How do you pick a lock on a Hon filing cabinet?
- Place a 1/8-inch drill bit into your hand drill and place the tip of the drill bit on the center of the keyhole on the lock.
- Drill a hole straight through the lock.
- Place the blade of a screwdriver into the hole and attempt to turn the lock counterclockwise.
Full Answer
How to install a Hon file cabinet lock?
of the front of the cabinet. (Visible when the drawers are open.) 3. If the catch clip is bent, bend it back into place. The catch clip needs to fit into the slot for it on the back of the drawer front. 4. A bent lock bar could also cause the problem. If the lock bar is bent, bend it back to the original position. 5.
How do you unlock a filing cabinet?
- Place a piece of masking tape over the lock. Press it down firmly, so you can see the small circular area in the center of the barrel.
- Drill into the lock at medium speed for approximately 3/4 inch.
- Continue drilling at a slow speed until you feel the drill bit catch the latch bar, which will pop open the lock.
How to fix a lock on a filing cabinet?
How to Replace a Filing Cabinet Lock
- Open the cabinet drawer that is closest to the lock. If you don't have the key, and the cabinet is locked, you have several options.
- Grasp the C-shaped clip at the back of the lock with pliers. ...
- Install your lock. ...
- Hold the C-clip flush against the inside wall of the cabinet. ...
How to install a filing cabinet lock?
How to Install a Filing Cabinet Lock
- Find The Knockout for the Lock. To access the knockout for the filing cabinet, remove the top drawer of the cabinet. ...
- Install the Lock. To install the filing cabinet lock, insert the lock cylinder into the knockout hole. ...
- Replace the Top Drawer. After installing the lock, replace the top drawer of the cabinet. ...
How can I open a locked file cabinet without the key?
To pick your filing cabinet lock, start by straightening out a paperclip and leaving one of the ends curved. Then, hold the paperclip vertically and insert the curved end into the keyhole, which will push down on the pins inside.
How do you pick an office file cabinet lock?
0:341:42Lock Picking Pick Open Office File Cabinet in Less than 1 ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust move it a little bit back and forth. And i've already got several of them. In place because iMoreJust move it a little bit back and forth. And i've already got several of them. In place because i can feel. It. Turning and there you go.
How do you pick an antique cabinet lock?
1:024:43447. How to pick open a simple single lever Antique Vintage ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipA broken key extractor i'll just use them for poking and prodding because i do like to do a fair bitMoreA broken key extractor i'll just use them for poking and prodding because i do like to do a fair bit of poking and prodding. So if you was going to pick this and it was on the inside of your. Door.
How do you pick a lock with file cabinet paper clips?
How to Pick a Filing Cabinet Lock? – Only 4 StepsStep 1: Insert the file of the nail clipper on the bottom part of the keyway with the tip facing downward.Step 2: Adjust the file of the nail clipper in a proper position.Step 3: Push the lock pins by moving the file of the nail clipper upward and downward.More items...
How do you pick a lock without tools?
1:006:43How to pick open a lock with paper clip - life hack - YouTubeYouTubeStart of suggested clipEnd of suggested clipOr as straight as you can get it doesn't have to be precise. So Bend that out straight. Once we'veMoreOr as straight as you can get it doesn't have to be precise. So Bend that out straight. Once we've got a straight we're gonna Bend. The two to meet each other. And just fold that down.
How do you pick an old lock with a bobby pin?
0:001:53How to Pick a Lock with a Bobby Pin - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo pick a lock with a bobby pin. First bend open a bobby pin until it makes a 90 degree angle andMoreTo pick a lock with a bobby pin. First bend open a bobby pin until it makes a 90 degree angle and remove the rubber piece on the straight end make a slight bend at the tip of the straight. End.
How do you pick a barrel lock?
2:366:37How to Pick a Tubular Lock (Basics) - YouTubeYouTubeStart of suggested clipEnd of suggested clipInsert the pic into the lock slowly allowing the picking needles to map to the corresponding pinMoreInsert the pic into the lock slowly allowing the picking needles to map to the corresponding pin stacks slowly apply turning torque to the pic and the lock should pop.
How to pick a lock for a file cabinet?
How to pick a file cabinet lock? To pick a file cabinet lock, straighten out a paperclip and leave one of the ends curved. Hold the paperclip vertically and insert the curved end into the keyhole, which will push down on the pins inside. You can do the same with a nail clipper file. The truth is, learning how to pick a file cabinet lock is ...
What does it mean to open a file cabinet?
Getting a file cabinet open means starting with the right tools, but fortunately, when we say “tools” we mean one of two things – a paper clip or a nail clipper file! If you’re at the office, finding a paper clip should be no problem whatsoever, and a lot of people have a set of nail clippers in their purse or pocket.
How to put pressure on a bobby pin?
You insert the bobby pin into the lock, then insert the paper clip at the top of the lock to try and feel the pins that are there. Wiggle the paper clip around while keeping the bobby pin inside of the lock. You have to create tension with the bobby pin and put pressure on the pins with the paper clip at the same time.
How to get a curved file into a keyhole?
Once you get a file with a curved tip, insert it into the keyhole and make sure the tip of the point is facing down. Try to get the file as far into the keyhole as possible. You’ll notice that when you’re done, most of the file will be inside of the keyhole.
How to unlock a paper clip?
To find the unlock position, you have to move the paper clip to the right and left until you feel a “smooth” action without any catching. Do this gently so nothing breaks, and once the paper clip turns to the right or left without catching on anything, you’ve found the unlock position.
How many pins do you need to move a cabinet drawer?
At this point, go ahead and move the file up and down. Most locks will have five pins, and you’ll need to move the file up and down until all five pins are moved correctly. If you can move the file up and down effortlessly, it means you’ve been able to move the pins and, therefore, unlock the cabinet drawer.
What to do if the first technique doesn't work?
If the first technique doesn’t work, you can go to Plan B , which is using the file part of a metal nail clipper. You likely already know that learning how to pick a file cabinet lock is much easier when you have some type of metal, pointed object, and the fingernail file on a set of nail clippers is perfect for this purpose.
How to open a locked file cabinet?
You can also use a nail clipper file to learn how to pick a file cabinet lock. Here is how you open your locked cabinet: 1 Use a nail clipper file that is small and slim and has a curved tip. 2 Insert the nail clipper file into the bottom of the keyhole, pushing it in as far as possible. As with the paper clip’s curved edge, use the curved edge of the nail file to feel for the pins inside the lock. 3 Slowly move the file left to right to find the proper fit into the pins. Once you find the right position, the file should easily slide in and out of the lock. This will take some time before you find the right position. 4 Jiggle the file up and down slowly to unlock the mechanism. Most file cabinets have around five locking pins, and you’ll need to push down these five pins to unlock the file cabinet. 5 Move the file into the unlocked position. Generally, you will also hear the locking mechanism collapse, which means that you have successfully unlocked your cabinet.
How to get a spare key for a filing cabinet?
Before you contact the manufacturer, you should have the cabinet model and the number of the lock cylinder ready so that they can check if they can send a spare key.
How to open a lock with a paperclip?
Insert the curved tip of the paperclip into the keyhole of the lock. Make sure that you insert the paperclip vertically so that the curved end pushes down on the lock pins inside. Move the paper clip from left to right to find the right way to push down the pins and open the lock.
How to get pins to fit in lock?
Use a nail clipper file that is small and slim and has a curved tip. Insert the nail clipper file into the bottom of the keyhole, pushing it in as far as possible. As with the paper clip’s curved edge , use the curved edge of the nail file to feel for the pins inside the lock. Slowly move the file left to right to find the proper fit into the pins. ...
What is a bump key?
Bump keys are designed like “skeleton keys,” which means that they can be used on any lock. When you purchase a set of bump keys, look for the key that appears the closest to the lock on your file cabinet. Insert it into the lock and bump and tilt the key around to try and open the lock. However, this method is not 100% foolproof, ...
Can a locksmith open a locked cabinet?
Locksmiths are trained to open locked file cabinets without damaging the structure of the cabinet. They will bring special tools to help them open the file cabinet quickly and easily. However, locksmiths often charge high rates to open locked cabinets.
Joe L
Older HON cabinets Pre-1999 normally use the F26 style plunger lock kits - make sure when you measure the hole that the plastic sleeve is not already installed in the cabinet. The F24 kits we stock now will work in older HON cabinets - they include a spacer adapter allowing the lock to adapt to the larger hole.
Judy Taylor
I need a lock kit for a older model Hon 4 drawer file cabinet. It belongs to an older man that I go to church with. I told him to measure where the line k goes. He told me it was almost an inch and almost 7/8. I don't know if he measured it right or not. Do you have any lock kits that size or would it be another size.
Joe L
Lily, Just add the item to your shopping cart then click on cart at the top of the page - there should be a shipping estimate box for you to enter your state and zip code - we have a variety of shipping methods.
Lily
How much for this lock and to ship in chula vista,ca 91910 part#sku23079 with keys?
Steve Graham
If you need a precut key for the HON E series locks, they may be ordered from this page: http://www.mrlock.com/HUDE.html
How to install a C-clip on a cabinet?
Position the c-clip flush against the inside of the cabinet, with the open end of the c-clip pointing to the lock cylinder. Hold the lock cylinder against the cabinet, and then push the c-clip over the cylinder. There are grooves on the cylinder that the c-clip fits over to provide a secure mount.
Where is the C-clip on a cabinet?
Find the c-clip securing the current lock to the cabinet. The c-clip is around the neck of the lock cylinder inside the cabinet. Pry the c-clip away with a flat-head screwdriver.
How to lock drawers in a kitchen cabinet?
Rotate the key several times to lock and unlock the lower drawers to ensure proper operation. Insert the rear of the top drawer into the cabinet, and then slide the drawer closed. Operate the drawer a couple of times to ensure it operates correctly. Place the contents back in the drawer.
What is a cam lock?
The cam lock engages a mechanism on the inside of the cabinet that locks the lower drawers, while a lock bolt on the cam secures the top drawer. When keys get lost or you want to rekey the cabinet, it is necessary to change the lock.
How to change a lock cylinder?
Step 1. Hold the new lock cylinder in one hand with the grooves on the cylinder neck facing the top. Insert the key into the lock. Rotate the key until the lock tab is pointing up. Insert the lock into the hole in the cabinet.
What is important to consider before unlocking a file cabinet?
Before stepping towards the unlocking process, it is important to consider the advantage and disadvantages to decide whether such suits your situation. Typically, there are several factors you have to consider in choosing the technique to unlock your file cabinet, such as the lock type, the raw material of the file cabinet, among others. ...
How to unlock a cabinet with a knife?
Aim it towards the lock and insert. It will easily unlock the cabinet by gradually shifting it either on clockwise or anti-clockwise directions. Ask from the Manufacturer.
How long does it take to unlock a file cabinet?
However, most of those methods can break your file cabinet, but with little patience plus creativeness, you can surely unlock it within a couple of minutes.
Can you unlock a file cabinet without damage?
If you want to unlock the file cabinet without a single damage, it is better to hire a professional locksmith. Locksmith owns special tools to open the cabinet without causing single damage to its surface. However, a service fee will be charged in return for his service.
