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.header (resources/views/themes/DevBlog/panels/header.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.navbar (resources/views/themes/DevBlog/panels/navbar.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.footer (resources/views/themes/DevBlog/panels/footer.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.scripts (resources/views/themes/DevBlog/panels/scripts.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    uri
    GET {post}
    middleware
    web, checkdate
    as
    post.show
    controller
    App\Http\Controllers\Frontend\json_data\PostController@show
    namespace
    where
    file
    app/Http/Controllers/Frontend/json_data/PostController.php:18-166
    7 statements were executed1.5s
    • select * from `posts` where `published_at` <= '2025-06-07 09:14:51' and `slug` = 'how-do-i-program-my-dico-thermostat' and `posts`.`deleted_at` is null limit 1
      2.64ms/app/Providers/RouteServiceProvider.php:54receivinghelpdeskask
      Metadata
      Bindings
      • 0. 2025-06-07 09:14:51
      • 1. how-do-i-program-my-dico-thermostat
      Backtrace
      • 15. /app/Providers/RouteServiceProvider.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/Router.php:842
      • 19. Route binding:39
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/framework/src/Illuminate/Foundation/Http/Middleware/VerifyCsrfToken.php:78
    • select * from `json_post_contents` where `json_post_contents`.`post_id` = 168477 and `json_post_contents`.`post_id` is not null and `rewrite_id` = 0
      4.79msmiddleware::checkdate:30receivinghelpdeskask
      Metadata
      Bindings
      • 0. 168477
      • 1. 0
      Backtrace
      • 19. middleware::checkdate:30
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/jetstream/src/Http/Middleware/ShareInertiaData.php:61
      • 22. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/Middleware/SubstituteBindings.php:50
    • select * from `nova_menu_menus` where `slug` = 'header' limit 1
      1.35ms/vendor/outl1ne/nova-menu-builder/src/helpers.php:32receivinghelpdeskask
      Metadata
      Bindings
      • 0. header
      Backtrace
      • 15. /vendor/outl1ne/nova-menu-builder/src/helpers.php:32
      • 17. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 19. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
      • 20. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:205
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`menu_id` = 1 and `nova_menu_menu_items`.`menu_id` is not null and `parent_id` is null order by `parent_id` asc, `order` asc, `name` asc
      1.28ms/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Bindings
      • 0. 1
      Backtrace
      • 19. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 20. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 22. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 24. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`parent_id` in (1) order by `order` asc
      880μs/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Backtrace
      • 24. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 25. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 27. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 28. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 29. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select `id`, `post_title`, `slug` from `posts` where `status` = 'publish' and `posts`.`deleted_at` is null order by RAND() limit 10
      1.49s/app/View/Composers/SidebarView.php:22receivinghelpdeskask
      Metadata
      Bindings
      • 0. publish
      Backtrace
      • 14. /app/View/Composers/SidebarView.php:22
      • 15. /app/View/Composers/SidebarView.php:12
      • 16. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:124
      • 17. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:162
      • 20. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:177
    • select * from `fake_users` where `fake_users`.`id` = 39823 limit 1
      760μsview::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15receivinghelpdeskask
      Metadata
      Bindings
      • 0. 39823
      Backtrace
      • 21. view::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15
      • 23. /vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:108
      • 24. /vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
      • 25. /vendor/livewire/livewire/src/ComponentConcerns/RendersLivewireComponents.php:69
      • 26. /vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:61
    App\Models\FakeUser
    1
    Outl1ne\MenuBuilder\Models\MenuItem
    1
    Outl1ne\MenuBuilder\Models\Menu
    1
    App\Models\JsonPostContent
    1
    App\Models\Post
    11
        _token
        RlFVwENpK7pK1t9s9wUqH3DPXr8TAsFhrivFuPVN
        _previous
        array:1 [ "url" => "https://receivinghelpdesk.com/ask/how-do-i-program-my-dico-thermostat" ]
        _flash
        array:2 [ "old" => [] "new" => [] ]
        PHPDEBUGBAR_STACK_DATA
        []
        path_info
        /how-do-i-program-my-dico-thermostat
        status_code
        200
        
        status_text
        OK
        format
        html
        content_type
        text/html; charset=UTF-8
        request_query
        []
        
        request_request
        []
        
        request_headers
        0 of 0
        array:25 [ "cookie" => array:1 [ 0 => "_pk_id.64.7c30=e8101429b7862cf5.1749267885.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6InhzY3FlL21VdUZENXgvMDJaN1o3a3c9PSIsInZhbHVlIjoiemd0VnRxOW1uQlVWR1ZENWZ4Z2xVNmdRbFV6ZjlOUTJ1dGNqWFdXb2E2TmtpQjB6Tzh2SSs5NHJKcU1KeUo4aE9rNjJJN0ErdWlDdnFpbURML09OWEs2azJoZ01yaWdJcFJPNHM2UXhIM2ZEUXBxTWRlczhlSmU0UzY2VFFSdEEiLCJtYWMiOiJiMDY5Mzg5ZWU5Y2NmMGQ1ZDE3ZmI1MGE1ZmEwODA2YjQ0YzI3MmU0Mzk2YzZkZjdkMjkxMDIyYWJmNzk0OTk3IiwidGFnIjoiIn0%3D; askhelpdesk_session=eyJpdiI6IlpyT0xpYWljQmRwbjVNYTFVQWkyNXc9PSIsInZhbHVlIjoiOFlUTm1kc0VaOUNRNm9qWTBLeGpGdTQ4aXZrazdRTEVTbTFYUTRzdXlFUTdrTHVpTFRRdURKM3R6SEwvK1hycUxMOThuc1F4aDNZWUE3TGlicjN0NjB3L1VweDBoMHUvSXY1TEpqZEViZ004Y0ZHZTUwWGl6RE1HNzJtdUYyMWIiLCJtYWMiOiJhNDIzN2E1NmVkMTc0ZTk5ZGQ3ZWNmMzIxYjA2MjA2YjgwNTEzY2JhYTczM2YxMGYyMDYyMzI2Nzg3NTAwYjgxIiwidGFnIjoiIn0%3D_pk_id.64.7c30=e8101429b7862cf5.1749267885.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6InhzY3FlL21VdUZENXgvMDJaN1o3a3c9PSIsInZhbHVlIjoiemd0VnRxOW1uQlVWR1ZENWZ4Z2xVN" ] "cf-ipcountry" => array:1 [ 0 => "US" ] "cf-connecting-ip" => array:1 [ 0 => "216.73.216.226" ] "cdn-loop" => array:1 [ 0 => "cloudflare; loops=1" ] "sec-fetch-mode" => array:1 [ 0 => "navigate" ] "sec-fetch-site" => array:1 [ 0 => "none" ] "accept" => array:1 [ 0 => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" ] "user-agent" => array:1 [ 0 => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" ] "upgrade-insecure-requests" => array:1 [ 0 => "1" ] "sec-ch-ua-platform" => array:1 [ 0 => ""Windows"" ] "sec-ch-ua-mobile" => array:1 [ 0 => "?0" ] "sec-ch-ua" => array:1 [ 0 => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" ] "cache-control" => array:1 [ 0 => "no-cache" ] "pragma" => array:1 [ 0 => "no-cache" ] "accept-encoding" => array:1 [ 0 => "gzip, br" ] "cf-ray" => array:1 [ 0 => "94bd27443dc7e7f4-ORD" ] "priority" => array:1 [ 0 => "u=0, i" ] "sec-fetch-dest" => array:1 [ 0 => "document" ] "sec-fetch-user" => array:1 [ 0 => "?1" ] "cf-visitor" => array:1 [ 0 => "{"scheme":"https"}" ] "connection" => array:1 [ 0 => "close" ] "x-forwarded-proto" => array:1 [ 0 => "https" ] "x-forwarded-for" => array:1 [ 0 => "216.73.216.226, 172.70.100.144" ] "x-server-addr" => array:1 [ 0 => "154.12.239.204" ] "host" => array:1 [ 0 => "receivinghelpdesk.com" ] ]
        request_server
        0 of 0
        array:56 [ "USER" => "runcloud" "HOME" => "/home/runcloud" "SCRIPT_NAME" => "/ask/index.php" "REQUEST_URI" => "/ask/how-do-i-program-my-dico-thermostat" "QUERY_STRING" => "" "REQUEST_METHOD" => "GET" "SERVER_PROTOCOL" => "HTTP/1.0" "GATEWAY_INTERFACE" => "CGI/1.1" "REDIRECT_URL" => "/ask/how-do-i-program-my-dico-thermostat" "REMOTE_PORT" => "38892" "SCRIPT_FILENAME" => "/home/runcloud/webapps/ReceivingHelpDesk/ask/index.php" "SERVER_ADMIN" => "you@example.com" "CONTEXT_DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "CONTEXT_PREFIX" => "" "REQUEST_SCHEME" => "http" "DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "REMOTE_ADDR" => "172.70.100.144" "SERVER_PORT" => "80" "SERVER_ADDR" => "127.0.0.1" "SERVER_NAME" => "receivinghelpdesk.com" "SERVER_SOFTWARE" => "Apache/2.4.63 (Unix) OpenSSL/1.1.1f" "SERVER_SIGNATURE" => "" "LD_LIBRARY_PATH" => "/RunCloud/Packages/apache2-rc/lib" "PATH" => "/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" "HTTP_COOKIE" => "_pk_id.64.7c30=e8101429b7862cf5.1749267885.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6InhzY3FlL21VdUZENXgvMDJaN1o3a3c9PSIsInZhbHVlIjoiemd0VnRxOW1uQlVWR1ZENWZ4Z2xVNmdRbFV6ZjlOUTJ1dGNqWFdXb2E2TmtpQjB6Tzh2SSs5NHJKcU1KeUo4aE9rNjJJN0ErdWlDdnFpbURML09OWEs2azJoZ01yaWdJcFJPNHM2UXhIM2ZEUXBxTWRlczhlSmU0UzY2VFFSdEEiLCJtYWMiOiJiMDY5Mzg5ZWU5Y2NmMGQ1ZDE3ZmI1MGE1ZmEwODA2YjQ0YzI3MmU0Mzk2YzZkZjdkMjkxMDIyYWJmNzk0OTk3IiwidGFnIjoiIn0%3D; askhelpdesk_session=eyJpdiI6IlpyT0xpYWljQmRwbjVNYTFVQWkyNXc9PSIsInZhbHVlIjoiOFlUTm1kc0VaOUNRNm9qWTBLeGpGdTQ4aXZrazdRTEVTbTFYUTRzdXlFUTdrTHVpTFRRdURKM3R6SEwvK1hycUxMOThuc1F4aDNZWUE3TGlicjN0NjB3L1VweDBoMHUvSXY1TEpqZEViZ004Y0ZHZTUwWGl6RE1HNzJtdUYyMWIiLCJtYWMiOiJhNDIzN2E1NmVkMTc0ZTk5ZGQ3ZWNmMzIxYjA2MjA2YjgwNTEzY2JhYTczM2YxMGYyMDYyMzI2Nzg3NTAwYjgxIiwidGFnIjoiIn0%3D_pk_id.64.7c30=e8101429b7862cf5.1749267885.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6InhzY3FlL21VdUZENXgvMDJaN1o3a3c9PSIsInZhbHVlIjoiemd0VnRxOW1uQlVWR1ZENWZ4Z2xVN" "HTTP_CF_IPCOUNTRY" => "US" "HTTP_CF_CONNECTING_IP" => "216.73.216.226" "HTTP_CDN_LOOP" => "cloudflare; loops=1" "HTTP_SEC_FETCH_MODE" => "navigate" "HTTP_SEC_FETCH_SITE" => "none" "HTTP_ACCEPT" => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" "HTTP_USER_AGENT" => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" "HTTP_UPGRADE_INSECURE_REQUESTS" => "1" "HTTP_SEC_CH_UA_PLATFORM" => ""Windows"" "HTTP_SEC_CH_UA_MOBILE" => "?0" "HTTP_SEC_CH_UA" => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" "HTTP_CACHE_CONTROL" => "no-cache" "HTTP_PRAGMA" => "no-cache" "HTTP_ACCEPT_ENCODING" => "gzip, br" "HTTP_CF_RAY" => "94bd27443dc7e7f4-ORD" "HTTP_PRIORITY" => "u=0, i" "HTTP_SEC_FETCH_DEST" => "document" "HTTP_SEC_FETCH_USER" => "?1" "HTTP_CF_VISITOR" => "{"scheme":"https"}" "HTTP_CONNECTION" => "close" "HTTP_X_FORWARDED_PROTO" => "https" "HTTP_X_FORWARDED_FOR" => "216.73.216.226, 172.70.100.144" "HTTP_X_SERVER_ADDR" => "154.12.239.204" "HTTP_HOST" => "receivinghelpdesk.com" "HTTPS" => "on" "REDIRECT_STATUS" => "200" "REDIRECT_HTTPS" => "on" "FCGI_ROLE" => "RESPONDER" "PHP_SELF" => "/ask/index.php" "REQUEST_TIME_FLOAT" => 1749267891.8974 "REQUEST_TIME" => 1749267891 ]
        request_cookies
        0 of 0
        array:4 [ "_pk_id_64_7c30" => null "_pk_ses_64_7c30" => null "XSRF-TOKEN" => "RlFVwENpK7pK1t9s9wUqH3DPXr8TAsFhrivFuPVN" "askhelpdesk_session" => "Bl27ZaIevV9EoIrOcJCaSqjOBVTsX5fKhaRFIIrh" ]
        response_headers
        0 of 0
        array:7 [ "content-type" => array:1 [ 0 => "text/html; charset=UTF-8" ] "cache-control" => array:1 [ 0 => "private, must-revalidate" ] "date" => array:1 [ 0 => "Sat, 07 Jun 2025 03:44:51 GMT" ] "pragma" => array:1 [ 0 => "no-cache" ] "expires" => array:1 [ 0 => -1 ] "set-cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6ImpWeUROalhmVW5RVUk1ZmNCYWRodnc9PSIsInZhbHVlIjoicWpPMGlWbXZjVTdiOUlJZDBhWnUyRm9wYUZXcmNaQ0drNVBVSSt3S0FlNExwN2tBc2lHUlFPOVB4azFKY1dEYzUwK0YvL2RRREIwc1A5Y1JvN3dNN1Q5SHU5UnJ2ZUZuRmxCVk9UcjlKeEVlVlNXb0E5SnloZ3RJMDlEakhYZnciLCJtYWMiOiI1MmFiMDRlYmQyMmZlYzgzNjI4NmVjYmU4YTkxZjZjNTM5YThlYjBjOTViMGU0OGU0MmEyMTNkZjUxYmZmOGE4IiwidGFnIjoiIn0%3D; expires=Sat, 07-Jun-2025 05:44:53 GMT; Max-Age=7200; path=/; samesite=laxXSRF-TOKEN=eyJpdiI6ImpWeUROalhmVW5RVUk1ZmNCYWRodnc9PSIsInZhbHVlIjoicWpPMGlWbXZjVTdiOUlJZDBhWnUyRm9wYUZXcmNaQ0drNVBVSSt3S0FlNExwN2tBc2lHUlFPOVB4azFKY1dEYzUwK0YvL" 1 => "askhelpdesk_session=eyJpdiI6InlMWCtqSXphaTl6RDBWUlhFVGlDRVE9PSIsInZhbHVlIjoicUxqUm5PeXFTUm5zWWtRZmlscDNIZSt2U3RGaVBFUUJZUkRKYU1ReXZ0dlRpeFpiWU1jVUd4c2x4aDFadGw4aW9aTktBNXhISXh1MUJFMWhPT1NHV0RFaW1GMXlRWGZEYnFzbHBEOVh4cmRDdEI1V0FXV2E1bmI1UzhzMXB0TGsiLCJtYWMiOiI4NjJkMTk2MmNlMTcxNGUyODM0ODM0Y2NjN2RmZTMwNThjMTY1YzM2YTVkNWMxNGI1YzFmOGQ1NTlkYzZjZDNmIiwidGFnIjoiIn0%3D; expires=Sat, 07-Jun-2025 05:44:53 GMT; Max-Age=7200; path=/; httponly; samesite=laxaskhelpdesk_session=eyJpdiI6InlMWCtqSXphaTl6RDBWUlhFVGlDRVE9PSIsInZhbHVlIjoicUxqUm5PeXFTUm5zWWtRZmlscDNIZSt2U3RGaVBFUUJZUkRKYU1ReXZ0dlRpeFpiWU1jVUd4c2x4aDFadGw4" ] "Set-Cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6ImpWeUROalhmVW5RVUk1ZmNCYWRodnc9PSIsInZhbHVlIjoicWpPMGlWbXZjVTdiOUlJZDBhWnUyRm9wYUZXcmNaQ0drNVBVSSt3S0FlNExwN2tBc2lHUlFPOVB4azFKY1dEYzUwK0YvL2RRREIwc1A5Y1JvN3dNN1Q5SHU5UnJ2ZUZuRmxCVk9UcjlKeEVlVlNXb0E5SnloZ3RJMDlEakhYZnciLCJtYWMiOiI1MmFiMDRlYmQyMmZlYzgzNjI4NmVjYmU4YTkxZjZjNTM5YThlYjBjOTViMGU0OGU0MmEyMTNkZjUxYmZmOGE4IiwidGFnIjoiIn0%3D; expires=Sat, 07-Jun-2025 05:44:53 GMT; path=/XSRF-TOKEN=eyJpdiI6ImpWeUROalhmVW5RVUk1ZmNCYWRodnc9PSIsInZhbHVlIjoicWpPMGlWbXZjVTdiOUlJZDBhWnUyRm9wYUZXcmNaQ0drNVBVSSt3S0FlNExwN2tBc2lHUlFPOVB4azFKY1dEYzUwK0YvL" 1 => "askhelpdesk_session=eyJpdiI6InlMWCtqSXphaTl6RDBWUlhFVGlDRVE9PSIsInZhbHVlIjoicUxqUm5PeXFTUm5zWWtRZmlscDNIZSt2U3RGaVBFUUJZUkRKYU1ReXZ0dlRpeFpiWU1jVUd4c2x4aDFadGw4aW9aTktBNXhISXh1MUJFMWhPT1NHV0RFaW1GMXlRWGZEYnFzbHBEOVh4cmRDdEI1V0FXV2E1bmI1UzhzMXB0TGsiLCJtYWMiOiI4NjJkMTk2MmNlMTcxNGUyODM0ODM0Y2NjN2RmZTMwNThjMTY1YzM2YTVkNWMxNGI1YzFmOGQ1NTlkYzZjZDNmIiwidGFnIjoiIn0%3D; expires=Sat, 07-Jun-2025 05:44:53 GMT; path=/; httponlyaskhelpdesk_session=eyJpdiI6InlMWCtqSXphaTl6RDBWUlhFVGlDRVE9PSIsInZhbHVlIjoicUxqUm5PeXFTUm5zWWtRZmlscDNIZSt2U3RGaVBFUUJZUkRKYU1ReXZ0dlRpeFpiWU1jVUd4c2x4aDFadGw4" ] ]
        session_attributes
        0 of 0
        array:4 [ "_token" => "RlFVwENpK7pK1t9s9wUqH3DPXr8TAsFhrivFuPVN" "_previous" => array:1 [ "url" => "https://receivinghelpdesk.com/ask/how-do-i-program-my-dico-thermostat" ] "_flash" => array:2 [ "old" => [] "new" => [] ] "PHPDEBUGBAR_STACK_DATA" => [] ]